A calorimetric study of phase evolution in a WE43 Mg alloy

A DSC investigation has been performed on a Mg–RE–Y–Zr (RE=rare earth) technical alloy WE43. Hardness trend during isothermal treatments has been correlated to the calorimetric traces evolution and to the forming β phases with its precursors. Oversaturation of solute elements occurs at temperatures higher than 150±C, on cooling at room temperature after the anneals. Activation energies, found under non-isothermal conditions on artificially aged samples, suggest a slow transformation velocity, while the hardness response is relatively fast.     

Influence of surface treatments in the initial stages of anodizing Al–Ag alloys in neutral electrolytes

Using voltage-time responses and cyclic voltammetry, the initial stages of anodizing of Al–2.1 at.% Ag and Al–4 at.% Ag alloys are shown to depend upon the heat treatment of the alloys and the pre-treatment of the alloy surfaces. Chemical polishing of solution-treated alloys leads to relatively uniform anodic oxidation on a relatively smooth alloy surface, in the absence of significant effects of coarse, silver-rich intermetallics. In contrast, losses of current to oxygen generation arise for the roughened alloy surface from mechanical polishing. With ageing, secondary reactions at the relatively silver-rich intermetallics are more prevalent, although the effects on the voltage-time response depend upon the balance between processes occurring on the matrix and intermetallic regions, including film growth, oxygen generation within the anodic film, film damage due to release of oxygen, dissolution of silver species and re-growth of damaged film.     

Poly(pentahydropyrimidine)-Based Hybrid Hydrogel with Synergistic Antibacterial and Pro-Angiogenic Ability for the Therapy of Diabetic Foot Ulcers

Bacterial infection and impaired angiogenesis make the treatment of diabetic foot ulcers (DFU) extremely challenging. Cationic polymers are expected to treat infected wounds due to their excellent antibacterial properties, but still, it is difficult to meet the therapeutic needs of pro-angiogenesis and anti-infections due to their simple construction units and outmoded synthesis methods. Herein, a cationic poly(pentahydropyrimidine) (PPHP) library with strong modifiability is synthesized to construct a hybrid hydrogel with synergistic therapeutic effects for the treatment of infected DFUs. It is found that the as-synthesized hybrid hydrogel can up-regulate angiogenesis-related gene (HIF-1, VEGF, and bFGFR/bFGF) expression and targeted disruption of bacterial cell membranes, which finally promotes the healing of infected DFU (wound healing rate: 92%) within 10 days. This hydrogel, thus, holds great promise in developing new strategies to significantly enhance the treatment of DFU and other bacterial-infected pathological diagnoses.     

Cellulose microfibrils from banana farming residues: isolation and characterization

Cellulose microfibrils have been prepared from banana rachis using a combination of chemical and mechanical treatments. The morphology and structure of the samples were characterized using transmission electron microscopy, atomic force microscopy, and X-ray diffraction. Fourier-transformed infrared spectroscopy (FTIR) was used to characterize the chemical modifications of the samples after each treatment. Suspensions of bundled or individualized 5-nm-wide microfibrils were obtained after homogenization (PH) whereas an organosolv (PO) treatment resulted in shorter aggregates of parallel cellulose microcrystallites. The sharper rings in the X-ray diffraction pattern of the PO-treated sample suggest a higher crystallinity due to a more efficient removal of hemicelluloses and dissolution of amorphous zones by the acid treatment. Both microfibrils and microcrystals prepared by both methods can be used as reinforcing filler in nanocomposite materials.     

Improved bias stress stability of In–Ga–Zn–O thin film transistors by UV–ozone treatments of channel/dielectric interfaces

Possibility of improving the bias stress stability of amorphous In–Ga–Zn–O thin film transistors (a-IGZO TFTs) was explored by irradiating the channel/dielectric interface with ultraviolet (UV) light during the device fabrication process. The UV treatment of the channel/dielectric interface did not cause significant changes in the device performance itself. However, when the TFTs were tested under prolonged gate bias stress, the device with longest UV treatment showed the smallest time dependence of threshold voltage shift. This accompanied the smallest changes in the field effect mobility and subthreshold swing with extended bias stress. Such improvements in bias stress stability are attributed to the modification of the channel/dielectric interface due to the UV-generated ozone that in turn decreased the interface trap density and structurally modified the interface region on the dielectric side to prevent the redistribution of the trapped charges.     

