磁浸没透镜的宽束曲轴像差分析的微分代数方法研究

微分代数是计算机数值分析领域中的一个非常有效的方法,可以实现任意高阶微分的准确计算.本文根据微分代数方法的基本原理,将其引入到磁浸没透镜的宽束曲轴像差的分析计算中,得到了任意阶曲轴像差的微分代数表达式.文中针对轴上磁场具有某种解析表达式的一个实际的磁浸没透镜系统,利用微分代数的曲轴像差分析方法,计算了它的曲轴像差,并给出了全部二阶和三阶几何像差的分布图形.     

介质靶表面的充电效应对等离子体浸没离子注入过程中鞘层特性的影响

针对等离子体浸没离子注入技术在绝缘体表面制备硅薄膜工艺，采用一维脉冲鞘层模型描述介质靶表面的充电效应对鞘层厚度、注入剂量及靶表面电位等物理量的影响.数值模拟结果表明：随着等离子体密度的增高，表面的充电效应将导致鞘层厚度变薄、表面电位下降以及注入剂量增加，而介质的厚度对鞘层特性的影响则相对较小. 关键词： 等离子体浸没离子注入 脉冲鞘层 绝缘介质 充电效应     

Curvature Conditions for Immersions of Submanifolds and Applications

Some curvature conditions about the geodesics emanating from a submanifold are obtained. These conditions are used to to study the topological and geometric properties of the ambient spaces which admit some minimal submanifolds.     

Plasma immersion ion implantation for SOI synthesis: SIMOX and ion-cut

We have demonstrated feasibility to form silicon-on-insulator (SOI) substrates using plasma immersion ion implantation (PIII) for both separation by implantation of oxygen and ion-cut. This high throughput technique can substantially lower the high cost of SOI substrates due to the simpler implanter design as well as ease of maintenance. For separation by plasma implantation of oxygen wafers, secondary ion mass spectrometry analysis and cross-sectional transmission electron micrographs show continuous buried oxide formation under a single-crystal silicon overlayer with sharp Si/SiO₂ interfaces after oxygen plasma implantation and high-temperature (1300°C) annealing. Ion-cut SOI wafer fabrication technique is implemented for the first time using PIII. The hydrogen plasma can be optimized so that only one ion species is dominant in concentration and there are minimal effects by other residual ions on the ion-cut process. The physical mechanism of hydrogen induced silicon surface layer cleavage has been investigated. An ideal gas law model of the microcavity internal pressure combined with a two-dimensional finite element fracture mechanics model is used to approximate the fracture driving force which is sufficient to overcome the silicon fracture resistance.     

20μm高灵敏浸没型碲镉汞红外探测器

报道了一种新型高灵敏浸没型ＨｇＣｄＴｅ红外探测器的研制，获得了Ｄ＾＊＝１．４６×１０＾１１ｃｍＨｚ＾１／２Ｗ＾－１，Ｒ＝６０８Ｖ／Ｗ，λｃ（２０％）－２０μ，灵敏元面积Ａ＝０．１２×０．１２ｍｍ＾２，和有效通光孔径ψ＝６ｍｍ的浸没型器件。     

Total absolute curvature and tightness of noncompact manifolds

In the first part we prove an extension of the Chern-Lashof inequality for noncompact immersed manifolds with finitely many ends. For this we give a lower bound of the total absolute curvature in terms of topological invariants of the manifold. In the second part we discuss tightness properties for such immersions. Finally, we give an upper bound for the substantial codimension.

     

Differential geometry of tensor product immersions

In this article we obtain the best possible estimates of the type number of tensor product immersions and investigate tensor product immersions with lowest possible type. Several classification theorems in this respect are then proved.     

Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

Calorimetric study of the immersion heats of lead(II) and chromium(VI) from aqueous solutions of Colombian coffee husk

Summary This work shows the result of the study of the Pb(II) and Cr(VI) ions adsorption by means of a Calvet type calorimeter of heat conduction that can operate at 150şC. The calorimeter was electrically calibrated to establish its sensitivity and reproducibility, obtaining K=12.95±0.05 W V^-1 and chemically it was examined with tris-(hydroxymethyl)-aminomethane (THAM)-HCl system, obtaining ΔH= -30.91±0.03 kJ mol^-1. The activated carbon sample obtained from coffee husk and the calorimetric results obtained were related to other techniques used to perform this type of studies.     

Selective separation of trace nickel(II) and gold(I) ions via hollow fiber supported liquid membrane enhanced by synergistic extractants D2EHPA/TBP

This work presents the selective and simultaneous separation of nickel (Ni²⁺) and gold ([Au(CN)₂]⁻) ions, in trace amounts, from alkaline solution via hollow fiber supported liquid membrane (HFSLM) technique. HFSLM is challengingly carried out in real rinse wastewater generated by the ENIG plating process. The influence of various chemical parameters, including the type of extractant and their concentrations, molar ratios of mixed extractant as well as type of strippant, are also studied. The organophosphorus extractant mixtures of D2EHPA and TBP provide a synergistic effect for target Ni²⁺ ions but has an antagonistic effect as regards the extraction of non-target [Au(CN)₂]⁻ ions. Compared to other inorganic acids, HCl is seen to be the most suitable strippant for the selective stripping. Results demonstrate that percentages of extraction and stripping of Ni²⁺ ions achieved 85.7 and 83.2%, respectively. In contrast, percentages of extraction and stripping of non-target [Au(CN)₂]⁻ ions attained 15.6 and 1.94%.