新型蓝绿发光材料ZnSe／BeTe超晶格的能带剪裁

由于器件的快速退化，101.5小时似乎成了Znse基蓝绿色半导体激光器难于逾越的寿命极限。分析退化机制，发现在强电流注入的半导体激光器中，热退化具有重要影响。研究表明，用作载流子限制层的宽带Ⅱ-Ⅵ族四元合金（如ZnMgSSe）只能对ZnSe中的电子有效地限制，无法对空穴很好地限制;而对BeTe，却只能对空穴进行有效的限制，无法对电子很好地限制。这导致ZnSe（或BeTe）活性层空穴（或电子）漏电发热，引起退化。本文提出以ZnSe／BeTe超晶格为蓝绿发光层，并用包络函数理论具体计算了阱宽、垒宽对载流子能级的不同影响，考察了ZnSe、BeTe厚度比和超晶格周期对带隙、载流子限制能力的调节。为研制新型长寿命蓝绿色半导体激光器提供了一条新的途径。     

Electron-confined LO-phonon scattering in GaAs-Al0.45Ga0.55As superlattice

We develop a theoretical model to the scattering time due to the electron-confined LO-phonon in GaAs-Al_xGa_1-xAs superlattice taking into account the sub-band parabolicity. Using the new analytic wave function of electron miniband conduction of superlattice and a reformulation slab model for the confined LO-phonon modes, an expression for the electron-confined LO-phonon scattering time is obtained. In solving numerically a partial differential equation for the phonon generation rate, our results show that forx = 0.45, the LO-phonon in superlattice changes from a bulk-like propagating mode to a confined mode. The dispersion of the relaxation time due to the emission of confined LO-phonons depends strongly on the total energy.     

Tilted superlattice composition profile determined by photoluminescence and thermal disordering

The composition profile of an (AlAs)_1/2(GaAs)_1/2 tilted superlattice is characterized for the first time. The tilted superlattice sample is thermally disordered, and the energy of the direct band gap photoluminescence peak is measured as a function of increasing layer interdiffusion. The shift in the photoluminescence peak energy after completely disordering the tilted superlattice is 39 meV. A theoretical model is used to simulate the change in band gap as a function of layer interdiffusion for several composition profiles. The profile that gives the best fit to the experimental data is chosen. The tilted superlattice composition profile is found to be sinusoidal, varying from Al_0.40Ga_0.60As to Al_0.60Ga_0.40As.     

DX centers in AlxGa1-xAs bulk alloy,AlAs/GaAs ordered,and disordered superlattices

Properties of theDX centers in Al_0.5Ga_0.5As bulk alloy (b-AL), (AlAs)₂ (GaSa)₂ ordered superlattice (o-SL) and (AlAs) _m (GaAs) _n disordered superlattice (d-SL) (m = 1, 2, 3,n = 1, 2, 3) with the same macroscopic composition were measured and compared. By deconvolution of deep level transient spectroscopy (DLTS) spectrum due to theDX center, we have found a decrease in the number of separate peaks in DLTS spectrum in an intentionally atomic ordered arrangement. Visiting Scholar of the Japan Society for the Promotion of Science. On leave from Department of Electrical Engineering, San Jose State University, San Jose, California 95192-0084, USA.     

InAs/GaSb superlattice focal plane arrays for high-resolution thermal imaging

The first fully operational mid-IR (3–5 μm) 256×256 IR-FPA camera system based on a type-II InAs/GaSb short-period superlattice showing an excellent noise equivalent temperature difference below 10 mK and a very uniform performance has been realized. We report on the development and fabrication of the detecor chip, i.e., epitaxy, processing technology and electro-optical characterization of fully integrated InAs/GaSb superlattice focal plane arrays. While the superlattice design employed for the first demonstrator camera yielded a quantum efficiency around 30%, a superlattice structure grown with a thicker active layer and an optimized V/III BEP ratio during growth of the InAs layers exhibits a significant increase in quantum efficiency. Quantitative responsivity measurements reveal a quantum efficiency of about 60% for InAs/GaSb superlattice focal plane arrays after implementing this design improvement. The paper presented there appears in Infrared Photoelectronics, edited by Antoni Rogalski, Eustace L. Dereniak, Fiodor F. Sizov, Proc. SPIE Vol. 5957, 595707 (2005).     