Various ways to strengthen the fiber‐matrix interface for enhanced composite performance

Surface treatment (ST) of carbon fibers (CF) leads to an enhancement in fiber‐matrix adhesion. However, it deteriorates the strength of a fiber which makes its reinforcing action less effective in a composite. These effects in opposite directions control the net strength of a composite, and hence, the treatment has to be judiciously applied, which would enhance the first factor and minimize the second one. Authors have recently reported on four effective techniques (using various doses) such as treatments with nanoparticles of Ytterbium fluoride (YbF₃)_, cold remote nitrogen–oxygen plasma (CRNOP), γ‐ray irradiation and nitric acid oxidation. Amongst these methods, nitric acid oxidation is studied in depth in the literature, and γ‐ray irradiation is sparingly studied. However, nano‐YbF₃ and CRNOP were first time reported in the literature by the authors. However, comparative aspects of all these methods were not addressed. In this paper, these aspects in details are discussed to lay down the right criteria for selection of a ST technique of CF to design the desired performance of a composite. The composites with polyetherimide and treated CF (including untreated) were developed and evaluated for various properties including tribological one. Treated CF based composites exhibited excellent mechanical and tribological properties (under harsh operative conditions with wear rates ≈ 1 × 10^?15 m³/Nm and μ ≈ 0.09). It was concluded that for strength and tribo‐performance, different treatments and doses are to be employed. Overall nanosized‐YbF₃ treatment of CF proved to be the most promising ST method. Copyright © 2013 John Wiley & Sons, Ltd.     

Microstructure performance and formation mechanism of laser alloying rare earth oxides modified nanocrystalline layer on TA7

Nanoscale particles (NP) were observed in a Ni60–Ag–Si₃N₄–Y₂O₃ laser alloying (LA) layer on a TA7 titanium alloy, NP usually locate on the grain boundaries, which are able to block the motion of dislocation in a certain extent. Such layer mainly consisted of γ-Ni, TiN, γ-(Fe, Ni), TiAg and lots of amorphous phases. The wear resistance of such layer with laser scanning speed 3 mm/s was better than that of a LA layer with 6 mm/s, which was mainly ascribed to an uniform microstructure and less defect of layer. The high laser scanning speed made the existing time of laser molten pool be shorter than before, favoring the formation of a fine microstructure. However, the defects, such as pores were produced in LA layer (higher scanning speed), decreasing the wear resistance.     

Syntheses and flame retarding properties of DOPO polymers,melamine polymers,and DOPO‐melamine copolymers

The 9,10‐dihydro‐9‐oxa‐10‐phosphaphenanthrene‐10‐oxide (DOPO) polymers, melamine polymers, and DOPO‐melamine copolymers have been successfully synthesized, and their flame retarding properties have also been investigated by blending with polypropylene (PP)/styrene‐ethylene‐butylene‐styrene (SEBS) alloys. Experimental results establish that all of them are good polymeric flame retardants. No blooming or color stains occur when they are incorporated into PP/SEBS alloys. Among lab‐made polymeric flame retardants, DOPO‐ melamine copolymers exhibit the best thermal stability and nonflammability. PP/SEBS alloys containing DOPO‐melamine copolymers display comparable thermal resistance and flame retarding behavior (T_d = 290°C; char yield: 15.6%, LOI: 23, and flammability: UL‐94 V0) as the alloys containing common commercial flame retardants (i.e., DOPO, melamine, and ammonium polyphosphate). Copyright © 2013 John Wiley & Sons, Ltd.     

An Edible Oil Enriched with Lycopene from Pink Guava (Psidium guajava L.) Using Different Mechanical Treatments

According to the regulations of the United States Food and Drug Administration (FDA), organic solvents should be limited in pharmaceutical and food products due to their inherent toxicity. For this reason, this short paper proposes different mechanical treatments to extract lycopene without organic solvents to produce an edible sunflower oil (SFO) enriched with lycopene from fresh pink guavas (Psidium guajava L.) (FPGs). The methodology involves the use of SFO and a combination of mechanical treatments: a waring blender (WB), WB+ high-shear mixing (HSM) and WB+ ultrafine friction grinding (UFFG). The solid:solvent (FPG:SFO) ratios used in all the techniques were 1:5, 1:10 and 1:20. The results from optical microscopy and UV–vis spectroscopy showed a correlation between the concentration of lycopene in SFO, vegetable tissue diameters and FPG:SFO ratio. The highest lycopene concentration, 18.215 ± 1.834 mg/g FPG, was achieved in WB + UFFG with an FPG:SFO ratio of 1:20. The yield of this treatment was 66% in comparison to the conventional extraction method. The maximal lycopene concentration achieved in this work was significantly higher than the values reported by other authors, using high-pressure homogenization for tomato peel and several solvents such as water, SFO, ethyl lactate and acetone.     

生物质热化学转化制备生物燃料及化学品

生物质是环境友好的可再生能源.近年来相关研究不断升温,文献报道量激增.本文在现有文献综述及近期报道的基础上,从利用热化学方法由生物质获得燃料油及化学品的角度对各方案进行了归纳、适当补充及简要述评,重点介绍了生物油催化裂解精制、水相重整制备烷烃、超临界水/水热制备化学品3个领域.