基于关键路径延时检测的自适应电压缩减技术

为了减小传统的最差情况设计方法引入的电压裕量,提出了一种变化可知的自适应电压缩减(AVS)技术,通过调整电源电压来降低电路功耗.自适应电压缩减技术基于检测关键路径的延时变化,基于此设计了一款预错误原位延时检测电路,可以检测关键路径延时并输出预错误信号,进而控制单元可根据反馈回的预错误信号的个数调整系统电压.本芯片采用SMIC180 nm工艺设计验证,仿真分析表明,采用自适应电压缩减技术后,4个目标验证电路分别节省功耗12.4％,11.3％,10.4％和11.6％.     

Decay rate for viscoelastic wave equation of variable coefficients with delay and dynamic boundary conditions

In this paper, we consider a viscoelastic wave equation of variable coefficients in the presence of past history with nonlinear damping and delay in the internal feedback and dynamic boundary conditions. Under suitable assumptions, we establish an explicit and general decay rate result without imposing restrictive assumption on the behavior of the relaxation function at infinity by Riemannian geometry method and Lyapunov functional method.     

Multiple Scan Chain Design for Two-Pattern Testing

Non-standard fault models often require the application of two-pattern testing. A fully-automated approach for generating a multiple scan chain-based architecture is presented so that two-pattern test sets generated for the combinational core can be applied to the sequential circuit. Test time and area overhead constraints are considered.     

Analysis of Distributed DDQ for QoS Router

In a packet switching network, congestion is unavoidable and affects the quality of real‐time traffic with such problems as delay and packet loss. Packet fair queuing (PFQ) algorithms are well‐known solutions for quality‐of‐service (QoS) guarantee by packet scheduling. Our approach is different from previous algorithms in that it uses hardware time achieved by sampling a counter triggered by a periodic clock signal. This clock signal can be provided to all the modules of a routing system to get synchronization. In this architecture, a variant of the PFQ algorithm, called digitized delay queuing (DDQ), can be distributed on many line interface modules. We derive the delay bounds in a single processor system and in a distributed architecture. The definition of traffic contribution improves the simplicity of the mathematical models. The effect of different time between modules in a distributed architecture is the key idea for understanding the delay behavior of a routing system. The number of bins required for the DDQ algorithm is also derived to make the system configuration clear. The analytical models developed in this paper form the basis of improvement and application to a combined input and output queuing (CIOQ) router architecture for a higher speed QoS network.     

基于网络处理器的RPR综合业务接入平台的设计

弹性分组环(RPR)是一种新的城域网技术,文章提出了用网络处理器IXP1 200构建RPR综合业务接入平台的设计方案,并重点讲述了其中微引擎部分的软件设计.     

基于光纤环的光缓存器

提出了一种基于光纤环的光缓存器的结构,对结合半导体光放大器作光开关的此结构的物理模型进行了详细描述,并根据此模型分析了其增益、噪声、信噪比等方面的特性.     

A Multilayer Optical Packet Switching Network Based on the Kautz Graph and Optical Passive Star Couplers

The multihop optical network is the most appropriate solution to satisfy the increasing applications of Internet services. This paper extends the regular Kautz graph to one with multiple layers in order to produce more architectural variations. The connectivity between adjacent layers utilizes the systematic connection patterns of a regular Kautz graph. A routing algorithm based on its property is presented. Optical passive star (OPS) couplers are adopted to implement our new topologies. Three scheduling criteria that can solve the contention problem in the intermediate nodes are evaluated and compared in terms of their capability to improve the accessibility.     

WPAN/WLAN应用环境下基于PER的链路自适应算法

本文重点研究基于包错误率测量的链路自适应算法，分析了包错误率与信道参数的关系，提出了一种有别于固定门限值方案的优化门限值方案。仿真结果表明，优化门限值方案的网络吞吐量要大于固定门限值方案和基于信干比估计的链路自适应算法，最大增幅可达12Mbit/s。在系统引入重传机制后，网络吞吐量将有所损失，但最大不超过1Mbit/s，相比较服务质量的提高是值得的。需指出的是，虽然分析和仿真均以HIPERLAN／2为例，但不失一般性，它们同样适合于WPAN/WLAN等类似系统。     

DMT系统中一种易于实现的时域均衡器

总结了DMT系统中时域均衡器(TEQ)的主要设计方法，指出最大缩短信噪比(MSSNR)TEQ的最优设计方法很难实时实现。提出了一种MSSNR TEQ的次优设计方法，它首先估计出目标抽样窗的最优延迟，然后用分步求解法求出TEQ的抽头系数。和最优方法相比，次优方法的计算量大幅度减少，可实时实现，而其缩短信噪比的损失很小。仿真实验验证了次优方法的有效性。     

SAW软扩频调制解调器的研究

报道了一种直接序列软扩频调制解调器的SAW实现方案，并给出了相应的实验结果。该方案对提高系统抗干扰能力、频宽利用等方面均具有与其他技术不同的特点。同时，该技术方案为进一步研究DS-OFDM打下了基础。