用DSP实现多目标实时跟踪

介绍了在 TMS3 2 0 C62 0 3上实现 4个目标的快速跟踪技术。为了提高实时性和精确度 ,采用线性汇编优化实现。1个 3 2 0× 160主窗口的 DSP平均处理时间为 2 m s,3个 60× 60副窗口的 DSP平均处理时间各为 0 .4ms,实现了复杂背景下低对比度目标的快速跟踪。实验结果证明跟踪效果良好 ,解决了以前窗口开不大、跟踪速度慢的问题     

A Bluetooth Based Sensor Network for Civil Infrastructure Health Monitoring

Communicating with sensors has long been limited either to wired connections or to proprietary wireless communication protocols. Using a ubiquitous and inexpensive wireless communication technology to create Sensor Area Networks (SANs) will accelerate the extensive deployment of sensor technology. Bluetooth, an emerging, worldwide standard for inexpensive, local wireless communication is a viable choice for SANs because of its inherent support for some of the important requirements – low power, small form factor, low cost and sufficient communication range. In this paper we outline an approach, centered on the Bluetooth technology, to support a sensor network composed of fixed wireless sensors for health monitoring of highways, bridges and other civil infrastructures. We present a topology formation scheme that not only takes into account the traffic generated by different sensors but also the associated link strengths, buffer capacities and energy availability. The algorithm makes no particular assumptions as to the placement of nodes, and not all nodes need to be in radio proximity of each other. The output is a tree shaped scatternet rooted at the sensor hub (data logger) that is balanced in terms of traffic carried on each of the links. We also analyze the scheduling, routing and healing aspects of the resulting sensor-net topology.     

分组密码算法芯片验证

介绍了分组密码算法芯片验证的流程、内容和方法,详细介绍了分组密码算法芯片的验证技术——测试基准。     

基于人文关怀的信号配时方法研究

在传统的信号配时中，都是以减少车辆的总延误为目标，这样并不能很好地体现出整个社会中人的时间价值。现以减少所有通过交叉口的出行者的总延误为目标，在传统的信号配时方案的基础上，提出了一套新的配时方案，同时以减少全部出行者的总延误时间为目标给出了相应的延误评价公式，最后以杭州市文一路-古翠路口的实测交通数据进行分析，论证了本配时方案的有效性。     

一种新的PCC-OFDM定时时偏盲估计

多项式相消编码PCC是一种编码技术，在PCC—OFDM调制中，它把将发送的信息调制到一组加权的子载波而不是单个子载波中去。PCC能够显著地降低OFDM对载波频偏的敏感性。本文对PCC—OFDM系统提出了一种新的定时盲估计，估计器是在接收机中的FFT之前进行的。基于PCC—OFDM的符号波形特征，构建定时时偏估计度量函数。最大化度量来估计定时时偏。本估计器不需要训练序列、导频信号或周期前缀。仿真表明，估计器在一个OFDM符号内收敛，且误差较小。     

光纤定时恢复器用声表面波低损耗滤波器

介绍了定时恢复器对声表面波滤波器的基本要求及实现低损耗的方法，并给出了实验结果。     

Tactical problems involving uncertain actions

The purpose of this paper is to solve anm-silent versusn-silent duel with arbitrary accuracy functionsP andQ which are continuously differentiable in [0, 1] with positive derivatives in (0, 1) and such thatP(0)=Q(0)=0,P(1)(0, 1),Q(1)(0, 1). The game can be interpreted as a game in which the players know only that the numbers of their actions have binomial distribution.Part of this paper was written during the author's stay at the Institute of Statistics and Mathematical Economics, University of Karlsruhe, FRG. The author wishes to thank Prof. S. Trybua, Technical University of Wrocaw, Poland, for helpful discussion in preparing the paper and Prof. D. Pallaschke, University of Karlsruhe, FRG, for help in preparing the numerical example.     

基于FPGA的多通道雷达数据回放系统设计

为解决雷达实时信号处理功能及性能有效验证问题,文中设计并实现了一种宽窄带一体化、多通道雷达数据回放系统。该系统按雷达工作的时序和数据率将雷达回波数据发送至实时信号处理系统,从而对目标跟踪场景进行复现,实现雷达实时信号处理功能及性能的有效验证。系统硬件平台由磁盘阵列服务器与两块PCIe光纤板组成。基于Xilinx系列产品,结合系统特点对PCIe DMA控制流程及响应机制做进一步调整,实现了服务器到光纤板的雷达回波数据高速批量传输。根据雷达工作机制及回波数据结构,设计FPGA回放控制状态机及相关功能模块,严格按照雷达工作的时序和数据率使雷达回波数据由光纤板传输至实时处理系统。分别设计软件同步控制方法和硬件同步控制方法,保证多板卡数据回放的同步性。测试结果表明,该系统实现了宽、窄带雷达回波数据的板间同步回放,各数据类型分别支持6路并行数据通道,数据回放峰值速率可达1 920 MB·s^-1。文中系统可依托雷达原有硬件平台实现,无需增设板卡和线缆,具有良好的集成性与通用性,目前已被应用于某多功能相控阵雷达中。     

基于故障统一模型的故障检测策略

随着集成电路制造工艺持续向纳米尺度的推进,数字电路受老化、工艺误差、软错误等故障所造成的时序偏差越发突出,严重威胁了电路的“时序安全”。文中通过分析故障影响信号稳定性侵犯模型,提出了一种新的故障检测模型。该模型扩展了现有的故障检测能力,通过使用C单元作为稳定性检测器输出单元,提高了其对高速的适应性。仿真结果显示,与已有结果相比其具有明显的速度优势和较小的硬件开销。