纵向泵浦Cr∶ Nd∶GSGG激光棒的热透镜效应研究

对纵向泵浦Cr∶Nd∶GSGG激光棒的热透镜效应进行了详细的理论分析。对温度分布的函数表达式 ,进行了讨论 ;分析了热引起的应力 ,得到了激光棒破裂的临界功率公式 ;最后对光学畸变进行了分析与讨论 ,推导了光程差计算公式     

双贴合无光焦度校正板在主反射镜前的两镜系统的像差特性

在光学系统中特别是反射系统中经常通过加无光焦度校正板来减少或消除其他元件所产生的像差。讨论了双贴合无光焦度校正板放在主镜前的双反射球面系统，根据像差理论分析了消像差的条件，研究了系统中各种参数的变化对系统高级残余像差的影响。结果表明主镜的相对孔径越大，系统的残余像差增加；正透镜在前的校正板结构优于负透镜在前的结构；选择合适的校正板单透镜的光焦度，可使系统的高级残余像差最小。     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

Analysis on Shack–Hartmann wave-front sensor with Fourier optics

In Shack–Hartmann wavefront sensor (SHWS), the behavior of the irradiance pattern produced by the micro-lens array is important for an accurate centroid estimation. In this paper, the behavior of a micro-lens array in SHWS is analyzed using Fourier optics, and reveals that in addition to the main, expected spots, secondary spots with smaller intensities also appeared as a result of diffraction by the small dimensions of the micro-lens and interference from the different micro-lenses. This result is confirmed by comparing with a irradiance pattern taken from an actual SHWS. The additional error in centroid estimation caused by these secondary spots is discussed and relationship to the parameters of the micro-lens of SHWS is analyzed.     

波导短程透镜球差特性分析及其焦距精确测量方法的研究

本文研究短程透镜的焦点位于端面外的球差特性。对焦点位于波导外部（包括端面）的情况给出了一种精确测量焦距新方法，采用这种方法简单易行，测量精度取决于读数显微镜的读数精度（０．０１ｍｍ）。     

在柔性变焦系统中的压力变焦镜

从理论上和实验上对水冷镜的镜面曲率半径随压力变化的规律作了研究。对压力变形后镜面相对于球面作了波像差分析，分析表明压力变焦镜用于中红外激光系统是合适的     

汉折射波片用于发散光束的偏振像差分析

本文利用光线追迹法,对双折射波片用于发散光束的偏振像差进行了分析,并以标准1/4波片为例,给出了小角入射时的近似处理方法.     

用于X光激光实验的反射式线聚焦光学系统的设计和分析

基于三维光线追迹的象差计算,对卢瑟福实验室用离轴球面反射线聚焦系统作了分析。然后,首次提出了用于X光激光实验的两类新的反射式线聚焦构型,即反射式光楔列阵和光锥列阵系统,并作了计算。最后,对所得结果作了比较和讨论。     

界面反射偏振象差分析

在光学没计中,一般认为在同一光波面上,光束具有相同的振幅和偏振状态。事实上,光束经过许多光学元件后,偏振状态会发生变化,特别是入射角和光程的不同,会导致出射光波面上偏振分布不再均匀,形成偏振象差。本文主要就轴上物点发出的光束经过界面反射后的偏振象差方面进行了分析。     

Corrected mirror systems with double reflection

We propose objectives consisting of two mirrors with central holes for passage of a light beam. The optical layout ensures multiple reflection of rays from both mirrors. We consider several approaches to calculating the design parameters for which three and four aberrations do not occur. The objectives can be used in optical devices operating in the UV and IR regions of the spectrum. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 74, No. 2, pp. 267–270, March–April, 2007.