静压下ZnS：Te中Te等电子陷阱的发光

研究了4块ZnS：Te薄膜样品(Te组分从0．5％到3．1％)的光致发光谱在常压下的温度特性．对于Te组分较小的2块样品观察到2个发光峰，分别来自Te1和Te2等电子陷阱；而对Te组分较大的2块样品则只观察到1个来自Te2等电子陷阱的发光．我们还研究了这些发光峰在低温1．5K下的流体静压压力行为．观察到与Te1有关的发光峰压力系数比ZnS带边的要大很多，而与Te2有关的发光峰压力系数则比带边小．根据Koster-Slater模型，价带态密度半宽随压力的增加是Te1中心有较大压力系数的主要原因，而Te1和Te2中心的不同压力行为则是由于压力对两者缺陷势增强的不同效果引起的．     

微波吸收法研究Mn,Cu掺杂对ZnS:Mn,Cu光生载流子复合过程的影响

采用微波吸收法，测量了ZnS:Mn,Cu粉末材料受到超短脉冲激光激发后，其光生电子和浅束缚态电子的衰减过程.发现Mn,Cu的浓度对导带电子的寿命有明显的影响，提高掺杂浓度会使光生电子的寿命大大缩短，还研究了掺杂浓度对光致发光强度的影响. 关键词： 发光材料 硫化锌 光电子 微波吸收技术     

Controllable synthesis of ZnS/PMMA nanocomposite hybrids generated from functionalized ZnS quantum dots nanocrystals

We reported controllable synthesis of ZnS nanocrystal-polymer transparent hybrids by using polymethylmethacrylate (PMMA) as a polymer matrix. In a typical run, the appropriate amounts of zinc chloride (ZnCl₂) and sodium sulfide (Na₂S) in the presence of 2-mercaptoethanol (ME) as the organic ligand were well dispersed in H₂O/dimethylformamide solution without any aggregation. In addition, the Mn-doped ZnS nanocrystals (NCs) were synthesized with similar method. Then, ZnS-PMMA hybrids were obtained via free radical polymerization in situ by using ZnS NCs functionalized with methacryloxypropyltrimethoxysilane (MPS). FT-IR characterization indicates the formation of robust bonding between ZnS NCs and the organic ligand. The TEM images show that ZnS NCs are well dispersed in PMMA matrix, and particle size of as-prepared ZnS NCs is about 2.6 nm, in agreement with the computing results of Brus’s model and Debye–Scherrer formula. The photoluminescence measurements present that ZnS NCs, Mn-doped ZnS NCs, and ZnS/PMMA hybrid show good optical properties.     

Large-scale synthesis of tube-like ZnS and cable-like ZnS-ZnO arrays: Preparation through the sulfuration conversion from ZnO arrays via a simple chemical solution route

Arrayed structures are desirable for many applications, but the fabrication of many material arrays remains a significant challenge. As a prominent II-VI semiconductor, large-scale arrayed ZnS structure has not been easily fabricated. Here, we introduce a simple structure conversion route for the synthesis of novel arrayed structures, and large-scale tube-like ZnS structure arrays and cable-like ZnS-ZnO composite arrays were successfully prepared through sulfuration conversion from arrayed rod-like ZnO structure based on a hydrothermal method at low temperature. XRD, EDS, SEM, TEM and PL are used to confirm the formation of the novel arrayed structure and trace the conversion process. The results show that the conversion ratio can be conveniently tailored by the reaction time, and the PL properties of the obtained materials can be adjusted through the conversion ratio. Especially, the cable-like structure holds the PL properties of both ZnO and ZnS structures. This simple solution method can be further extended to the preparation of other semiconductor sulfide and selenide, and can amplify the application field of large-scale arrays of semiconductors.     

硫化锌掺锰/聚乙烯醇复合纳米纤维的制备与表征

利用静电纺丝法与气固反应相结合, 成功地制备了硫化锌掺锰/聚乙烯醇复合纳米纤维, 并对所制备的复合物进行了表征, 探讨了复合物的结构及其性能.     

