静电火花法表征塑料导爆管起爆感度探索

提出了塑料导爆管轴向静电火花感度的概念、测试原理。用标准的静电感度测试仪配以一定结构的起爆针 ,建立了可用于导爆管感度测试的实验装置 ,采用升降法测出导爆管起爆所需静电能量并用它来表征导爆管的感度。用三种导爆管进行了感度测试 ,实验条件下其感度值E0 .50 分别为 0 .4 3、1.0 8、1.94J。     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

Metal Micropatterning by Triboelectric Spark Discharge

Metal micropatterns play critical roles in flexible electronics. However, the lack of versatile strategies for micropatterning of diverse metal materials on various thin, flexible or stretchable substrates has limited the rapid development of flexible electronics. Here, a metal micropatterning method by triboelectric spark discharge under atmospheric environment is developed, where a triboelectric nanogenerator (TENG) is employed to precisely and safely control the voltage, current, and frequency of the spark discharges. Micropatterns of metal films like gold, silver, copper, aluminum and platinum are successfully fabricated on substrates of polyimide, polyethylene terephthalate, polyvinyl chloride, polydimethylsiloxane, paper or latex, even on ultrathin substrates (5 μm thick) without damage, where the feature sizes of metal patterns are controllable from 20 μm to 1 mm. Experimental insights into the triboelectric spark discharge behaviors and the pattern feature sizes control are discussed. A straightforward fabrication of metal patterns on the balloon surface or human skin through “handwriting” by a pencil as discharge electrode is realized. Besides metals, extended processibility of conductive materials like carbon nanotubes, graphene, MXene, graphite, carbon fibers, and conductive polymers are also demonstrated. This work proves the possibility of microfabrication by TENG, which is of simplicity and attractiveness for flexible electronics.     

2-乙基己基磷酸单(2-乙基己基)酯萃淋树脂分离-火花源质谱法测定高纯氧化镱中痕量稀土杂质

本文采用萃取色谱法以2-乙基已基膦酸单(2-乙基已基)酯(P_507)萃淋树脂为固定相,以HCI-NH_4CI体系为淋洗液,研究了99.999%~99.9999%的高纯Yb_2O_3中稀土杂质和Yb基体的分离条件,将杂质淋洗液富集于复合螯合剂-活性碳上,经灼烧灰化后制成样品电极,进行质谱测定.测定下限达 0.01~0.05 μg/g,可用于高纯 Yb_2O_3中杂质的测定.回收率在80%以上.     

5-Hydroxytryptamino-induced calcium sparks in cultured rat stomach fundus smooth muscle cells

With the imaging fluorescence probe of Ca2+ (fluo-3) and a laser scanning confocal micro-scope, the spontaneous localized calcium release event was first discovered in resting rat cardiac myocytes by Cheng[1] in 1993. A mathematical simulation is developed with computer in order to reveal the effect, which is immediately suggested that these events are likely to reflect the local-ized release of Ca2+ from a small cluster of ryanodine-sensitive Ca2+ release channels in sar-coplasmic reticulum …     

Fluorination of polymers by sulfur hexafluoride gas under electric discharge

Fluorination of low-density polyethylene, polyacetylene, and poly(vinyl alcohol) was carried out using SF₆ gas under electric discharge. The polymers were partially fluorinated and the extent of fluorination was more in the case of poly (vinyl alcohol) than the other two polymers. The fluorinated polymers were characterized by elemental analysis (Fluorine), IR, and x-ray diffraction. Optical transparency of the films was also measured. The fluorinated polymers show better solvent resistance and decreased transparency than the virgin polymer. © 1994 John Wiley & Sons, Inc.     

衰减振荡电流下火花电阻的光谱诊断

气体开关是脉冲功率系统的关键部件,开关的火花通道阻抗直接影响负载电压的陡度及其能量传输效率。提出一种光谱学诊断方法,通过对火花通道成像光谱的时空分辨测量,获得通道半径及电导率,从而计算时变的火花电阻。光谱测量结果表明,氮气间隙火花放电通道电子温度为2~3eV,通道电导率先增大后减小,最大值约16 000S,随着放电发展,火花通道电阻从绝缘状态快速跌落并趋于稳定值,时变趋势与电学计算结果基本吻合。3~100kPa范围内,随着气压增大,放电通道半径减小,火花通道电阻增大。     

Dielectric Properties of Colossal-Dielectric-Constant Na1/2La1/2Cu3Ti4O12 Ceramics Prepared by Spark Plasma Sintering

In the current study, we report on the dielectric behavior of colossal-dielectric-constant Na_1/2La_1/2Cu₃Ti₄O₁₂ (NLCTO) ceramics prepared by mechanochemical synthesis and spark plasma sintering (SPS) at 850 °C, 900 °C, and 925 °C for 10 min. X-ray powder diffraction analysis showed that all the ceramics have a cubic phase. Scanning electron microscope observations revealed an increase in the average grain size from 175 to 300 nm with an increase in the sintering temperature. SPS NLCTO ceramics showed a room-temperature colossal dielectric constant (>10³) and a comparatively high dielectric loss (>0.1) over most of the studied frequency range (1 Hz–40 MHz). Two relaxation peaks were observed in the spectra of the electrical modulus and attributed to the response of grain and grain boundary. According to the Nyquist plots of complex impedance, the SPS NLCTO ceramics have semiconductor grains surrounded by electrically resistive grain boundaries. The colossal dielectric constant of SPS NLCTO ceramics was attributed to the internal barrier layer capacitance (IBLC) effect. The high dielectric loss is thought to be due to the low resistivity of the grain boundary of SPS NLCTO.     

高峰值功率脉冲氟化氢激光器

报道了大体积火花预电离横向放电的脉冲HF激光器。通过采用紧凑的结构安排,在放电体积为4cm×5cm×90cm的SF6和C2H6混合气中获得了均匀稳定的放电。在总气压为12.6kPa、最高充电电压45kV时,激光输出脉冲能量为3J,激光脉冲峰值功率约18MW。     

制备工艺对p型碲化铋基合金热电性能的影响

利用区熔法、机械合金化、放电等离子烧结(SPS)技术、热压法等多种工艺制备了p型碲化铋基热电材料.在300—500K的温度范围内测量了各热电性能参数，包括电导率(σ)、塞贝克系数(α)和热导率(κ)，研究了制备工艺对热电性能的影响.结果表明，所制备的块体材料与同组成区熔晶体相比，性能优值ZT均有不同程度的提高.其中，利用区熔法结合SPS技术可获得热电性能最佳的块体材料，其ZT值达1.15. 关键词： 碲化铋 放电等离子烧结 区熔法 热电性能