三相电机调速系统设计

本文设计了三相电机调速系统,包括硬件电路、控制程序以及上位机监控三部分;可通过上位机任意给定速度目标值、设置合适的PID比例系数、积分系数以及微分系数,实时显示当前速度、稳态误差以及超调量;若速度超过高限或低于低限,系统会显示报警信息;结果表明:系统可以对三相电机速度进行有效调节。     

旋转工况下小型液冷源设计

设计了一种适用于旋转工况的小型液冷源,该液冷源采用强迫风冷换热器的原理。液冷源液路循环采用闭式系统设计以适应旋转工况的要求,液位检测采用光电式液位传感器,通过单向阀和电磁阀的组合使用可有效防止水锤效应。该系统具有体积小、重量轻、环境适应性强等优点。     

中线在不对称负载作Y连接时的作用

通过实验分析和理论计算,从两个方面说明中线在不对称负载作星形连接时的作用.     

Probing the Microscopic Origin of Gravity via Precision Polarization and Spin Experiments

As in other parts of physics, we advocate the interaction approach: experiments ←→ (… are influenced and their importance is determined by … and vice versa) phenomenology ←→ low-energy effective (field) theory ←→ microscopic theory to probe the microscopic origin of gravity, Using the X-g phenomenological framework, we discuss the tests of equivalence principles. The only experimentally unconstrained degree of freedom is the axion freedom. It has effects on the long-range astrophysical/cosmological propagation of electromagnetic waves and can be tested/measured using the future generation of polarization measurement of cosmic background radiation.The verification or refutal of this axionic effect will be a crucial step for constructing an effective theory and probing the microscopic origin of gravity. The interaction of spin with gravity is another important clue for probing the microscopic origin of gravity. The interplay of experiments, phenomenology and effective theory are expounded. An ideal way to reveal the microscopic origin of gravity is to measure the gyrogravitational ratio of particles, Three potential experimental methods are considered.     

Surface Gravity on the Horizon of η- ξ Spacetime

We investigate the two methods of defining the surface gravity ,κ on the horizon, which are the metric definition and the definition given by the spacetime conformal method. It is found that the latter is of greater generality. By this method, we find that ,κ of η- ξ spacetime is equal to the exponent factor α in the coordinate transformation, which confirms the argument that η- ξ spacetime can be considered as the background spacetime for finitetemperature field theories. The reasons why the metric definition of ,κ can not be applied in η- ξ spacetime are presented.     

闭式循环柴油机系统排放计算

采用准维多区燃烧模型，就氮气和氩气的不同配比以及水蒸汽成分对闭式循环柴油机排放氮氧化物的生成影响规律进行了研究得出了一些规律性结论，并探讨了其产生的原因。为在闭式循环条件下，减少氮氧化物生成及进一步减轻海水对二氧化碳吸收器和管路的腐蚀提供了指导。     

对电工学中几个问题的辩析

本文主要计论关于复导钠的确切定义,在任意形热闹法的互相电路中互相负载不对称时V_(0‘0)≠0,及不对称三相电路中点漂移的消除问题提出质疑。     

物质纯重力场部分的能量-动量张量研究

认为物质的质量(能量)存在形式可分为两部分，一部分是以纯物质形式存在的，另一部分是以纯重力场形式存在的.物质质量(能量)这两种形式各自对应着相应的能量 动量张量，物质总的能量-动量张量可表示为Tμν=T(Ⅰ)μν+T(Ⅱ)μν,这里，T(Ⅰ)μν，T（Ⅱ）μν分别代表物质纯物质部分和纯重力场部分的能量-动量张量.通过类比电磁理论，定义：ωμ≡-c2gμ0/g00,并引入一个反对称张量Dμν=ωμ/xν-ων/xμ，则物质纯重力场部分的能量-动量张量为T(Ⅱ)μν=(DμρDρν-gμνDαβDαβ/4 关键词： 能量-动量张量 纯重力场 重力场方程 标量重力势 矢量重力势     

10kw热管—散热器的研制

本文介绍应用热管原理,设计用于冷却10kW速调管的热管—散热器。采用径向热管和紧凑散热器,并利用计算机对紧凑散热器进行了优化设计。为了考验热管的性能和寿命,除了进行一般的性能试验外,还在5kW左右条件下进行1154小时的寿命试验,结果表明热管—散热器性能可靠。计算结果和实测数据具有良好的一致性。