测量输入光窗台阶指标的指示表的选择

阐述了对近贴聚焦型微通道板像增强管中输入光窗台阶高度和平整度指标进行测量时，所用指示仪表的选择依据，并详细分析了指示表在检定过程中的误差来源，进一步计算出其合成标准不确定度和扩展不确定度，从而选定可用于测试的指标表。     

Compact directed acyclic word graphs for a sliding window

Suffix trees are a well-known and widely-studied data structure highly useful for string matching. The suffix tree of a string w can be constructed in O(n) time and space, where n denotes the length of w. Larsson achieved an efficient algorithm to maintain suffix trees for a sliding window. It contributes to prediction by partial matching (PPM) style statistical data compression scheme. Compact directed acyclic word graphs (CDAWGs) are a more space-economical data structure for indexing strings. In this paper we propose a linear-time algorithm to maintain CDAWGs for a sliding window.     

回旋管输出窗热性质的研究

一、引 言 输出窗是回旋管的能量输出端口,它的特性直接影响到回旋管的性能和寿命。输出窗的设计包括电特性和热特性的研究。当输出功率增加时,热特性的研究变得非常重要以便寻求合理有效的冷却措施。 输出窗由波导和介质片(块)两部分组成。回旋管的输出波导是圆波导,介质一般做成     

Performance of in-call buffer/window allocation schemes for short intermittent file transfers over broadband packet networks

While static open loop rate controls may be adequate for handling continuous bit rate (CBR) traffic, relatively smooth data traffic, and relatively low speed bursty data traffic over broadband integrated networks, high speed bursty data sources need more dynamic controls. Burst level resource allocation is one such dynamic control. Potential benefits and other issues for burst level resource parameter negotiations for bursty data traffic over high speed wide area packet networks have been discussed earlier.^1–6 A detailed analysis of an adaptive buffer/window negotiation scheme for long file transfers using these concepts is presented in Reference 1. In this paper we discuss two burst level buffer/window negotiation schemes for short intermittent file transfers, focusing on the specific needs of such traffic streams. We develop closed network of queues models to reflect the behaviour of the proposed schemes. These models, while being simple, capture essential details of the control schemes. Under fairly general assumptions, the resulting network of queues is of product form and can be analysed using the mean value analysis. We use such an analysis to compare the proposed schemes and to determine appropriate sizes of trunk buffers to achieve the desired balance between bandwidth utilization and file transfer delay. The effects of other parameters on the performance of these schemes as well as on the buffer sizing rules are also discussed. Burst level (in-call) parameter negotiation may be carried out by the end system with the network elements or by an interface system (access controller) with the broadband network elements. We discuss implications of this location as well as the needed protocol features. Finally, the service discrimination capabilities desired at the trunk controllers in switching nodes are briefly discussed.     

基于优化探测窗口的光斑质心探测方法

哈特曼-夏克波前传感器进行波前探测时，用子孔径光斑强度的一阶矩来计算光斑质心位置，子孔径窗口作为探测窗口，但探测时子孔径窗口内噪声对一阶矩有很大的影响，会使质心探测精度产生很大的误差。因此在计算质心位置时探测窗口的选取对探测精度有重要影响，必须选取合适的探测窗口来提高光斑质心探测精度。为此，在传统算法的基础上提出优化探测窗口的方法来提高质心探测精度,仿真和实验结果表明新方法提高了质心探测的精度，未经处理的高噪声恢复波前的波前残差峰谷值是2.851 4λ，均方根值是0.606 3λ，优化探测窗口后波前残差的峰谷值是1.636 2 λ，均方根值是0.367 1 λ，重构误差减小了40％。证明了算法的可行性和稳定性。     

自动替代虚假点数据的数据处理方法

本文给出自动剔除虚假点并使用合理值加以替代的方法。     

High sensitivity CW-cavity ring down spectroscopy of water in the region of the 1.5 μm atmospheric window

