Photochemical Reactions of Protein Tryptophanyls in the Eye Lenses of Rats in the Presence of Chloroform

The modifying action of chloroform on photochemical reactions induced in the eye lenses of rats by UVB radiation is revealed. In anesthetic concentrations, halogenmethane increases the quantum yield of photodisintegration of protein tryptophanyls with formation of a new photochemical product that absorbs radiation in the UVA range and possesses the photosensitizing activity.     

甲基红掺杂液晶E7的光限幅特性研究

研究了甲基红染料掺杂的液晶混合物E7对波长为 5 32nm的纳秒脉冲激光的光限幅特性 ,观察了激光通过液晶盒后的远场光强分布及其随入射光能量的变化。实验发现 ,对于厚度为 4 6 μm ,重量体积比为 6mg/ 0 5ml的甲基红染料掺杂的液晶混合物E7薄膜 ,其最初三次测试的箝位输出值分别为 0 70 μJ,1.0 0 μJ和 1 5 2 μJ ,输入限幅阈值在 2 3～ 2 8μJ之间。这种薄膜的极低箝位输出特性对用于人眼和传感器保护的光限幅应用很有意义     

Experimental study of interband and intraband crosstalk in WDM networks

The impacts of interband and intraband erosstalk are studied and compared experimentally. Results show that interband crosstalk can be removed with narrow-band filters and has no influence on signal. Intraband crosstalk will result in signal eye diagram close and BER increasing. When the polarization states of signal and crosstalk align, intraband crosstalk seriously decreases signal quality. But when they misalign, it has little influence. Coherent and incoherent crosstalk are studied experimentally. Results show that coherent crosstalk is less harmful to system performance than incoherent crosstalk.     

超声弹性成像应用在角膜疾病诊断中的有限元分析

弹性成像在医学成像领域具有广阔的应用前景.在本文中,有限元法被用于模拟角膜组织的超声弹性成像,通过改变角膜病变组织与正常组织杨氏模量的数值大小及分布,模拟角膜病变的不同情形,分析计算各种不同情形时的应变、应力和位移分布,并对仿真结果进行分析.当角膜正常组织与病变组织的杨氏模量之比为1:4时,病变区域中心的应变为-0.00854,而对应正常角膜相同位置的应变为-0.02277,为病变区域中心的应变值的2.67倍.病变区域中心的应力为0.04337,而对应正常角膜相同位置的应力为0.02729,相当于病变区域中心的应力值的0.64倍.当角膜正常组织与病变组织的杨氏模量之比为4:1时,情况刚好相反.基于角膜组织的粘弹性,优化了角膜组织模型.结果表明,利用应变压缩方法可以实现离体组织的弹性成像,超声弹性成像中病变组织与正常组织的生物力学响应差异明显,研究结果可为弹性成像在眼科临床应用上提供理论指导.     

一种新的基于显著图的视线跟踪方法

针对现有视线跟踪系统设备复杂、标定过程繁琐等方面的不足,提出了一种新的基于显著图的视线跟踪方法。通过红外光源设备在人眼角膜上产生的光斑中心与瞳孔中心建立瞳孔-角膜反射向量,然后将该向量作为视觉特征重构了基于显著图的视线跟踪算法。实验结果证明,提出的方法不仅缓解了视线跟踪系统标定过程繁琐的问题,而且对提高系统的精度和健壮性有一定的促进作用,这为面向人机交互的视线跟踪研究提供了可行的低成本解决方案。     

一种应用于LCoS光机的复眼照明系统仿真设计

复眼照明系统利用复眼透镜,可实现高亮度和较好的亮度均匀性,并且有较成熟的偏振处理方法,在投影系统特别是基于偏振光的投影系统中能提供比光棒照明系统更加高的亮度和好的均匀性的画面,使得光能利用率和图像均匀性有了较大的提高。在对复眼照明系统的原理进行分析的基础上,设计了一种用于投影光机的复眼照明系统,并用Matlab对该系统进行了光线追迹的仿真程序设计。对复眼照明系统的光线追迹进行了仿真。实际应用证明,在LCoS中采用本方案设计的照明系统比光棒照明系统具有更高的亮度和更好的均匀性。     

单片集成GaAs PIN/PHEMT光接收机前端工艺研究

利用0.5μm GaAs PHEMT技术研究了适用于单片集成GaAs PIN/PHEMT光接收机前端的关键工艺,解决了台面工艺和PHEMT平面工艺的兼容性问题,包括不同浓度磷酸系腐蚀液对台面腐蚀均匀性的影响、台面与平面共有金属化工艺对光刻技术的要求。结果表明,工艺技术完全满足单片设计要求,研制得到的单片集成光接收机前端在输入1Gb/s和2.5Gb/s非归零(NRZ)伪随机二进制序列(PRBS)调制的光信号下得到较为清晰的输出眼图。     

New application of human eye model in the verification of spot diagram with refractive diopter

In response to the rapid advancement of auto-refractor technology, most optometry shops provide refraction services. Despite their speed and convenience, the measurement values provided by auto-refractors include a significant degree of error due to psychological and physical factors. Therefore, there is a need for repetitive testing to obtain a smaller mean error value. However, even repetitive testing itself might not be sufficient to ensure accurate measurements. Therefore, research on a method of measurement that can complement auto-refractor measurements and provide confirmation of refraction results needs to be conducted. The customized optometry model described herein can satisfy the above requirements. From the existing optical technologies, using human eye measurement devices to obtain individual relevant optical feature parameters is no longer difficult. These parameters allow us to construct an optometry model for individual eyeballs. They also allow us to compute spot diagrams produced from the optometry model using the CODE V macro programming language before recognizing the geometrical spot diagram with the back-propagation neural network algorithm to obtain the accurate refractive diopter. Results show that the accuracy achieved was above 98% and that this application could significantly enhance the service quality of refraction.     

Visual detection of Al ions using conjugated copolymer-ATP supramolecular complex

A colorimetric Al³⁺ sensor based on fluorescence recovery of a conjugated copolymer-ATP complex is proposed. An optimized ratio of two polythiophene (PT) monomers is utilized to synthesize copolymer (CP) that yielded maximized colorimetric response for Al³⁺ in deionized (DI) and tap water. The electrostatic disassembly of CP-ATP upon addition of Al³⁺ led to an evident visual color change. The lowest concentration of Al³⁺ for naked eye observation is around 4 μM, which is below the threshold levels in drinking water according to European Economic Community (EEC) standard. Besides, the proposed assay showed a similar response to Al³⁺ in tap water. The proposed methodology showed selective and sensitive detection for Al³⁺ in analytically relevant concentration ranges without involving sophisticated instrumentation, illustrating the applicability for on-site drinking water monitoring.     

一种基于标准化人眼图像的视线估计算法

本文提出了一种基于标准化人眼图像的视线估计算法,能有效解决头部运动对视线估计的影响.本算法在一个红外摄像机和三个红外光源的条件下,利用三个光斑(光源在角膜表面的反射点)的图像信息,将人眼图像变换到标准化人眼图像.通过引入标准化人眼图像,使屏幕平面到标准化人眼图像平面的射影变换为定值,从而使标准化人眼图像的瞳孔中心和屏幕上的视点的变换关系为定值,由此解决了头部运动对视线估计的影响.实验结果验证了该算法在头部运动情况下的有效性.