一种宽带矢量调制器的设计及其应用

矢量调制器是一种可以同时控制微波信号幅度和相位的器件。本文介绍了一种基于新型微带定向耦合器的宽带矢量调制器。新的耦合器结构克服了传统微带耦合器耦合度低、方向性差的问题,也不需要Lange耦合器复杂的加工工艺,在平衡放大器、移相器和衰减器等场合具有广泛的应用。其次,研究了用串联电感对衰减器中PIN二极管的寄生参数进行补偿的一种简单方法,以改善衰减器衰减量变化时的相位性能。该方法原理简单,可在一定带宽内替代复杂的平衡结构,并给出相近的性能。最后给出了矢量调制器的测试结果和它在自适应天线阵等实际系统中的应用情况,并讨论了用于提高载波和边带抑制、满足高精度要求的校准方法。     

A Multilayer Optical Packet Switching Network Based on the Kautz Graph and Optical Passive Star Couplers

The multihop optical network is the most appropriate solution to satisfy the increasing applications of Internet services. This paper extends the regular Kautz graph to one with multiple layers in order to produce more architectural variations. The connectivity between adjacent layers utilizes the systematic connection patterns of a regular Kautz graph. A routing algorithm based on its property is presented. Optical passive star (OPS) couplers are adopted to implement our new topologies. Three scheduling criteria that can solve the contention problem in the intermediate nodes are evaluated and compared in terms of their capability to improve the accessibility.     

21~28GHz波段平衡式放大器

采用OMM IC的0.2μm PHEM T工艺设计了工作在21~28 GH z的平衡式放大器。正交耦合电桥采用兰格电桥。兰格电桥和平衡式放大器的在片测试结果和仿真结果基本吻合,平衡式放大器在21~28 GH z的增益为18~20 dB,输入和输出回波损耗小于-20 dB,在26 GH z处的输出1 dB压缩点功率为21 dBm。     

光漂白法制备有机聚合物非线性定向耦合器

研究了用光漂白的方法制备PMMA/DR1聚合物非线性定向耦合器,提出了一种容易的制备方法来得到要求的耦合长度.测量了材料的光学非线性对定向耦合器两臂透过率的影响.实验结果表明由于光学非线性,耦合器的耦合长度随着入射光强度的改变而发生变化.     

声诱饵仿真试验系统

文章介绍了声诱饵仿真试验系统中的有关问题，包括：系统的组成、工作原理、对接装置结构等。建立了对接装置声耦合状态下的数学模型，对近场声压分布进行了仿真计算，得出了匹配材料厚度、发射和接收换能器的选取原则。     

Design of Polarization-independent Wavelength-interleave Coupler in Fluorinated Polyimide Waveguide

Based on the measurement of dispersion characteristic and birefractive index of the fluorinated polyimide film,a statistical optimum design method is proposed and used to realize the design of 32-and 36-wavelengths optical waveguide wavelength-interleave coupler (i,e.,interleaver) with the optimization of polarization fluctuation and wavelength interval of 0.8nm at 1550nm. The largest cross coupling ratios of the two interleavers are respectively less than 1.8% and 3.5%, while the least through coupling ratios are respectively greater than 98. 2% and 96. 5%. The output differences due to polarization fluctuation are less than 1.7% and 3.2%     

Realization of Tapered Waveguide by Stretching the Rod Waveguide

By stretching the rod waveguide with different velocities in opposite directions, the tapered waveguide can be fabricated. In condition of taking no account of volume expansion caused by heating and under the assumptions of volume conservation,the rod waveguide can be stretched freely in the heated region without being stretched outside of the heated region. A model,which shows the relation of the transition shape and the two factors, that is the ratio of two velocity and the heated region length, is presented for the shape of the taper transition through mathematic deduction. Based on this model, a desired tapered waveguide can be fabricated. The tapered waveguide are widely used for fabricating tapered fiber couplers and sensors. In addition, the conclusion can be used for fabricating fused fiber coupler.     

Si_（1－x）Ge_x／Si定向耦合器的研制

在运用ＳｉＧｅ脊形波导单模条件和有效折射率法分析ＳｉＧｅ／Ｓｉ定向耦合器结构参数的基础上，采用分子束外延和各向异性腐蚀技术制备出Ｓｉ１－ｘＧｅｘ／Ｓｉ（ｘ＝０．０５）单模定向耦合器．在波长为１．３μｍ时，平均串音小于－１８．１ｄＢ，输出功率耦合效率达到９８．１％     

An ASE Reduction Filter Using Cascaded Optical Fiber Grating Couplers in EDFA Repeater

A new configuration for an ASE reduction filter in EDFA repeaters for WDM optical transmission systems using optical fiber grating couplers (FGCs) was proposed and first demonstrated. The filtering characteristics of the proposed filter for amplified single wavelength signal and 2-channel WDM signals using EDFA were identified. It was found that the filter was effective to improve SNR in optical domain by reducing ASE noise. The required FGC characteristics for the filter were theoretically predicted under the condition that the total filter loss did not exceed 3 dB. More than 70% of drop efficiency was required in each FGC for the application of the proposed filter to an 8-channel WDM system using EDFA repeaters.     

三维射频加速腔程序包MAFIA的开发和应用

介绍了三维射频加速器计算机辅助设计(CAD)程序包MAFIA的特点、功能及其应用。用CAD的方法实现了射频加速器特别是非轴对称带耦合腔的加速器的三维腔形设计。同时介绍了节省内存、节约机时的模型方法,使得在中小型机器上运行大程序(八万条)成为可能。文章主要对L波段的加速腔进行了数值模拟,并和实验进行了比较,结果符合较好;通过三维数值模拟及图形模拟的方法比较了各种形状谐振腔的性能;计算分析了输入耦合腔及高阶模耦合器对加速腔电磁场分布等参量的影响;提出了加耦合器后谐振频率改变的补偿方法。