一种单相串联混合电力有源滤波器的研究

文中对串联混合电力滤波器抑制谐波的原理进行了分析。为了检测单项系统的谐波电流,提出一种基于虚拟三相法和瞬时无功理论的谐波检测方法,并且对串联滤波逆变器的直流侧电压的控制进行了讨论。仿真结果证明了其有效性。     

Evaluation of recombinant green fluorescent protein, under various culture conditions and purification with HiTrap hydrophobic interaction chromatography resins

To determine the influence of various culture conditions, transformed cells of Escherichia coli expressing recombinant green fluorescent protein (GFPuv) were grown in nine cultures with four variable conditions (storage of inoculated broth at 4°C prior to incubation, agitation speed, isopropyl-β-d-thiogalactopyranoside [IPTG] concentration, and induction time). The pelleted cells were resuspended in extraction buffer and subjected to the three-phase partitioning (TPP) extraction method. To determine the most appropriate purification resin, protein extracts were eluted through one of four types of HiTrap hydrophobic interaction chromatography (HIC) columns prepacked with methyl, butyl, octyl, or phenyl resins and analyzed further on a 12% sodium dodecylsulfatepolyacrylamidegel. With Coomassie staining, a single band between 27 (standard GFPuv) and 29 kDa (molecular weight standard) was visualized for every HIC column sample. TPP extraction with HIC elution provided about 90% of the GFPuv recovered and eight-fold GFPuv enrichment related to the specific mass. Rotary speed and IPTG concentration showed, respectively, greater negative and positive influences on GFPuv expression at the beginning of the logarithmic phase for the set culture conditions (37°C, 24-h incubation).     

On the three-phase mass transfer with solid particles adhered to the gas-liquid interface

A heterogeneous, multi-layer mass transfer model is proposed for prediction of the effect of multi-layer packing of catalyst particles adhered to the gas-liquid interface. The behavior of the mass transfer rate with respect to the multi-layer packing, to the particle size and mass transfer coefficient without particles is discussed. It is shown that enhancement can be considerably increased by multi-layer packing compared to that of mono-layer packing, depending on the values of particle size and mass transfer coefficient. The predicted mass transfer rates using the proposed model was verified with experimental data taken from the literature. The model presented should be superior to that of published in the literature.     

Some selected problems of nonaqueous microemulsions — phase diagrams and variation of the composition in the quaternary and ternary systems

A variety of quaternary and ternary systems of the type of dodecane/aliphatic alcohols/Na-dodecyl sulphate/water or a water-replacing component (formamide, ethylene glycol, propylene glycol, propylene carbonate, dimethylsulfoxide, acetonitrile) were subjected to a comparative analysis of microemulsification. The compositions of the systems of the type of oil/surfactant/cosurfactant/water or nonaqueous liquid were changed with respect to surfactant (Na-dodecyl sulfate and triton X 114) concentration, cosurfactant (homologous aliphatic alcohols) concentration and mixing ratio of water and water-replacing component. The appertaining phase diagrams were plotted and compared with those of aqueous systems.The experimental results suggest that the phase regions, which are designated as nonaqueous microemulsions, probably represent, not only microemulsions in the usual sense, but a separate kind of mixed phase whose microstructure is examined by special studies. Analogously to aqueous microemulsion systems, transparency and spontaneous formation of homogeneous multicomponent systems cannot serve as the sole criteria for waterless microemulsion formation. But they are important guiding properties of microemulsion formation in multicomponent systems.The variety of components involved in the chemical composition and the current insufficient knowledge do not permit to generally decide whether nonaqueous systems can be assigned to microemulsions or to molecular solutions. For clarifying this problem a detailed examination of the miscibility behavior, especially that of binary systems as a function of temperature, and the role that surfactant and cosurfactant play in the formation of homogeneous systems will be necessary.     

Thermodynamic behavior of adsorption systems with porous adsorbents along the curves describing equilibrium between bulk phases of an adsorptive

The thermodynamic aspects of adsorption equilibrium in systems with crystalline, liquid, and dense gas phases have been considered. The heats of phase transition and corresponding directions of mass transfer from the adsorbed phase into crystalline and liquid phases at different temperatures have been determined. The general equilibrium diagram in the coordinates Inp-T ^–1 has been given with indication of the equilibrium lines of three-phase systems and characteristic points on the isosteres of adsorption,viz., the Gurvitsch and quasicritical points.Deceased.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1480–1485, August, 1995.     

