Fabrication and characteristics of tapes and test magnets made from Ag-Clad Bi-2223 superconductors

Pb_0.4Bi_1.8Sr₂Ca_2.2Cu₃O_x (Bi-2223) precursor powder was prepared by a solid-state reaction of carbonates and oxides of lead, bismuth, strontium, calcium, and copper, and the powder was then used to fabricate silver-clad tapes by the powder-in-tube technique. Transport critical current density (J_c) values>4×10⁴ A/cm² at 77K and 2×10⁵ A/cm² at 4.2 and 27K have been achieved in short tape samples. Long lengths of tape were tested by winding them into pancake coils. Recently, we fabricated a test magnet by stacking ten pancake coils, each containing three 16m lengths of rolled tape, and tested it at 4.2, 27 and 77K. A maximum generated field of 2.6 T was measured in zero applied field at 4.2K and the test magnet generated significant self-field in background fields up to 20 T. The results are discussed in this paper.     

HPLC post column derivatization of aromatic amines usingN-methyl-9-chloroacridinium triflate

An HPLC post column chemical derivatization procedure based on the interaction between an acridinium triflate and amines to form highly colored derivatives on-line is described for the determination of aromatic amines. Benzocaine and butesin, local anesthetic agents that contain the aromatic amine group, were used as model compounds. Reversed-phase HPLC conditions were developed for both the separation of analytes and the reaction between analytes and the acridinium triflate in the system. Three-dimensional knitted teflon shape coils and the internal diameter and length of the coils were important parameters in reducing band broadening and background noise.N-Methyl-9-chloroacridinium triflate was shown to be applicable to the determination of primary aromatic amines, selected secondary aromatic amines, hydrazides, and hydrazines. Application of the on-line chemical derivatization procedure to the analysis of pharmaceutical dosage forms containing procainamide (primary aromatic amine), isoniazid (hydrazide), and hydralazine (hydrazine) is also described.     

Double Pancake Versus Long Chalcogen–Chalcogen Bonds in Six‐Membered C,N,S‐Heterocycles

The double “pancake” bonding in the dimers of the six‐membered heterocycles 1,3‐dithia‐2,4,6‐triazine ( 4 ) and 1,3‐dithia‐2,4‐diazine ( 16 ) were investigated by means of high‐level quantum chemical calculations (B3LYP and CCSD(T)). It was found that the S–S dimers, 20 a and 27 , are not the most stable isomers, but the dimers showing short S?N ( 21 a ) and S?C ( 25 , 28 ) bonds. An investigation of the 5‐phenyl‐1,3‐dithia‐2,4,6‐triazine ( 4 b ) yields that the syn dimer with two S?S bonds (2.57 Å) is the most stable one. In this dimer, the phenyl groups are placed on top of each other. The additional dispersion energy of the phenyl rings causes a stabilization of the syn‐S–S (C_2v‐like) isomer. As a result, two weak albeit relevant single S?S bonds (2.57 Å) are predicted. These findings contradict the recently published concept of double “pancake” bonding in the dimer 4 b ₂.     

高温超导体中磁通涡旋薄饼运动的实验证明

为了验证高温超导体中涡旋薄饼运动的存在,我们设计了电流和电位引线分处样品不同表面的实验。实验结果表明,在这种电流电位引线配置下的E～j关系不同于刚性涡旋线运动所预期的E～j关系,由此支持了涡旋薄饼运动的存在。     

托卡马克真空室内线圈水冷管道接头强化二次流的数值研究

基于计算流体力学(CFD)理论,研究了不同曲率半径的螺旋导流片的托卡马克真空室内线圈水冷管道接头。利用湍流数值模拟方法,分析了线圈管道接头导流片曲率半径比、冷却水入口流速对线圈管道内流体平均雷诺数分布的影响。结果表明,不同导流片曲率半径比的线圈管道内的流体雷诺数分布曲线相似,平均雷诺数随入口流速的增加而增大,管道接头出口雷诺数随导流片曲率半径比的增大而减小,导流片曲率半径比小的管接头更适用于线圈水冷曲线管的二次流强化。此外,还为导流片曲率半径比为0.2的管接头拟合了管接头出口雷诺数与入口流速的关系式,为进一步研究类似于托卡马克真空室内线圈管道的曲线管接头的二次流强化提供理论基础。     

多元检测线圈在石油拼接套管的远场涡流检测中的应用

在基于远场涡流的拼接套管检测中,拼接套管各管道分析的复杂性会因为远场涡流两次穿透套管壁的特性而增加.当发射线圈处于缺陷位置时,作者已提出基于双接收线圈的伪峰移除方法.当发射线圈处于正常管道位置时,伪峰移除方法并不能移除检测信号中发射线圈处管道的信息,所以本文提出弥补该不足点的方法.该方法首先通过去伪峰方法将检测信号中发射线圈附近的管道情况统一转化为无缺陷的情况;然后,采用维纳去卷积滤波器获取拼接套管上缺陷（接箍可视为缺陷）的位置信息,并根据缺陷位置反向定位拼接套管正常位置.最后,统一移除检测信号中发射线圈处管道的信息.该方法通过仪器测试科索#1井得到验证,有利于提高远场涡流在拼接套管检测分析中的实用性.     

高温超导YBCO线圈交流损耗的频率特性

YBCO线圈的交流损耗直接关系到YBCO设备的运行成本及稳定性。实现对YBCO线圈交流损耗的快速、准确测量,对于开展YBCO涂层导体的应用研究具有重要的意义。文中采用电测量法,在77K、零场和不同频率条件下,对YBCO线圈通以不同运行电流时产生的交流传输损耗进行测量。构建了YBCO线圈交流损耗的数值计算模型,对YBCO线圈交流损耗进行理论研究,最后将实验数据与理论计算结果进行比较,两者结果基本一致。可以发现,YBCO线圈在频率低于75Hz时,交流传输损耗随频率的增大而减小,当频率从75Hz增加到195Hz时,交流传输损耗随频率的增大而增加。     

亥姆霍兹线圈磁场的均匀性分析

引入磁场均匀度的概念，对亥姆霍兹线圈磁场的均匀性进行了定量分析，并通过计算机模拟，得出了同一精度下，形成亥姆霍兹线圈均匀磁场的最佳条件．     

光纤环绕制的实现技术

光纤陀螺的应用对光纤环的绕制提出了更高的要求，为满足工程化的需求，本文就光纤环四级绕法的实现技术和方法进行了研究。     

电子成像均匀约束磁场的产生及测试分析

为增加离子与原子碰撞成像系统中探测电子的立体角，设计了一约束电子的复合型亥姆霍兹线圈装置.对复合型亥姆霍兹线圈的磁场分布进行了理论计算和分析，并对制作的复合型亥姆赫兹线圈产生的磁场进行了实验测量，得出磁场的均匀性好于±0.6%. 关键词： 亥姆霍兹线圈 磁场分布 磁场均匀性