Highly Luminescent Red Phosphorescent OLED with Interfacial Layers for Hole Transport and Electron Injection

Four kinds of red phosphorescent organic light-emitting devices were fabricated and compared to investigate the effect of interfacial layers for hole transport and electron injection. 1 nm-thick LiF in the device A and C and 1 nm-thick Cs₂CO₃ in the device B and D were deposited as an electron injection layer between the anode and the electron transport layer, and 5 nm-thick layer of dipyrazion[2,3-f:2′,2′-h]quinoxaline-2,3,6,7,10,11-hexacarbonitrile[HATCN] was inserted as a hole transport interfacial layer between the hole injection layer and the hole transport layer only in the device C and D. Under a luminance of 1000 cd/m², the power efficiencies were 7.6 lm/W and 8.5 lm/W in the device A and B, and 8.6 lm/W and 13.4 lm/W in the device C and D. The quantum efficiency of the device D was 15.8% under 1000 cd/m² which was somewhat lower than those of the device A and C, but a little higher than that of the device B. The luminance of the device D was much higher than those of the other devices at a given votage. The luminance of the device D at 7 V was 23,710 cd/m², which was 13.0, 3.4, and 4.0 times higher than those of the device A, B, and C at the same voltage, respectively.     

不同表面预处理对有机电致发光显示器性能的影响

从生产角度研究了基板表面的预处理工艺对OLED性能的影响,分别用UVOzone、氧Plasma以及两者相结合的方式对基板进行表面处理,并按照生产工艺制作器件,从接触角、方阻以及光电特性等测试结果对各种表面处理的样品进行比较。结果表明以上处理都改善了器件性能,不同程度提高了器件的清洁度、亮度和发光效率,其中UVOzone和氧Plasma结合的方式处理效果最为显著,器件在10V时亮度达到79920cd/m2,比其他两种处理方式亮度提高约25%。     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

Investigation of hypersonic nozzle flow uniformity using NO fluorescence

Planar laser-induced fluorescence visualisation is used to investigate nonuniformities in the flow of a hypersonic conical nozzle. Possible causes for the nonuniformity are outlined and investigated, and the problem is shown to be due to a small step at the nozzle throat. Entrainment of cold boundary layer gas is postulated as the cause of the signal nonuniformity. PACS 47.80.Jk, 47.40.Ki, 47.60.+i     

布里奇曼法生长碲镉汞晶体的固液界面形态研究

文中综述了布里奇曼法及加速坩埚旋转技术的布里奇曼法生工碲镉汞晶体过程中固液界面形态的研究结果，简单讨论了固液界面形态对组分分布的影响，并将两种技术所得的组分分布结果进行了比较，在分析影响固液界面形态因素的基础上，认为加速坩埚旋转技术是目前改善固液界面形态的有效方法。     

室外LED显示及其在交通领域的应用

介绍了室外LED显示技术及其在道路交通信息显示领域中的应用,指出目前国内室外LED显示屏普遍存在的主要问题.结合应用于高速公路收费站的LED显示屏的设计,给出解决或者克服这些问题的方法.介绍了室外LED显示的现状,预测了其发展趋势.     

Measurement System of Uniformity between Breech Horizontal Platform and Datum Tube Axis of Rocket Artillery

The purpose of this development is to detect the parallelism between the breech horizontal platform and the datum tube axis of the rocket artillery. The located aiming mechanism at the muzzle and located adjustment mechanism at the breech are designed in the system. Besides those, the system also uses an autocollimator with accuracy of 1″ and a collimating mirror together to determine the axis of the datum tube. An electronic level with accuracy of 2″ is employed to measure and display the value of the included angle and the parameter of the inclined direction. The entire accuracy of this system is σ≤± 9.1″. This paper describes the composition and the operating principle of the system and analyzes the accuracy. The development of this system supplies reliable measurement method for new rocket artilleries and artilleries, and this technology is of a good application prospect.     

像增强器亮度增益和等效背景照度测试仪的研制

亮度增益和等效背景照度是衡量像增强器性能的两个重要参数，针对这两个参数的测试要求，阐述像增强器亮度增益和等效背景的测试原理和测试仪的结构设计。利用研制的测试仪对多种型号的像增强器的亮度增益和等效背景照度进行了测试，给出并分析了测试结果。结果表明，本测试仪的结构设计是合理有效的。     

Tail probabilities of the limiting null distributions of the Anderson–Stephens statistics

For the purpose of testing the spherical uniformity based on i.i.d. directional data (unit vectors) z_i, i=1,…,n, Anderson and Stephens (Biometrika 59 (1972) 613–621) proposed testing procedures based on the statistics S_max=max_u S(u) and S_min=min_u S(u), where u is a unit vector and nS(u) is the sum of squares of u′z_i's. In this paper, we also consider another test statistic S_range=S_max−S_min. We provide formulas for the P-values of S_max, S_min, S_range by approximating tail probabilities of the limiting null distributions by means of the tube method, an integral-geometric approach for evaluating tail probability of the maximum of a Gaussian random field. Monte Carlo simulations for examining the accuracy of the approximation and for the power comparison of the statistics are given.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.