Σ-ΔA/D转换技术及仿真

Σ－ΔＡ／Ｄ转换技术近年来颇受重视，因为基于该技术的Ａ／Ｄ转换器能达到很高的分辨率（１６ｂｉｔ以上），并另具一系列优点。本文对Σ－ΔＡ／Ｄ转换器的基本原理，包括过采样（Ｏｖｅｒｓａｍｐｌｉｎｇ），噪声成形（ＮｏｉｓｅＳｈａｐｉｎｇ），以及数字抽取滤波（ＤｉｇｉｔａｌＤｅｃｉｍａｔｉｏｎＦｉｌｔｅｒｉｎｇ）等内容，均作了叙述。作者还对一个２０ｂｉｔΣ－Δ转换器的算法进行了计算机仿真。该转换器采用了高阶ＭＡＳＨ噪声成形技术，而其数字抽取滤波部分则由梳状滤波器与级联的半带滤波器构成。文章中给出了仿真结果。     

Picosecond control of coherent magnetisation dynamics in permalloy thin films by picosecond magnetic field pulse shaping

We have measured the response of a 20×10 μm, 8 nm thin NiFe (80:20) permalloy film due to excitation by short in-plane magnetic field pulses. We will show that using a two-pulse-technique a complete control of the precessional motion of the magnetisation can be achieved on picosecond timescales. Furthermore, we will present numerical calculations which show that a complete suppression of magnetisation ringing after switching can only be realised by a cascade of short field pulses.     

强激光的时间整形和空间整形——利用双折射透镜组实现激光束的空间整形

本文使用琼斯矩阵方法对双折射透镜组空间整形系统的光强透射率分布和工作特性进行了分析,并讨论了工程设计中参数的选择以及加工误差带来的影响等有关问题.     

一种降低OFDM信号PAPR的新方法

正交频分复用(OFDM)技术的一个缺点是信号的高峰值平均功率比(PAPR)大大降低了系统中线性功放的效率。本文提出一种新的基于Nyquist脉冲成形的PAPR抑制方法。这种方法基于选择适当的Nyquist脉冲波形集合对OFDM的各个子载波进行脉冲成形。分析论证了该方法的PAPR上限值和所用的脉冲成形波形集合。仿真结果表明该方法能有效降低任意子载波数目的OFDM信号的PAPR值,而且与已有方法相比应用更为简单。因此脉冲成形技术不仅能对传输信号进行频谱成形来提高系统的频带利用率,而且还可以减小信号的PAPR值。     

Broadband spectral shaping in a Ti:sapphire regenerative amplifier

A birefringent crystal quartz plate of known thickness has been used as a spectral filter for spectral shaping in a Ti:sapphire regenerative amplifier. The spectral profile of the amplified pulse ejected from the regenerative amplifier was observed while adjusting the birefringent crystal plate in the cavity. By altering the gain spectrum, the bandwidth of the regeneratively amplified pulse was increased from 18 to 35 nm by using a 0.34-mm thick birefringent plate. The output pulse spectrum from the regenerative amplifier neared the bandwidth of the seed pulse. As a comparison, we used a coated filter outside the regenerative amplifier cavity, and the bandwidth of the regeneratively amplified pulse was stretched to 28 nm. When the bandwidth was stretched to 35 nm, the pulse was compressed to 35 fs.     

激光超塑性成型技术研究

本文探讨了激光超塑成型技术中所涉及的合金板材制备、光能耦合及成型工艺，给出了标样拉伸实验和实际工件成型的结果，并对金相组织进行了分析．     

塑料成型工艺实习CAI课件的开发

针对当前学生实习面临的困难，以Authorware为开发工具，编制了塑料成型工艺实习CAI课件，整个软件图文并茂，图像，动画，解说，音乐相结合，形象地介绍了塑料各种成型工艺的主要原理，生产设备，工艺流程和相关产品，应用本软件学生可以进行模拟实习，该软件激发了学生学习的兴趣，提高了实习质量。     

Electrochemical machining of metals: Fundamentals of electrochemical shaping

Basic problems of metal electrochemical shaping theory are considered. Exact and approxi1mate (quasi-steady-state, locally one-dimensional) methods for solving direct and inverse problems are analyzed. Experimental methods for improving the electrochemical shaping accuracy are considered.Translated from Elektrokhimiya, Vol. 40, No. 12, 2004, pp. 1438–1480.Original Russian Text Copyright © 2004 by Davydov, Volgin, Lyubimov.     

Linear quadratic regulator for laser beam shaping

The performance of an adaptive optics system depends on multiple factors, including the quality of the laser beam before being projected to the mesosphere. In general, cumbersome procedures are required to optimize the laser beam in terms of amplitude and phase. However, aberrations produced by the optics of the laser beam system are still detected during the operations due to, for example, uncertainty in the utilized models. In this paper we propose the use of feedback to overcome the presence of model uncertainty and disturbances. In particular we use a Linear Quadratic Regulator (LQR) for closed loop laser beam shaping using a setup of two deformable mirrors. The proposed method is studied and simulated to provide an automatic optimization of the Amplitude of the laser beam. The performance of the LQR control algorithm is evaluated via numerical simulations using the root mean square error (RMSE). The results show an effective amplitude correction of the laser system aberrations after 20 iterations of the algorithm, a RMSE less than 0.7 was obtained, with about 140 actuators per mirror and a separation of z=3 [m] among the mirrors.     

Generation and Propagation of Optical Superoscillatory Vortex Arrays

Superoscillation is an intriguing wave phenomenon which enables subwavelength features propagating into far field and hence has potential applications in super‐resolution microscopy as well as particle trapping and manipulation. While previous demonstrations mostly concentrate on designing complicated nanostructures for generating uncontrollable superoscillatory functions, here a new technique which allows for creating polynomially shaped superoscillatory functions that contain phase singularity arrays is demonstrated both theoretically and experimentally. Such a technique is implemented in optical experiments for the first time and controllable superoscillatory lobes with feature much below the diffraction limit is achieved. More importantly, a general theoretical framework, which, to our knowledge, has not been reported before, is developed to show how the created superoscillations propagate to a distance of many Rayleigh ranges and eventually disappear when the distance is sufficiently larger. The validity of the model is confirmed by the experiments. The results may trigger further studies in light field shaping and manipulations in subwavelength scale.