利用KTP晶体实现1.08μmNd：YAP激光器锁模

本文描述了利用ＫＴＰ晶体和腔的基波输出镜构成非线性镜实现１．０８μｍＮｄ：ＹＡＰ激光器的被动锁模。实验表明，这种新的锁模技术比用染料作可饱和吸收体的被动锁模技术有很多突出的优点，具有很大的发展潜力。实验测得锁模时基波１．０８μｍ输出２．４ｍＪ，二次谐波０．５４μｍ输出０．５ｍＪ（同样条件下的静态输出为２．５ｍＪ），基波脉冲的平均脉宽为４０ｐｓ。     

40 GHz Mode-Locked Semiconductor Lasers: Theory, Simulations and Experiment

We study both theoretically and experimentally typical operation regimes of 40 GHz monolithic mode-locked lasers. The underlying Traveling Wave Equation model reveals quantitative agreement for characteristics of the fundamental mode-locking as pulse width and repetition frequency tuning, as well as qualitative agreement with the experiments for other dynamic regimes. Especially the appearance of stable harmonic mode-locking at 80 GHz has been predicted theoretically and confirmed by measurements. Furthermore, we derive and apply a simplified Delay-Differential-Equation model which guides us to a qualitative analysis of bifurcations responsible for the appearance and the breakup of different mode-locking regimes. Higher harmonics of mode-locking are predicted by this model as well.     

半导体激光泵浦预激光锁模调Q固体激光器研究

报道半导体激光侧面泵浦预激光锁模调Ｑ的Ｎｄ：ＹＡＧ固体板条激光器，预激光锁模调Ｑ的激光脉冲宽度为３６ｐｓ，调Ｑ包纤各心的锁模单脉冲能量超过７μＪ，相应的峰值功率达２００ｋＷ。     

The Application of Mode-Locked Laser Technologies to Long Distance Transmission and Control of Soliton

The control scheme of long distance optical transmission is treated based on conception of mode-locked Laser cavity in this paper. The general mode-locking equation of fiber ring soliton Laser is first constructed, then we give the general perturbed nonlinear schrödinger equation, and finally the transmission and control equations of optical soliton communication systems with various different configurations, respectively, are obtained.     

半导体可饱和吸收镜实现高频脉冲激光研究进展

介绍了作为固体激光器、半导体激光器和光纤激光器被动锁模吸收体的半导体可饱和吸收镜(SESAM)的基本原理和制作方法。详细阐述了利用半导体可饱和吸收镜对同体激光器和光泵垂直外腔面发射半导体激光器进行被动锁模，获得重复率为几吉赫到几百吉赫的超短脉冲激光的方法。     

准连续主动锁模调QNd:YLF振荡器

顺利建成了用于磷酸盐钕玻璃激光核聚变系统的准连续主动锁模调Q Nd:YLF振荡器。报道了其稳定性、可靠性和高信噪比的特性。     

高信噪比多波长2 μm主动锁模光纤激光器

介绍一种多波长掺铥主动锁模光纤激光器,增益介质为长2 m的掺铥光纤,主动锁模通过铌酸锂强度调制器实现。腔内加入基于双折射的光学滤波器,利用保偏光纤双折射滤波效应在滤除腔内多余超模噪声的同时,还可以实现多波长输出。基频下的锁模脉冲频谱信噪比可达68.48 dB,在稳定的锁模状态下波长信道数最大为5。此外,腔内偏振无关隔离器被替换为偏振相关隔离器后,将锁模脉冲加载数字信号同步调制,测得的眼图光信噪比提高了8.67 dB。测试结果表明,锁模脉冲的时间稳定性得到有效提升。     

半导体可饱和吸收镜实现固体激光器皮秒锁模的机理研究

对半导体可饱和吸收镜(SESAM)实现固体激光器皮秒锁模的机理进行了研究。通过对染料锁模介质和SESAM的结构对比,对SESAM皮秒锁模机理提出了一个新的解释。其在锁模激光器中充当锁模器件时,不仅仅是一个吸收体,同时也是一个增益介质。当腔内增益和损耗保持平衡时实现稳定的连续锁模。     

被动谐波锁模Er3+/Yb3+共掺双包层光纤环形腔激光器

 为了实现高重复频率和高功率的光脉冲,实验采用Er³⁺/Yb³⁺共掺双包层光纤作为增益介质,稳定的中心波长为976 nm的高功率半导体激光器作为泵浦源,利用非线性偏振旋转锁模技术,得到稳定的自起振锁模光脉冲。当泵浦功率为2.4 W时,激光器输出重复频率为8.829 MHz的连续锁模光脉冲,平均输出功率为52.5 mW,自起振锁模泵浦阈值功率为0.6 W,并观测到了稳定的高阶谐波锁模、调Q和调Q-锁模光脉冲输出。     

Routes to chaos and mode-locking in interferometers with nematic film inserts

The influence of time-dependent periodic optical drive in the Fabry-Perot interferometer system has been investigated using a theoretical model equation. A variety of features such as different routes to chaos, multiperiodic oscillations, coexistence of multiple attractors and mode-locking with devil’s staircase are found to occur for a certain range of parametric values.