自动传输收视率调查系统

综述了当前收视率调查的主要方法 ,提出一种自动传输的收视率调查系统 ,详细介绍了该系统的组成、原理和设计思想 ,并分析了不同实现方法的优点与不足。应用表明 ,该系统在同类产品中具有明显优势     

数码相机原理与系统设计研究

介绍了数码相机的工作原理 ,分析了数码相机的系统结构 ,提出了设计数码相机的处理流程。典型的数码相机系统有镜头、闪光灯、光学取景器、LCD显示屏、图像数据存储扩展设备接口、图像数据传输接口、供电系统以及核心处理器等八个主要模块。数码相机的数据流向从图像传感器开始 ,止于图像数据的存储和传输。数据流的处理主要包括模数转换、光学黑电平钳位、针对镜头的边缘畸变的运算修正、坏像素处理、白平衡处理、伽马校正、色彩合成处理、边缘检测 (锐度检测 )和伪彩色检测 (伪彩色抑制 )、JPEG压缩和图像存储器等模块     

LS SIMD微处理器中的三组指令并发执行的设计

文章介绍了LS SIMD微处理器中实现三组指令并发执行的可能性和必要性，分析了三组指令并发执行给流水线带来的影响，并讨论了控制逻辑对三级指令并发执行的控制及其实现形式。     

基于嵌入式系统的触摸屏驱动设计与实现

为了满足触摸屏性能良好、运行稳定精度高的要求,本文提出了一种基于嵌入式系统的触摸屏驱动设计与实现方法。本方案以S3C2410微处理器为核心,采用嵌入式操作系统,设计与实现触摸屏驱动程序,测试证明本驱动工作高效、稳定。     

积层(Build-up)封装工艺的发展及其设计挑战(1)

回顾了自1988年以来的逐次积层(SBU)层压基板的发展过程。文中报告了IBM自2000年采用的这种工艺的开发过程。这些层压基板是一种非均匀性结构,有3部分组成:芯板,积层和表面层,每一部分都是为满足封装应用的需求而开发。薄膜工艺极大提高了SBU层压基板的绕线能力,同时也使得这种工艺非常适合高性能设计。本文着重阐述了IBM在将该工艺用于ASIC和微处理器封装时,在设计、制造和可靠性测试等各个阶段所遇到的挑战。     

Analog Circuit Design Methodology in a Low Power RISC Microprocessor

There are various kinds of analog CMOS circuits in microprocessors. IOs, clock distribution circuits including PLL, memories are the main analog circuits. The circuit techniques to achieve low power dissipation combined with high performance in newest prototype chip in the Super H RISC engines are described. A TLB delay can be decreased by using a CAM with a differential amplifier to generate the match signal. The accelerator circuit also helps to speed up the TLB circuit, enabling single-cycle operation. A fabricated 96-mm² test chip with the super H architecture using 0.35-m four metal CMOS technology is capable of 167-MHz operation at 300 Dhrystone MIPS with 2.0-W power dissipation.     

A rapid turnaround design of a high speed VLSI search processor

Performance of relational database systems is a major impediment to their use in many applications. We have designed and implemented a customized RISC processor to accelerate associative search and aggregation operations for relational database systems. Since the processor is programmable and supports many queries concurrently, a system utilizing tens of such processors is capable of handling thousands of complex search requests simultaneously.

While the design of a VLSI programmable processor is a complex process, research prototyping requires a fast turnaround design process. We took advantage of the logic programming paradigm and the silicon compiler technology to explore and simulate architecture alternatives prior to the actual implementation. The prototyping process allowed us to complete the chip design in nine months. The resulting processor, fabricated in 2 Itm CMOS technology, consists of 91,000 transistors, executes over 18 million predicate evaluations per second, and searches database contents at 74 megabytes per second.     

Image reconstruction from acoustical holograms using microprocessors

An acoustic imaging system using holographic techniques is described. Insonification of the object is achieved using a phased array scanner. Image reconstruction uses Fourier Transformations to produce a 128 × 128 pixel TV display. The system has the ability to focus in the ‘near field’ of its transducer arrays and has a frame rate of approximately 0.3 Hz.     

基于微处理器的遥控水热毯控制系统设计

介绍了一种水热毯的新型控制系统,以AT89C52单片机为核心,配合ADC0809芯片,用双向可控硅控制加热片的工作.系统软件用C语言编制,实现了温度在一定范围内连续可调、定时启/闭、被窝预热等功能.实现了温度智能控制,其温度和定时时间均可在液晶屏上显示.红外遥控电路主芯片采用PT262/PT2272遥控编解码芯片.遥控器的引入实现了系统的远距离控制.     

基于单片机的超声波测距系统的设计

介绍了利用单片机控制的超声波测距系统的原理，由单片机控制时间计数、控制超声波的发射和接收。给出了系统构成，并在数据处理中采用了温度补偿修正。此系统具有易控制、工作可靠、测量精度高的优点。