Synchronous Full-Scan for Asynchronous Handshake Circuits

Handshake circuits form a special class of asynchronous circuits that has enabled the industrial exploitation of the asynchronous potential such as low power, low electromagnetic emission, and increased cryptographic security. In this paper we present a test solution for handshake circuits that brings synchronous test-quality to asynchronous circuits. We add a synchronous mode of operation to handshake circuits that allows full controllability and observability during test. This technique is demonstrated on some industrial examples and gives over 99% stuck-at fault coverage, using test-pattern generators developed for synchronous circuits. The paper describes how such a full-scan mode can be achieved, including an approach to minimize the number of dummy latches in case latches are used in the data path of the handshake circuit.     

Decomposition Methods for Differentiable Optimization Problems over Cartesian Product Sets

This paper presents a unified analysis of decomposition algorithms for continuously differentiable optimization problems defined on Cartesian products of convex feasible sets. The decomposition algorithms are analyzed using the framework of cost approx imation algorithms. A convergence analysis is made for three decomposition algorithms: a sequential algorithm which extends the classical Gauss-Seidel scheme, a synchronized parallel algorithm which extends the Jacobi method, and a partially asynchronous parallel algorithm. The analysis validates inexact computations in both the subproblem and line search phases, and includes convergence rate results. The range of feasible step lengths within each algorithm is shown to have a direct correspondence to the increasing degree of parallelism and asynchronism, and the resulting usage of more outdated information in the algorithms.     

基于低功耗双边沿D触发器的任意进制异步计数器设计

从D触发器激励表入手，分别给出了采用单边沿D触发器和双边沿D触发器的2^n进制异步加法计数器、减法计数器的设计方法．在此基础上，采用逻辑函数修改技术，通过实例讨论了基于单边沿D触发器和双边沿D触发器的异步任意进制计数器的设计．该设计方法方便，快速，具有一定的实用意义．     

自适应RBF神经网络在CDMA移动通信上行链路功率控制中的应用研究

提出了一种自适应RBF神经网络功率控制方案。详细研究了该网络在DS-CDMA通信中，进行上行链路闭环功率控制(基于信扰比(SIR))的应用理论，给出了该网络参数的计算方法。最后用计算机仿真法模拟出该控制器的运行性能。结果表明基于SIR的自适应RBF神经网络功率控制器能自适应地调整移动台的发射功率，使基站接收信号的信扰比始终非常接近于一个常数，且有比定步长功率控制更小的SIR跟踪误差，从而可以降低接收信号的中断概率、提高信道容量。     

Multisplitting Iteration Schemes for Solving a Class of Nonlinear Complementarity Problems

We consider several synchronous and asynchronous multisplitting iteration schemes for solving aclass of nonlinear complementarity problems with the system matrix being an H-matrix.We establish theconvergence theorems for the schemes.The numerical experiments show that the schemes are efficient forsolving the class of nonlinear complementarity problems.     

Cooperative Strategies for Solving the Bicriteria Sparse Multiple Knapsack Problem

For hard optimization problems, it is difficult to design heuristic algorithms which exhibit uniformly superior performance for all problem instances. As a result it becomes necessary to tailor the algorithms based on the problem instance. In this paper, we introduce the use of a cooperative problem solving team of heuristics that evolves algorithms for a given problem instance. The efficacy of this method is examined by solving six difficult instances of a bicriteria sparse multiple knapsack problem. Results indicate that such tailored algorithms uniformly improve solutions as compared to using predesigned heuristic algorithms.     

基于LabWindows/CVI的多线程测控软件设计技术

多线程技术是W in32操作系统的一项重要软件技术。CVI 6.0及其以后版本提供了线程池和异步定时器两种多线程运行机制,为测控软件的设计开发带来了一次技术飞跃。文中结合测控软件设计实例,详细介绍了在CVI平台下多线程编程技术的应用方法。     

适用于LED显示屏或照明工程的异步控制卡DS2000-M1

DS2000-M1是高性能、开放式的LED控制系统,本文从软硬件两方面简述其设计原理。     

脉冲离散效应对光纤中基于交叉相位调制的脉冲压缩的影响

通过数值模拟，分析了脉冲离散效应对单模光纤正群速色区基于暗孤子交叉不相位调制的脉冲压缩的影响，并提出了减轻这种影响的办法，作者发现，即使暗孤子与被压缩脉冲的中心波长相差很小，离散效应对脉冲压缩的影响也很大，离散效应不仅导致脉冲压缩比的减小和压缩后脉冲峰值功率的降低，而且还导致脉冲压缩所需最佳光纤长度的增加以及压缩后的脉冲呈现不对称性，还发现，若采取本文提出了的非同步耦合法，则可以明显地弥补离散效应     

一种用于心电信号采集的LCADC

设计了一种适用于心电信号处理的连续时间LCADC电路。电路去掉了传统电压模式的DAC模块,采用了N-bit电流舵DAC,解决了传统电压模式DAC存在的电容漏电问题。该电路包括一个电压至电流转换器、 7-bit电流舵DAC、电平交叉检测模块以及偏移标准补偿模块。 电路采用SMIC 0.18 μm CMOS工艺设计,电源电压为1 V。仿真结果表明,整体电路功耗为8.1 μW @500 Hz。通过MATLAB对数据进行处理,SNDR为53.8 dB @500 Hz,ENOB达到了8.64 bit,输入信号范围内SNDR范围为52.8~63.6 dB,电路功耗范围为7.3~8.5 μW。该电路适用于低频心电信号的采集。