ABS blends with phenoxy: morphology,thermal, mechanical and rheological properties

Blends of ABS (acrylonitrile–butadiene–styrene) with phenoxy(poly(hydroxyether bisphenol A)) were prepared using a Branender single screw extruder. Scanning and transmission electron micrographs (SEM, TEM) showed a typical two-phase morphology; particle-in-matrix (90/10) (ABS/phenoxy by weight), 70/30, 10/90), island/sea (30/70) and co-continuous (50/50) morphologies. The glass transition temperature (T_g) of SAN was almost unchanged in the blends, while the T_g of phenoxy increased by about 5 °C in the blends. The synergistic effect of tensile modulus and strength was noted in ABS-rich blends, where a drastic drop of ductility was seen, and the results were interpreted in terms of rubber particle migration form SAN to phenoxy phase, which was visualized by TEM. Melt viscosity showed yield in ABS-rich blends, and generally followed the log additivity.     

Lifetime prediction of ABS polymers based on thermoanalytical data

The service life of ABS polymer, stabilized by 2-(3,5-di-tert-butyl-4-hydroxyanilino)-4,6-bis(octylthio)-1,3,5-triazine and containing 50% of a modifying rubber component, was estimated from oxidative induction times measured by DSC in isothermal mode in the temperature interval 140–170°C. The lifetime of ABS powder at the actual temperature of drying was predicted by linear extrapolation according to Arrhenius. However, the extrapolated value was much longer than the real lifetime determined from the long-term oven aging tests at 70 and 90°C, simulating the industrial drying process. The effect of changes in the apparent activation energy of oxidation due to antioxidant consumption during polymer aging is discussed.     

Binding Ensembles of p53-MDM2 Peptide Inhibitors by Combining Bayesian Inference and Atomistic Simulations

Designing peptide inhibitors of the p53-MDM2 interaction against cancer is of wide interest. Computational modeling and virtual screening are a well established step in the rational design of small molecules. But they face challenges for binding flexible peptide molecules that fold upon binding. We look at the ability of five different peptides, three of which are intrinsically disordered, to bind to MDM2 with a new Bayesian inference approach (MELD × MD). The method is able to capture the folding upon binding mechanism and differentiate binding preferences between the five peptides. Processing the ensembles with statistical mechanics tools depicts the most likely bound conformations and hints at differences in the binding mechanism. Finally, the study shows the importance of capturing two driving forces to binding in this system: the ability of peptides to adopt bound conformations (ΔGconformation) and the interaction between interface residues (ΔGinteraction).     

Aperture-Adjustable and Repairable Metal-Based MOFs Catalysis Membrane for Water Purification

Precise adjustment of the pore size, damage repair, and efficient cleaning is all challenges for the wider application of inorganic membranes. This study reports a simple strategy of combining dry-wet spinning and electrosynthesis to fabricate stainless-steel metal–organic framework composite membranes characterized by customizable pore sizes, targeted reparability, and high catalytic activity for membrane cleaning. The membrane pore size can be precisely customized in the range of 14–212 nm at nanoscale, and damaged membranes can be repaired by targeted treatment in 120 s. In addition, advanced oxidation processes can be used to quickly clean the membrane and achieve 98% flux recovery. The synergistic actions of the membrane matrix and the selective layer increase the adsorption energy of active sites to oxidant, shorten the electron transfer cycle, and enhance the overall catalytic performance. This study can provide a new direction for the development of advanced membranes for water purification and high-efficiency membrane cleaning methods.     

基于曲线拟合的毫米波雷达安装角度校准方法

毫米波雷达的安装角度校准是雷达正常使用并与摄像头进行数据融合的重要前提,雷达安装角度偏 转过大会导致雷达数据与摄像头数据融合失败,影响高级驾驶辅助系统(Advanced Driving Assistance System,ADAS) 的正常使用。文中提出一种基于曲线拟合的毫米波雷达安装角度校准方法,当车辆在道路上行驶时辅以车辆输入 的车速和偏航角信息,通过2000 个静止点进行曲线拟合得到雷达需要补偿的角度。相较于选择有护栏的道路进行 绕行和在标定场地部署角反射器进行安装角度校准的方法,这种方法适用的场景种类更多并且校准时间从15 分钟 以上缩短为5 分钟以下。经过实验验证,在花费更短时间完成校准后,校准精度与其它自校准方法相同为±5°。     

Rapid and simple method for determination of Nepsilon-(carboxymethyl)lysine and Nepsilon-(carboxyethyl)lysine in urine using gas chromatography/mass spectrometry

