The Heterointerface between Fe1/NC and Selenides Boosts Reversible Oxygen Electrocatalysis

The rational design and construction of efficient and inexpensive bifunctional oxygen electrocatalysts are highly desirable for the development of rechargeable Zn–air batteries (ZABs). Although single-atom Fe sites anchored on N-doped carbon catalysts (Fe₁/NC) ensure high oxygen reduction reaction activity, their unitary atomically dispersed active center faces difficult condition in catalyzing oxygen evolution reaction simultaneously. Herein, a composite catalyst containing heterointerface between Fe₁/NC and selenides ((Fe,Co)Se₂) is constructed. The obtained (Fe,Co)Se₂@Fe₁/NC exhibits extremely narrow potential gap of 0.616 V and remarkable stability in alkaline media, outperforming the benchmark catalysts (Pt/C+RuO₂: 0.720 V). Experimental results and density functional theory calculations reveal that heterointerface between Fe₁/NC and (Fe,Co)Se₂ accelerates the electron transfer and provides more moderate adsorption sites, which endow (Fe,Co)Se₂@Fe₁/NC with extremely high bifunctional oxygen catalytic activity. This study not only provides a superior bifunctional catalyst for ZABs, but also enriches the application of single-atom catalysts in multifunctional energy storage and conversion devices.     

Metal Single-Site Molecular Complex–MXene Heteroelectrocatalysts Interspersed Graphene Nanonetwork for Efficient Dual-Task of Water Splitting and Metal–Air Batteries

Development of multifunctional electrocatalysts with high efficiency and stability is of great interest in recent energy conversion technologies. Herein, a novel heteroelectrocatalyst of molecular iron complex (Fe_MC)-carbide MXene (Mo₂TiC₂T_x) uniformly embedded in a 3D graphene-based hierarchical network (GrH) is rationally designed. The coexistence of Fe_MC and MXene with their unique interactions triggers optimum electronic properties, rich multiple active sites, and favorite free adsorption energy for excellent trifunctional catalytic activities. Meanwhile, the highly porous GrH effectively promotes a multichannel architecture for charge transfer and gas/ion diffusion to improve stability. Therefore, the Fe_MC–MXene/GrH results in superb performances towards oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) in alkaline medium. The practical tests indicate that Zn/Al–air batteries derived from Fe_MC–MXene/GrH cathodic electrodes produce high power densities of 165.6 and 172.7 mW cm⁻², respectively. Impressively, the liquid-state Zn–air battery delivers excellent cycling stability of over 1100 h. In addition, the alkaline water electrolyzer induces a low cell voltage of 1.55 V at 10 mA cm⁻² and 1.86 V at 0.4 A cm⁻² in 30 wt.% KOH at 80 °C, surpassing recent reports. The achievements suggest an exciting multifunctional electrocatalyst for electrochemical energy applications.     

A Fullerene Seeded Strategy for Facile Construction of Nitrogen-Doped Carbon Nano-Onions as Robust Electrocatalysts

Carbon nano-onions (CNOs) as a novel form of carbon materials hold peculiar structural features but their electrocatalytic applications are largely discouraged by the demanding synthesis conditions (e.g., ≥1500 °C and vacuum). Using C₆₀ fullerene molecules as the sacrificial seeds and melamine as the main feedstock, herein, a novel strategy for the facile construction of CNOs nanoparticles is presented with ultrafine sizes (≈5 nm) at relatively low temperatures (≤900 °C) and atmospheric pressure. During the calcination, in-depth characterizations reveal that C₆₀ can retain the melamine-derived graphitic carbon nitride from complete sublimation at high temperatures (≥700 °C). Owing to the N removal and subsequent pentagon generation, severely deformed graphitic fragments together with the disintegrated C₆₀ molecules merge into larger sized nanosheets with high curvature, eventually leading to the formation of N-doped defect-rich CNOs. Owing to the integration of multiple favorable structural features of pentagons, edges, and N dopants, the CNOs obtained at 900 °C present superior oxygen reduction half-wave potential (0.853 V_RHE) and zinc–air cathode performance to the commercial Pt/C (0.838 V_RHE). Density functional theory calculation further uncovers that the carbon atoms adjacent to the N-doped edged pentagons are turned into the ORR-active sites with O₂ protonation as the rate-determining step.     

活性位高度暴露的钴/氮/碳电催化剂的构建及氧还原性能研究

金属/氮/碳催化剂（M/N/C，M=Fe、Co等）是最有发展前景的非贵金属电催化剂之一，其性能依赖于催化剂表面的活性物种密度.通过常规的热解含氮前驱物与金属盐的方法制得的催化剂往往存在金属活性物种被包埋而不能有效利用的缺点.考虑到石墨相氮化碳（g-C₃N₄）富含类吡啶氮和亚纳米孔腔结构，将g-C₃N₄包覆在高导电性碳纳米笼（hCNC）表面，进而利用表层g-C₃N₄的配位和限域作用锚定大量Co²⁺离子，获得的Co/g-C₃N₄/hCNC复合物经热解后形成了活性位高度暴露、导电性好、孔结构丰富的Co/N/C催化剂.800℃热解得到的最优化催化剂在碱性介质中展现出优异氧还原活性，其起始电位（0.97 V）与商业Pt/C催化剂相当，且抗甲醇干扰性能和稳定性优异.此项研究提供了一种构建具有高度暴露活性位的M/N/C催化剂的有效策略.     

