3D-TOFSIMS characterization of black spots in polymer light emitting diodes

The occurrence and formation of black spots areas in PolyLED devices has been studied by time-of-flight SIMS (TOFSIMS). The composition, shape and position of the black spots is visualised by three-dimensional (3D)-TOFSIMS depth-profiling. It has been established that the formation of non-emissive spots is due to the growth of aluminium oxide clusters at the AlBa/polymer interface. Electron injection in the black spots is lost by the resulting local increase of the resistivity of the cathode.     

采用热处理方法提高MEH-PPV单层聚合物有机发光二极管发光性能的研究

对以MEH－PPV为发光层的单层聚合物有机发光二极管（OLED）器件在最佳条件下进行真空热处理，并用金相显微镜观察施加电压后器件的阴极表面形貌。发现处理后的器件阴极表面的气泡及黑斑明显减少。器件的发光性能显著提高。与未经处理的器件相比，最大相对发光强度提高了一个数量级、启亮电压降低了2．0V，半寿命提高了12．7倍。初步分析表明热处理方法提高器件发光性能的主要原因在于有效地减少了器件在工作过程中由于焦耳热产生的某些气体，从而减少阴极表面气泡及黑斑的出现，另一方面，热处理方法也增强了有机发光层与阴极接触界面的结合力，提高电子注入水平。     

改进型迈克耳孙干涉仪

采用分光梭镜代替迈克耳孙干涉仪中的分束镜和补偿板，不仅消除了杂散光斑，且简化了仪器的结构．     

面阵探测器的像点亚像素定位研究

面阵探测器可直接探测点目标图像的位置，但其定位精度受到探测器分辨率的限制。因此，亚像元精度技术得到了发展。它是利用目标像点的灰度分布特性，通过内插细分算法，确定出像点位置。可将定位精度提高1—2个数量级。本文介绍了几种实现目标像点亚像素定位的内插细分算法。对它们的计算公式、特点进行了分析，并进行了实验验证。     

Multiple polypeptide forms observed in two-dimensional gels of Methylococcus capsulatus (Bath) polypeptides are generated during the separation procedure

We have examined two-dimensional electrophoresis (2-DE) gel maps of polypeptides from the Gram-negative bacterium Methylococcus capsulatus (Bath) and found the same widespread trains of spots as often reported in 2-DE gels of polypeptides of other Gram-negative bacteria. Some of the trains of polypeptides, both from the outer membrane and soluble protein fraction, were shown to be generated during the separation procedure of 2-DE, and not by covalent post-translational modifications. The trains were found to be regenerated when rerunning individual polypeptide spots. The polypeptides analysed giving this type of trains were all found to be classified as stable polypeptides according to the instability index of Guruprasad et al. (Protein Eng. 1990, 4, 155-161). The phenomenon most likely reflects conformational equilibria of polypeptides arising from the experimental conditions used, and is a clear drawback of the standard 2-DE procedure, making the gel picture unnecessarily complex to analyse.     

One site fits both: A model for the ternary complex of folate + NADPH in R67 dihydrofolate reductase, a D2 symmetric enzyme

R67 dihydrofolate reductase (DHFR) is a novel enzyme that confers resistance to the antibiotic trimethoprim. The crystal structure of R67 DHFR displays a toroidal structure with a central active-site pore. This homotetrameric protein exhibits 222 symmetry, with only a few residues from each chain contributing to the active site, so related sites must be used to bind both substrate (dihydrofolate) and cofactor (NADPH) in the productive R67 DHFR?NADPH?dihydrofolate complex. Whereas the site of folate binding has been partially resolved crystallographically, an interesting question remains: how can the highly symmetrical active site also bind and orient NADPH for catalysis? To model this ternary complex, we employed DOCK and SLIDE, two methods for docking flexible ligands into proteins using quite different algorithms. The bound pteridine ring of folate (Fol I) from the crystal structure of R67 DHFR was used as the basis for docking the nicotinamide-ribose-P_i (NMN) moiety of NADPH. NMN was positioned by both DOCK and SLIDE on the opposite side of the pore from Fol I, where it interacts with Fol I at the pore's center. Numerous residues serve dual roles in binding. For example, Gln 67 from both the B and D subunits has several contacts with the pteridine ring, while the same residue from the A and C subunits has several contacts with the nicotinamide ring. The residues involved in dual roles are generally amphipathic, allowing them to make both hydrophobic and hydrophilic contacts with the ligands. The result is a `hot spot' binding surface allowing the same residues to co-optimize the binding of two ligands, and orient them for catalysis.     

基于组播信号的数字电视字幕插播方案

随着数字电视整体转换的推进,电视节目的数字化播出信号源发生了变化,特别是数字前端平台IP组播的应用,字幕插播系统需要重新规划设计。介绍了基于组播信号的数字电视字幕插播系统的内涵、系统结构和工作流程,详细描述各个部分的设备功能和调试配置,整体构成基于组播信号的数字电视字幕插播系统方案。     

Modified silver staining in 2DE improves protein detection even at extremely low sample concentration

The typical concentration of protein loaded varies from 0.13 to 1.40 μg/μL for a classical silver staining method in 2DE gel. Here, we present a simple modified classical silver staining method by modifying the silver impregnation and development reaction steps. This modified method detects the protein spots at extremely low loaded concentrations, ranging from 0.0048 to 0.0480 μg/μL. We recommend this modified silver staining as an excellent method for the limited biological samples used for silver‐stained 2DE analysis. Altogether, the protocol takes close to two days from first dimension separation to second dimension separation, followed by silver staining, scanning, and analysis.     

固定接触界面法向静弹性刚度

基于Hertz接触理论推导了两个微凸体之间互相作用的法向接触静弹性刚度.根据修正后的一个微接触点的平截面积尺寸分布,给出了界面的总法向接触静弹性条件刚度、总条件载荷的解析解.将法向静弹性刚度的解析解嵌入到有限元软件中,获得整机的理论模态.通过实验对解析解进行了定量验证.以机床结合部为研究对象,在理论振型与实验振型一致的...     

中继辅助蜂窝系统中降低盲区呼叫中断率的性能分析

该文介绍了一种盲区环境下在传统蜂窝系统加入中继功能的系统结构,并且描述了在这种环境下系统的解析模型。然后在这个模型的基础上,通过数学解析得到这种中继辅助蜂窝系统的呼叫中断概率。最后通过数值分析和性能比较证明了在盲区环境中,与无中继辅助的传统蜂窝系统相比较,中继辅助蜂窝系统可以获得更低的呼叫中断率。并且分析了节点移动速度、呼叫平均服务时间和节点覆盖半径等系统参数对这两种不同蜂窝系统性能的影响。