The absorption spectrum of natural water vapour around 1.5 μm has been recorded with a typical sensitivity of 5 × 10⁻¹⁰ cm⁻¹ by using a CW-cavity ring down spectroscopy set up based on fibred DFB lasers. A series of 31 DFB lasers has allowed a full coverage of the 6130.8-6748.5 cm⁻¹ (1.63-1.48 μm) region corresponding to the H transparency band of the atmosphere. The line parameters (wavenumber and intensity) of a total of 5190 lines, including 4247 lines of water vapor, were derived by a one by one fit of the lines to a Voigt profile. Different isotopologues of water (H₂¹⁶O, H₂¹⁸O, H₂¹⁷O, and HD¹⁶O) present in natural abundance in the sample contribute to the spectrum. For the main isotopologue, H₂¹⁶O, 2130 lines were measured with line intensities as weak as 10⁻²⁹ cm/molecule while only 926 lines (including a proportion of 30% inaccurate calculated lines) with a minimum intensity of 3 × 10⁻²⁷ cm/molecule are provided by the HITRAN and GEISA databases. Our comparison in the whole 5750-7965 cm⁻¹ region, has also evidenced that an error in the process of conversion of the intensity units from cm⁻²/atm to cm⁻¹/(molecule × cm⁻²) at 296 K, has led to H₂¹⁶O line intensities values listed in the HITRAN-2000 database, systematically 8 % below the original FTS values. The rovibrational assignment was performed on the basis of the ab initio calculations by Schwenke and Partridge with a subsequent refinement and validation using the Ritz combination principle together with all previously measured water transitions relevant to this study. This procedure allowed determining 172, 139, 71, and 115 new energy levels for the H₂¹⁶O, H₂¹⁸O, H₂¹⁷O, and HD¹⁶O isotopologues, respectively. The results are compared with the available databases and discussed in regard of previous investigations by Fourier transform spectroscopy. The spectrum analysis has showed that most of the transitions which cannot be assigned to water are very weak and are due to impurities such as carbon dioxide and ammonia, leaving only about 3% of the observed transitions unassigned. The interest of a detailed knowledge of water absorption for trace detectors developed in the 1.5 μm range is underlined: for instance HDO contributes significantly to the considered spectrum while no HDO line parameters are provided by the HITRAN database.     

软x射线近贴显微技术

软x射线近贴显微技术不但可使活的生物样品成象,分辨率高于光学显微镜,而且人为的样品准备程序在该技术中都可避免。本文描述了用高功率激光打靶产生的等离子体作为软x射线源而进行的近贴显微研究,并得到了分辨率好于1μm的结果。     

软X射线显微术Si_3N_4薄膜窗口的研制

介绍了在软Ｘ－射线显微术研究领域中有重要应用的Ｓｉ_３Ｎ_４薄膜窗口的实验室制作方法，并形成一套独特制备工艺，Ｓｉ_３Ｎ_４薄膜窗口的研制成功推动了我国软Ｘ射线显微术研究的发展。     

Spectral regions selection to improve prediction ability of PLS models by changeable size moving window partial least squares and searching combination moving window partial least squares

Changeable size moving window partial least squares (CSMWPLS) and searching combination moving window partial least squares (SCMWPLS) are proposed to search for an optimized spectral interval and an optimized combination of spectral regions from informative regions obtained by a previously proposed spectral interval selection method, moving window partial least squares (MWPLSR) [Anal. Chem. 74 (2002) 3555]. The utilization of informative regions aims to construct better PLS models than those based on the whole spectral points. The purpose of CSMWPLS and SCMWPLS is to optimize the informative regions and their combination to further improve the prediction ability of the PLS models. The results of their application to an open-path (OP)/FT-IR spectra data set show that the proposed methods, especially SCMWPLS can find out an optimized combination, with which one can improve, often significantly, the performance of the corresponding PLS model, in terms of low prediction error, root mean square error of prediction (RMSEP) with the reasonable latent variable (LVs) number, comparing with the results obtained using whole spectra or direct combination of informative regions for a compound. Regions consisting of the combinations obtained can easily be explained by the existence of IR absorption bands in those spectral regions.