Wavelength and Waveband Assignment for Ring Networks Based on Parallel Multi‐granularity Hierarchical OADMs

In this paper we study the optimization issues of ring networks employing novel parallel multi‐granularity hierarchical optical add‐drop multiplexers (OADMs). In particular, we attempt to minimize the number of control elements for the off‐line case. We present an integer linear programming formulation to obtain the lower bound in optimization, and propose an efficient heuristic algorithm called global bandwidth resource assignment that is suitable for the design of large‐scale OADM networks.     

Dynamic Waveband Switching in WDM Mesh Networks Based on a Generic Auxiliary Graph Model

Waveband switching (WBS) is a promising technique to reduce the switching and transmission costs in the optical domain of a wavelength-division multiplexing (WDM) network. This paper considers the problem of provisioning dynamic traffic using WBS in a WDM mesh network. The network of interest is a homogeneous WBS network, where each node has the functionality of WBS. The problem is called the dynamic WBS problem, which involves searching waveband-routes or wavelength-routes for the dynamically arriving traffic requests. The objective is to minimize the total switching and transmission costs in the optical domain. To solve the dynamic WBS problem, an auxiliary graph model capturing the network state is proposed. Based on the auxiliary graph, two heuristic on-line WBS algorithms with different waveband grouping policies are proposed, namely the wavelength-first WBS algorithm based on the auxiliary graph (WFAUG) and the waveband-first WBS algorithm based on the auxiliary graph (BFAUG). Simulation results indicate that WBS is an attractive technique which reduces the overall switching and transmission costs by up to 30% in the network. The results also show that the WFAUG algorithm outperforms the BFAUG algorithm in terms of port savings and cost savings.     

Nd:YAG陶瓷与单晶4F3/2–4I13/2跃迁的弱谱线多波长激光性能对比

报道了基于半导体激光端面抽运Nd:YAG的⁴F_3/2–⁴I_13/2 跃迁的弱谱线多波长激光输出. 实验对比了透明陶瓷与单晶材料的激光输出特性, 表明透明陶瓷和单晶材料荧光谱强度的略微差异, 导致了多波长输出时相同两个波长之间的激光强度比在两种材料中的差异. 基于两种耦合输出镜片, 激光阈值都在2 W左右. 在13.5 W的抽运功率下, 基于Nd:YAG透明陶瓷获得了输出功率4.05 W、强度比1 :2的1338与1356 nm双波长激光和输出功率3.65 W、强度比13 : 1的1356与1414 nm 双波长激光, 斜率效率分别达33.9% 和31.9%.     

2μm波段激光薄膜的研制

概述了国内外关于～2μ波段发光的掺Tm^3＋,THo^3＋和Er^3＋等激光晶体镀膜的使用情况,结合我们实验室已有的工作基础,对其设计原理和制备工艺进行了详细分析,制备出了较高性能2．94μm的激光薄膜。     

基于作用距离的红外探测系统工作波段选择方法

选择合适的工作波段对获得性能优越的红外探测系统具有十分重要的意义.通过对红外探测系统与高光谱遥感工作波段的选择原则进行比较,从探测原理出发,结合高光谱遥感类间可分性的波段选择思想,发展了一种基于作用距离的波段选择方法.仿真结果表明,这种方法是可行的,能有效地计算出符合要求的工作波段参数.     

飞机点目标的红外双波段目标识别技术

随着战场环境的日益复杂化,不断发展的隐身与诱饵技术对目标识别技术提出了更高的要求。多通道数据融合技术与红外探测技术在不同方面显示出突出优点,成为目前目标识别领域的主要研究方向。本文综合双通道数据融合技术与红外探测技术,设计了红外双波段目标识别过程,并结合飞机点目标的识别过程进行了说明。     

Two-colour HgCdTe infrared detectors operating above 200 K

The performance of dual waveband HgCdTe photodiodes fabricated using metaloorganic chemical vapour deposition operated at high temperatures is presented. The effect of additional separating layer on the quantum efficiency and cross-talk of the photodiodes is analyzed. The photodiodes with cutoff wavelengths up to 6 μm, good R₀A product, and high quantum efficiency at 200 K have been demonstrated. The temperature dependence of the differential resistance is discussed. It is shown that the multilayer heterojunction P-n-N-n-P structure operating in a simultaneous mode has better performance than a structure operating in a sequential mode.     

波带交换光网络中的保护机制

本论文主要对波带交换光网络中的保护机制进行了一定的研究,提出了基于波带通道的专用保护和共享保护机制和算法,其中在共享保护算法中考虑不同的策略提出了三种不同的算法,即只共享逐跳的保护波长通道的WSP算法,只共享嵌入到波带通道中的保护波长通道的BSP算法和能同时共享两者的BWSP算法。最后进行了相应的网络仿真,讨论并得出BWSP算法的性能是最优的。     

动态业务条件多颗粒度交换光网络性能研究

本文研究了动态业务条件下基于波带、波长两级交换的多颗粒度光交叉连接节点(MG-OXC)的优化设计,并提出了一种适用于多颗粒度交换光网络(MG-ON)的动态路由、波长分配和业务分组(Traffic Grouping)算法.利用实际网络拓扑对上述MG-ON方案进行了数值仿真实验,比较研究了MG-ON与传统OXC节点构成的波长路由光网络(WRON)的动态业务阻塞率性能,结果表明MG-ON的网络性能可以满足动态业务的要求.     

Numerical Simulation of Magnetoresonance Absorption for Multilayered Co/Cu Nanostructures in the Millimeter Waveband

The numerical simulation of the Ferromagnetic Resonance (FMR) absorption in the millimeter waveband has been performed for magnetic multilayered nanostructures. The model taking into account a random bilinear exchange interaction between layers was applied for the theoretical approach elaboration. Results of the simulation are in good agreement with experimental data registered for samples of nanostructure Co/Cu with buffer layer Fe in the frequency band 20-37 GHz. The explanation of the origin of unexpectedly broad magnetoresonance peaks formed in specimen under study is suggested.