直接甲醇燃料电池阳极电催化剂

直接甲醇燃料电池作为未来清洁的动力能源，由于具有下列优点：操作温度低(<100℃)、燃料易储存和运输、能量效率高、污染低和燃料启动快而受到人们广泛的关注。阳极电催化剂是直接甲醇燃料电池最重要的组成部分。本文综述了近三年来直接甲醇燃料电池阳极电催化剂最新的研究进展，主要对催化剂制备方法、新型碳载体材料、催化剂类型作了详细的评述，展望了未来甲醇电催化氧化催化剂的发展，指出了电催化剂面临的问题。     

Atomic-Scale Dispersed Fe-Based Catalysts Confined on Nitrogen-Doped Graphene for Li-S Batteries: Polysulfides with Enhanced Conversion Efficiency

Lithium-sulfur batteries have been considered as potential electrochemical energy-storage devices owing to their satisfactory theoretical energy density. Nonetheless, the inferior conversion efficiency of polysulfides in essence leads to fast capacity decay during the discharge/charge cycle. In this work, it is successfully demonstrated that the conversion efficiency of lithium polysulfides is remarkably enhanced by employing a well-distributed atomic-scale Fe-based catalyst immobilized on nitrogen-doped graphene (Fe@NG) as a coating of separator in lithium-sulfur batteries. The quantitative electrocatalytic efficiency of the conversion of lithium polysulfides is determined through cyclic voltammetry. It is also proven that the Fe-N_X configuration with highly catalytic activity is quite beneficial for the conversion of lithium polysulfides. In addition, the adsorption and permeation experiments distinctly indicate that the strong anchoring effect, originated from the charge redistribution of N doping into the graphene matrix, inhibits the movement of lithium polysulfides. Thanks to these advantages, if the as-prepared Fe@NG catalyst is combined with polypropylene and applied as a separator (Fe@NG/PP) in Li-S batteries, a high initial capacity (1616 mA h g⁻¹ at 0.1 C), excellent capacity retention (93 % at 0.2 C, 70 % at 2 C), and superb rate performance (820 mA h g⁻¹ at 2 C) are achieved.     

Nanoporous Surface High-Entropy Alloys as Highly Efficient Multisite Electrocatalysts for Nonacidic Hydrogen Evolution Reaction

Electrocatalytic hydrogen evolution in alkaline and neutral media offers the possibility of adopting platinum-free electrocatalysts for large-scale electrochemical production of pure hydrogen fuel, but most state-of-the-art electrocatalytic materials based on nonprecious transition metals operate at high overpotentials. Here, a monolithic nanoporous multielemental CuAlNiMoFe electrode with electroactive high-entropy CuNiMoFe surface is reported to hold great promise as cost-effective electrocatalyst for hydrogen evolution reaction (HER) in alkaline and neutral media. By virtue of a surface high-entropy alloy composed of dissimilar Cu, Ni, Mo, and Fe metals offering bifunctional electrocatalytic sites with enhanced kinetics for water dissociation and adsorption/desorption of reactive hydrogen intermediates, and hierarchical nanoporous Cu scaffold facilitating electron transfer/mass transport, the nanoporous CuAlNiMoFe electrode exhibits superior nonacidic HER electrocatalysis. It only takes overpotentials as low as ≈240 and ≈183 mV to reach current densities of ≈1840 and ≈100 mA cm⁻² in 1 m  KOH and pH 7 buffer electrolytes, respectively; ≈46- and ≈14-fold higher than those of ternary CuAlNi electrode with bimetallic Cu–Ni surface alloy. The outstanding electrocatalytic properties make nonprecious multielemental alloys attractive candidates as high-performance nonacidic HER electrocatalytic electrodes in water electrolysis.     

Spin polarisation in dual catalysts for the oxygen evolution and reduction reactions

Strongly correlated catalysts can be understood from precise quantum approximations. Incorporating properly electronic correlations thus let’s define Spin rules in catalysis, opening a new door towards optimum compositions for the most important reactions for a sustainable future.     

Amperometric Detection of Histamine with a Pyrroloquinoline‐Quinone Modified Electrode

A modified glassy carbon (GC) electrode was developed for the amperometric detection of biogenic amines, particularly histamine. The electrode was modified with the co‐enzyme pyrroloquinoline quinone (PQQ) by entrapment during electropolymerziation of pyrrole to form polypyrrole (PPy). This method formed a thin film on the electrode surface possessing very good stability with a shelf‐life exceeding one month without loss of signal. Optimal conditions for the PQQ/PPy electrode were determined and a linear response was found for histamine in phosphate buffer (pH 6) at +550 mV from 40 to 170 mg L^?1 with a limit of detection (S/N≥3) of 38 mg L^?1. The practical linear range offered by this method suggests ideal use for spoilage detection in fermented foods.