A new procedure was developed to determine in urine the concentrations of N(epsilon)-(carboxymethyl)lysine (CML) and N(epsilon)-(carboxyethyl)lysine (CEL), the major products of oxidative modification of glycated proteins, to assess levels of oxidative stress in physiological systems. The urine samples were acetonitrile-deproteinized, then derivatized by ethylchloroformate, and N(O,S)-ethoxycarbonyl ethyl esters of amino acids were analysed by isotope dilution gas chromatography/mass spectrometry. Recovery averaged 89%. Linearity was excellent (r = 0.998-0.999) in the 0.5-25 micromol/L range for CML and CEL. The limit of detection of this assay was 0.1 micromol/L (corresponding to 0.20 pmol of CML or CEL on column). Intra-day and inter-day precisions were likewise excellent, with relative standard deviations <4.63 and <6.15%, respectively. Accuracy of CML and CEL determination (15 micromol/L) was 2.9 and 5.9% of the estimated theoretical value. The time from obtaining the urine sample to determination of the concentration from the chromatographic peak was 80 min or less. This method is sensitive, reproducible, accurate, relatively cheap and very simple. It can be useful for laboratories involved in the diagnosis and monitoring of age-related chronic diseases.     

Design of a combined ozone/electron beam process for waste water and economic feasibility of the process

A design of a combined ozone/electron beam irradiation process for treating a 50 m³/h waste water stream from a molasses processing is discussed. Moreover, a cost evaluation of such a process in comparison to a conventional ozonation/biology treatment process has been performed to assess the potential of the irradiation process for technical use. Although the result of this comparison is not bad for the irradiation process an implementation into a full scale plant would not seem to be the thing to do in the present case.     

On solving sparse band systems with three algorithms of the ABS family

In this paper, we examine three algorithms in the ABS family and consider their storage requirements on sparse band systems. It is shown that, when using the implicit Cholesky algorithm on a band matrix with band width 2q+1, onlyq additional vectors are required. Indeed, for any matrix with upper band widthq, onlyq additional vectors are needed. More generally, ifa _kj 0,j>k, then thejth row ofH _i is effectively nonzero ifj>i>k. The arithmetic operations involved in solving a band matrix by this method are dominated by (1/2)n ² q. Special results are obtained forq-band tridiagonal matrices and cyclic band matrices.The implicit Cholesky algorithm may require pivoting if the matrixA does not possess positive-definite principal minors, so two further algorithms were considered that do not require this property. When using the implicit QR algorithm, a matrix with band widthq needs at most 2q additional vectors. Similar results forq-band tridiagonal matrices and cyclic band matrices are obtained.For the symmetric Huang algorithm, a matrix with band widthq requiresq–1 additional vectors. The storage required forq-band tridiagonal matrices and cyclic band matrices are again analyzed.This work was undertaken during the visit of Dr. J. Abaffy to Hatfield Polytechnic, sponsored by SERC Grant No. GR/E-07760.     

Effects of polybutadiene-g-SAN impact modifiers on the morphology and mechanical behaviors of ABS blends

A series of PB-g-SAN impact modifiers with different ratio of PB to SAN ranging from 20.6/79.4 to 91.9/8.1 were synthesized by seeded emulsion polymerization. ABS blends were prepared by blending these PB-g-SAN impact modifiers and SAN resin. The rubber concentration of these ABS blends was kept at a constant value of 15 wt%. The influences of different impact modifier on the mechanical behavior and morphology of ABS blends have been investigated. The dynamic mechanical analysis on ABS blends shows that T_g of the rubbery phase shifts to a lower temperature, (tan δ)_max of the rubbery phase increases and then decreases with the increase of PB concentration in PB-g-SAN impact modifier. A uniform dispersion of rubber particles in the matrix can be observed when PB/SAN ratio in PB-g-SAN impact modifier is in the range from 20.6/79.4 to 71.7/28.3. When it exceeds 71.7/28.3, an agglomeration of rubber particles occurs. The mechanical tests indicate that the ABS blend, in which PB/SAN ratio in the impact modifier is 71.7/28.3, has the maximum impact strength and yield strength.     

PUF‐based solutions for secure communications in Advanced Metering Infrastructure (AMI)

Advanced metering infrastructure (AMI) provides 2‐way communications between the utility and the smart meters. Developing authenticated key exchange (AKE) and broadcast authentication (BA) protocols is essential to provide secure communications in AMI. The security of all existing cryptographic protocols is based on the assumption that secret information is stored in the nonvolatile memories. In the AMI, the attackers can obtain some or all of the stored secret information from memories by a great variety of inexpensive and fast side‐channel attacks. Thus, all existing AKE and BA protocols are no longer secure. In this paper, we investigate how to develop secure AKE and BA protocols in the presence of memory attacks. As a solution, we propose to embed a physical unclonable function (PUF) in each party, which generates the secret values as required without the need to store them. By combining PUFs and 2 well‐known and secure protocols, we propose PUF‐based AKE and BA protocols. We show that our proposed protocols are memory leakage resilient. In addition, we prove their security in the standard model. Performance analysis of both protocols shows their efficiency for AMI applications. The proposed protocols can be easily implemented.