Molecular dynamics simulation of DNA‐directed assembly of nanoparticle superlattices using patterned templates

DNA‐directed assembly is a well developed approach in constructing desired nano‐architectures. On the other hand, E‐beam lithography is widely utilized for high resolution nano‐scale patterning. Recently, a new technique combining these two methods was developed to epitaxially grow DNA‐mediated nanoparticle superlattices on patterned substrates. However, defects are observed in epitaxial layers which restricts this technique from building large‐scale superlattices for real applications. Here we use molecular dynamics simulations to study and predict defect formation on adsorbed superlattice monolayers. We demonstrate that this epitaxial growth is energetically driven by maximizing DNA hybridization between the epitaxial layer and the substrate and that the shape anisotropy of the DNA‐mediated template posts leads to structural defects. We also develop design rules to dramatically reduce defects on epitaxial layers. Ultimately, with the assist of the computational study, this technique will open the door to constructing well‐ordered, three‐dimensional novel nanomaterials. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 1687–1692     

Spin Polarization and Spin‐Flip Through Phosphorene Superlattice

The spin‐dependent transport properties, including spin polarization and spin‐flip for phosphorene superlattice in the presence of an extrinsic Rashba spin‐orbit interaction (RSOI) based on the transfer matrix method, are studied. The results show that the number of barriers in the superlattice structure plays a dominant role in output spin polarization, which can be used in designing optimized spintronic devices. In addition, by controlling on the Rashba strength, an incident spin‐up electron can be transmitted as a spin‐down electron. Also, it enables to convert the unpolarized incident electronic beam (with zero spin polarization) into an arbitrary output spin polarization, which plays a significant role in qubit circuits.     

混合激励与应变超晶格系统沟道运动的临界特征

从势和场的观点出发讨论了带电粒子在应变超晶格中的运动行为.在经典力学框架内和偶极近似下,引入正弦平方势,把粒子运动方程化为具有阻尼项和混合激励项的广义摆方程.利用Melnikov方法讨论了系统的临界性质与混沌行为.结果表明,系统的混沌行为与它的参数有关,适当调节参数,就可以原则上保证系统的稳定性.     

Highly Ordered Superlattices from Self-assembly of Fe3O4 Nanocrystals

The nano materials often exhibit very interesting electrical, optical, magnetic, and chemical properties, which can not be achieved by their bulk counterparts. The development of uniform nanometer sized particles has been intensively pursued because of their technological and fundamental scientific importance. It is significant that nanostructured materials can be controllably assembled into the required geometry onto substrates, becoming the basis of the next generation of components and devices. The development of new methods and strategies for organizing the nanoparticle basic building blocks into the desired structures is required. Superlattices made from these building blocks give us the opportunity to study not only the properties of the individual building blocks, but also collective effects. The superparamagnetic iron oxide nanocrystals（NCs） have been used in the fields of bio-medicine, ferrofluids, refrigeration system, catalysis,     

正切平方势单量子阱的本征值和本征函数

鉴于“方形”势阱描述量子阱中的电子运动行为过于简单、过于理想,引入了正切平方势来代替,使结果得到了改善。在量子力学框架内,利用正切平方势把电子的Schrdinger方程化为超几何方程,利用系统参数和超几何函数严格地求解了电子的本征值和本征函数,并以Ga_1-xAl_xAs-GaAs-Ga_1-xAl_xAs量子阱为例计算了电子的能级和能级之间的跃迁。结果表明,电子在量子阱中的能量是量子化的,而相邻能级之间的跃迁给出与实验进一步符合的结果。