In Situ Fabrication of ZnS Semiconductor Nanoparticles in Layered Organic-inorganic Solid Template

Ordered ZnS semiconductor nanoparticles were in situ synthesized in metal halide perovskite organic/inorganic layered hybrids (CnH2n 1NH3)2ZnCl4 (n=10 and 12) by reaction of their spin-casting films with H2S gas. Transmission electron microscopy, UV-vis spectroscopy and small-angle X-ray diffraction were used to characterize the morphology and the structure of formed nanoparticles. Obtained results indicate an effective way to incorporate functional inorganic nanoparticles into structured organic matrices.     

Application of L-Cysteine-Capped ZnS Nanoparticles in the Determination of Nucleic Acids Using the Resonance Light Scattering Method

Nanometer-sized L-cysteine-capped ZnS particles were synthesized by a colloidal aqueous method. The functionalized nanoparticles are water-soluble and suitable for biological applications. In Tris-HCl buffer solution, nucleic acids combine with cysteine-capped nano-ZnS particles by intermolecular forces to form larger nanoparticles. There are two resonance light scattering peaks at 304.5nm and 373.8nm, respectively. The enhanced RLS is related to the concentration of nucleic acids in the range of 0.04 to 1.2µgmL^–1 for calf thymus DNA and 0.2 to 1.0µgmL^–1 for fish sperm DNA. The detection limits (3) are 19ngmL^–1 for calf thymus DNA and 23ngmL^–1 for fish sperm DNA, respectively. Four synthetic samples were analyzed satisfactorily.     

Preparation and characterization of high-specific-surface-area activated carbons from K2CO3-treated waste polyurethane

An activated carbon with high specific surface area was prepared from polyurethane foam by chemical activation with K2CO3 and the influences of carbonization temperature and impregnation ratio on the pore structure of the prepared activated carbon were investigated. It was found that the specific surface area of the activated carbon was at a maximum value (about 2800 m(2)/g) at a carbonization temperature of 1073 K and at an impregnation ratio of 1.0. It was concluded that the polyurethane foam structure was modified during impregnation by K2CO3, K2CO3 promoted charring during carbonization, and then the weight loss behavior was changed below 700 and above 1000 K, carbon in the char was consumed by K2CO3 reduction, and this led to the high specific surface area. The prepared activated carbon had a very sharp micropore size distribution, compared with the commercial activated carbon having high specific surface area. The amounts of three organic vapors (benzene, acetone, and octane) adsorbed on the prepared activated carbons was much larger than those on the traditional coconut shell AC and the same as those on the commercial activated carbon except for octane. We surmised that the high specific surface area was due to the modification of the carbonization behavior of polyurethane foam by K2CO3.     

Molten-salt Synthesis and Properties of ZnS with Hexagonal Prism Morphology

ZnS with hexagonal prism morphology has been synthesized successfully by molten-salt method with ZnS nanoparticles as precursors, and the ZnS nanoparticles were prepared by one-step solid-state reaction of Zn（CH3COO）2·2H2O with Na2S·9H2O at ambient temperature. Crystal structure and morphology of the product were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and HRTEM. Ultraviolet-visible optical absorption spectrum of the ZnS hexagonal prism shows a distinct red shift from that of bulk ZnS crystals and photoluminescence spectrum exhibits strong emissions at 380 and 500 nm, respectively. Further experiments were designed and the formation mechanism of the ZnS hexagonal prism has been also discussed in brief.     

Zinc ions and zinc sulfide particles in sol-gel zirconium phosphate synthesis, thermal behavior and X-ray characterization

Zinc ions can be exchanged in sol-gel zirconium phosphate by using the batch or hydrothermal method. The zinc materials obtained that undergo thermal treatment after complete dehydration, can rehydrate fully or partially depending on whether half or all the zinc ions are exchanged. At high temperature syntherization is evident. By flowing sulfide acid over the zinc forms, zinc sulfide particles are formed and their amount depends on the length of time of the gas flow and on the state of hydration of the original material. This is not the case in the half exchanged zinc zirconium phosphate material. The decomposition temperature of the ZnS particles depends on their position in the exchanger: whether on the surface or between the layers of the host matrix. The XRD patterns of the materials obtained are similar to those of the sol-gel zirconium phosphate. The presence of ZnS particles is evident.