基于ATmega128A的三相正弦波发生器的研究与设计

近年来,逆变技术作为一种高效的节能技术已经渗透到各个领域。目前,逆变电源的控制多采用正弦脉宽调制技术（SPWM）,SPWM波大多用高性能的DSP生成。虽然这种技术已经很成熟,但多数DSP的外围电路开发时存在一些难度。此外,DSP的成本仍比单片机要高出不少。本文设计了一种基于ATmega128A的可用于回馈控制系统的三相正弦波发生器,利用软件编程产生 SPWM 波,滤波后得到三相正弦波。其控制电路简单,能够降低外界干扰。通过实验证明,该发生器可以通过软件最终生成三相正弦波,并实现过零点匹配和相位匹配控制,具有良好的实时性和快速性。     

基于PIC24F的柴油发电机检测与自动化系统

针对原有柴油发电机组的专用控制器功能单一、集成度低、测量精度和响应速度低等问题,设计了一款基于PIC24F的柴油发电机检测与自动化系统。在该系统控制作用下,可实现市电故障检测以及无人值守条件下的自动运行。通过实验证明,文中所使用的差动式低通放大电路作为前置电压采样电路和软件补偿算法,可较好地抑制共模干扰信号,高频干扰信号,冲击噪声,提高了测量的准确性与可靠性。与以往的双电源供电和外置AD做法相比,文中所采用的单电源加偏置电压的信号采集电路成本降低,外围器件减少,且缩小了电路体积。     

The study of the stability of aqueous three-phase fire-resistant foam in typical liquidus hydrocarbons

The utilization of solid particles in aqueous foam has a great potential in improving fire fighting efficiency. In this study, aqueous foam supported by micro fly-ash (FA) was prepared and its stability in a specific type of oil was characterized. Firstly, different amount of FA was added to study the influence of FA concentration on foamability. It showed that within a specific extent, foam expansion ratio increased with the increasing of FA concentration. And compared with conventional foams, oil resistance of FA stabilized foams, which was investigated by analyzing drainage rate and evolution process with a self-made apparatus, was remarkably improved when FA concentration exceed 4.8wt.%. Secondly, SiO₂ and Al₂O₃ particles with different median sizes were used to study the effect of particle size on stability. However, the smaller hydrophilic particles didn’t behave better as expected. Moreover, the foam stability in three hydrocarbons was evaluated in the same way. The results indicated that the short chain hydrocarbons had much stronger detrimental effect to both two-phase foam and three-phase foam. But overall, the three-phase foam stabilized by FA exhibited much better oil resistance, so it can be used as a promising material for pool fire extinguishing and prevention.GRAPHICAL ABSTRACT     

Laguncularia racemosa Phenolics Profiling by Three-Phase Solvent System Step-Gradient Using High-Performance Countercurrent Chromatography with Off-Line Electrospray Mass-Spectrometry Detection

The detailed metabolite profiling of Laguncularia racemosa was accomplished by high-performance countercurrent chromatography (HPCCC) using the three-phase system n-hexane–tert-butyl methyl ether–acetonitrile–water 2:3:3:2 (v/v/v/v) in step-gradient elution mode. The gradient elution was adjusted to the chemical complexity of the L. racemosa ethyl acetate partition and strongly improved the polarity range of chromatography. The three-phase solvent system was chosen for the gradient to avoid equilibrium problems when changing mobile phase compositions encountered between the gradient steps. The tentative recognition of metabolites including the identification of novel ones was possible due to the off-line injection of fractions to electrospray ionization mass spectrometry (ESI-MS/MS) in the sequence of recovery. The off-line hyphenation profiling experiment of HPCCC and ESI-MS projected the preparative elution by selected single ion traces in the negative ionization mode. Co-elution effects were monitored and MS/MS fragmentation data of more than 100 substances were used for structural characterization and identification. The metabolite profile in the L. racemosa extract comprised flavonoids, hydrolysable tannins, condensed tannins and low molecular weight polyphenols.     

A control volume finite element method for three-dimensional three-phase flows

A novel control volume finite element method with adaptive anisotropic unstructured meshes is presented for three-dimensional three-phase flows with interfacial tension. The numerical framework consists of a mixed control volume and finite element formulation with a new P₁DG-P₂ elements (linear discontinuous velocity between elements and quadratic continuous pressure between elements). A “volume of fluid” type method is used for the interface capturing, which is based on compressive control volume advection and second-order finite element methods. A force-balanced continuum surface force model is employed for the interfacial tension on unstructured meshes. The interfacial tension coefficient decomposition method is also used to deal with interfacial tension pairings between different phases. Numerical examples of benchmark tests and the dynamics of three-dimensional three-phase rising bubble, and droplet impact are presented. The results are compared with the analytical solutions and previously published experimental data, demonstrating the capability of the present method.