激光准直仪的设计性物理实验

介绍了激光准直仪的结构、工作原理及其在设计性物理实验中的应用     

自聚焦光纤对半导体激光束的准直研究

介绍了一种新颖的利用自聚焦光纤对半导体激光束的准直技术。该方法结构简单、调整方便。实验研究表明其可使大发散角的半导体激光束压缩到0.01º的数量级,适合作半导体激光器的准直元件而运用于精密测试领域。     

导弹发射姿态测量方法研究

针对导弹发射姿态测量问题,提出采用高速摄像机通过斜瞄和平瞄姿态测量方法求解导弹中轴线俯仰角和方位角,仿真典型导弹起飞段近距离姿态测量,分析两种测量方法对导弹飞行姿态测量精度和适用性。仿真结果表明:平瞄和斜瞄姿态测量方法,测量误差在0.2°以内。斜瞄方式使用更便捷,通用性好。平瞄方式测量精度高,数据处理方法、机械结构相对简单,在适合的应用场合优势明显。此分析方法、分析结果为姿态测量方法选取和研究等提供一种可行的途径,也可为其它运动目标的姿态测量提供借鉴。     

基于数字图像处理的全自动瞄准硬件设计

为利用数字图像处理技术实现导弹武器自动化瞄准,图像采集装置采用直接调焦方式 实现自动调焦;综合考虑曝光时间、光圈大小、景深等对采集图像的影响,通过计算整体清晰度,选择最佳曝光值组合;在图像采集中进行预处理,提高图像质量,减小自动瞄准中图像处理的负担。     

用光纤准直耦合光路测量大气光学湍流

阐述了利用光纤准直器对组成的耦合光路的附加损耗产生的机理,证明大气湍流运动可引起该光路的附加损耗发生随机变化。根据湍流大气光传播原理,推导出了耦合光功率与光路参数和湍流参数关系式。分析表明：实际湍流大气造成的随机附加损耗主要取决于湍流强度。实验验证了利用该光路可在很短的空气间隙内获得湍流强度的变化信息。     

一种适合视频瞄准具的电子分划叠加电路系统

对视频电子分划瞄准具进行了设计。根据视频图像电子叠加原理,完成了屏幕存储映射方式的电子分划线及操作提示符场叠加。系统核心是由单片机、视频叠加显示芯片、数字电位器和单稳态延时电路组成,具有叠加图像与场景图像同显、手动二维调节瞄准分划线位置及改变OLED亮度对比度、热图极性转换和手动非均匀校正等功能。     

双螺旋叠栅条纹检测光束准直性的两种方法

介绍双螺旋叠栅条纹检测光束准直性的基本原理,进一步就双螺旋叠栅条纹的特征参量与被测光束发散角(即光束准直精度)的关系进行分析和推导。在分析双螺旋叠栅条纹进行时,首先采用频域低通滤波提取纯叠栅条纹,然后提取纯叠栅条纹的特征参量。提出两种特征参量的提取方法,一种依次进行傅里叶变换计算相位信息的傅里叶变换方法,另一种是受传统时间相移算法启发而提出的空间相移算法,讨论了在两种方法中极坐标的重采样问题和相应的计算公式,并进行了计算机模拟。结果表明,傅里叶变换方法和空间相移算法实质都是获取叠栅条纹全场趋势的平均值,使最终光束发散角的检测具有很高的精度,对自成像条纹周期的检测误差在±2.8‰以内。     

双曲柱面-平面透镜准直特性分析

基于光线传输理论对双曲柱面-平面透镜准直半导体激光光束的特性进行了研究,并用解析的方法讨论了在有误差时各参数对准直效果的影响,为正确认识、纠正误差,尽可能发挥双曲柱面-平面透镜的准直作用,改善半导体激光器快轴方向光束的质量,提供了理论依据。     

Systematic study on visible light collimation nanostructured slits in the metal surface

We present a systematic experimental investigation on visible light collimation by a nanostructured slit flanked with a pair of periodic array of grooves in gold thin film. A wide variety of aspects are considered, such as the polarization state, the transport path of incident light, the groove-groove spacing, the groove width and depth. Our results clearly show that the relationship between the collimation wavelength and the periodicity of the slit-groove structure accords well with the surface plasmon dispersion model proposed by previous researchers. Furthermore, the surface plasmon wave phase retardation effect induced by the surface structure is also verified via the measurement for samples with different groove widths and depths. These results indicate that the detailed geometry of the groove structure has obvious impacts on the collimation effect and the angular distribution of the diffraction light in the subwavelength plasmonic system.     

X‐ray collimation by crystals with precise parabolic holes based on diffractive–refractive optics

Two crystals with precise parabolic holes were used to demonstrate sagittal beam collimation by means of a diffractive–refractive double‐crystal monochromator. A new approach is introduced and beam collimation is demonstrated. Two Si(333) crystals with an asymmetry angle of α = 15° were prepared and arranged in a dispersive position (+,?,?,+). Based on theoretical calculations, this double‐crystal set‐up should provide tunable beam collimation within an energy range of 6.3–18.8 keV (Θ_B = 71–18.4°). An experiment study was performed on BM05 at ESRF. Using 8.97 keV energy, the beam profile at various distances was measured. The experimental results are in good agreement with theoretical predictions. Owing to insufficient harmonic suppression, the collimated (333) beam was overlapped by horizontally diverging (444) and (555) beams.