宽工作电压范围单电源CMOS误差放大器

采用0.8μm标准数字CMOS工艺(VTN0=0.836V,VTP0=0.930V),设计并流片验证了具有宽工作电压范围(3～6V),可作SOC系统动态电源管理芯片内部误差放大器应用的单电源CMOS运算放大器。该误差放大器芯核同时具有适合低电压工作,并对工艺参数变化不敏感的优点。对于相同的负载情况,在3V的工作电压下,开环电压增益AD=83.1dB,单位增益带宽GB=2.4MHz,相位裕量Φ=85.2°,电源抑制比PSRR=154.0dB,转换速率Sr=2.2V/μs;在6V工作电压下,AD=85.1dB,GB=2.4MHz,Φ=85.4°,PSRR=145.3dB,Sr=3.4V/μs。     

铜蒸气激光器种子注入光腔的参数计算

用矩阵光学理论计算了由主振荡器和功率放大器组成的种子注入光腔。主振荡器光腔是由曲率半径R1=-250mm,R2=5000mm,相距L=2375mm的球面镜组成的正支非稳腔;功率非稳腔是由曲率半径R3=400mm,R4=5600mm,相距S=3000mm的球面镜构成的负支非稳腔。理论计算表明,该种子注入光腔可输出光束发散角约几十微弧的激光,可满足铜蒸气激光器主振荡器功率放大器(MOPA)的技术要求。     

配送量不定的供应链协调

本文研究供应链管理中配送量不确定时，制造商和分销商之间的协调问题。通过建立惩罚和奖励机制模型来协调供应链各部分的运作，使得分散系统就如一个整体。同时分析供应链的利润分配问题，分别得出各个机制下分销商的最优决策。     

Stability Properties of Feynman's Operational Calculus for Exponential Functions of Noncommuting Operators

Stability properties of Feynman's operational calculus are addressed in the setting of exponential functions of noncommuting operators. Applications of some of the stability results are presented. In particular, the time-dependent perturbation theory of nonrelativistic quantum mechanics is presented in the setting of the operational calculus and application of the stability results of this paper to the perturbation theory are discussed.     

连续工作型电子装备战备完好性预计

从战略完好性的实际内涵出发，考虑到装备实际工作中可能处于不同的工作状态，因而其战略完好性模型也应有所有同。对于处于连续工作状态的电子装备，即使工作中发生故障，只要执行下次任务前能修好，就不影响装备的战略完好性。基于此，得出了电子装备处于连续工作状态下的战略完好性预计模型，并在对应的条件下对此模型的得出进行了缜密的推理。     

Calibrating software reliability models when the test environment does not match the user environment

Software failures have become the major factor that brings the system down or causes a degradation in the quality of service. For many applications, estimating the software failure rate from a user's perspective helps the development team evaluate the reliability of the software and determine the release time properly. Traditionally, software reliability growth models are applied to system test data with the hope of estimating the software failure rate in the field. Given the aggressive nature by which the software is exercised during system test, as well as unavoidable differences between the test environment and the field environment, the resulting estimate of the failure rate will not typically reflect the user‐perceived failure rate in the field. The goal of this work is to quantify the mismatch between the system test environment and the field environment. A calibration factor is proposed to map the failure rate estimated from the system test data to the failure rate that will be observed in the field. Non‐homogeneous Poisson process models are utilized to estimate the software failure rate in both the system test phase and the field. For projects that have only system test data, use of the calibration factor provides an estimate of the field failure rate that would otherwise be unavailable. For projects that have both system test data and previous field data, the calibration factor can be explicitly evaluated and used to estimate the field failure rate of future releases as their system test data becomes available. Copyright © 2002 John Wiley & Sons, Ltd.     

有界变量线性规划的基线算法

本文对有界变量线性规划的算法进行了研究，得到了一种解此问题的新算法。文中根据基线算法的算法原理，通过对BL表的旋转，在各变量满足界约束的条件下，使目标函数值不断增大，直至得到有界硬上界，从而得到问题的最优解。文中给出了有界变量线性规划基线算法的计算步骤，并给出了一个例子。与单纯形法相比，采用基线算法解有界变量线性规划操作更简单。迭代次数少，解题速度更快。     

一种前馈型全摆幅恒跨导准恒增益CMOS运放设计

设计了一种适合在低电源电压下工作的前馈型输入级放大结构，在全摆幅的动态工作范围内，输入级跨导保持不变，采用负载电流补偿以保证增益近似恒定，输出采用前馈型AB类输结构，实现全摆幅输出。     

求线性规划初始可行基的新方法

本文提出一个求线性规划初始可行基的新算法，该算法不仅避免了人工变量，而且理论分析及初步的数值实验结果表明其效率更高。     

组合DEA方法与成熟度模型对项目效益的评价

为全面考虑资金、管理决策能力等因素对项目效益的影响，本运用数据包络分析与项目成熟度模型结合的方法来对企业各个项目之间的相对效益进行评价，应用结果表明该评价方法对于企业资源的最优配置、提高总体效益是十分有用的。