微波单片集成电路的成品率优化

采用建立管芯等效电路模型、灵敏度分析以及统计勘探法对微波单片集成电路进行成品率优化，并编制了软件，加入到ＧａＡｓＩＣＣＡＤ系统中。应用该软件对Ｘ波段低噪声ＭＭＩＣ、超宽带ＭＭＩＣ放大器进行了设计，成品率有较大的提高，电路性能有所改善。     

Organic SIMS with single massive gold projectile: Ion yield enhancement by silver metallization

The yield of CN from glycine rises from one CN per projectile impact to two when the sample is covered with a nominally 1 nm thick layer of silver. These yields were obtained for bombardment with Au₄₀₀⁴⁺ projectile with 136 keV impact energy. A multitude of CN-based clusters, e.g. Ag_xO_y(CN)_z are produced concurrently. As a result, a total of three CN-based secondary ions are generated per projectile impact. The exceptionally high yield for CN is of interest for biological SIMS.     

XD－YES：IC功能成品率模拟器的实现

首先建立缺陷空间分布和粒径分布的模型，并讨论了缺陷通过版图产生电路错误的过程，给出了ＩＣ功能成品率模拟器ＸＤ－ＹＥＳ的实现。用ＸＤ－ＹＥＳ对微电子测试图和实际ＩＣ的功能成品率模拟和分析表明，其结果与实际符合很好，从而表明ＸＤ－ＹＥＳ的可行性和实用性。     

聚乙烯醇高含水胶固定化脲酶的研究

冷冻-部分脱水法制成的聚乙烯醇高含水胶固定化脲酶活力收率及对脲素的分解能力明显高于聚丙烯酰胺囱定化脲酶,稳定性相近;用低浓度的戊二醛后处理,提高了固定化酶的稳定性。     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

An efficient metal catalyst free approach to synthesize 5-(4-(1,2,4,5 tetrazin-3-yl)benzylamino)-5-oxopentanoic acid

Despite the wide use of 1,2,4,5- tetrazines in biomaterials and materials science, currently there does not exist synthetic method(s) that can yield significant amount of 1,2,4,5- tetrazines without the use of potentially toxic metal catalysts. Here, we report a less energy intensive and more efficient metal catalyst free approach for the synthesis of an asymmetric tetrazine. A range of operating parameters such as extraction pH and temperature were regulated to achieve a practical yield nearly 1.5 times greater than the yields reported in the literature for similar synthetic procedures.     

Accounting for variability in the design of circuits with organic thin-film transistors

We experimentally verify that the methodology to account for local parameter variations and transistor mismatch known in Si CMOS technologies can be transposed to organic thin-film transistor technologies, and we present a design case that makes use of design for variability. Transistor parameter variation decreases with the square root of the transistor footprint. As a consequence, Monte Carlo simulations which take this effect into account can be executed to better predict the final circuit yield. The design case in this work is an 8-bit, organic RFID transponder chip. The yield prediction by simulations corresponds to the finally observed circuit yield.     

Reproducible method to enrich membrane proteins with high purity and high yield for an LC‐MS/MS approach in quantitative membrane proteomics

The proportionately low abundance of membrane proteins hampers their proteomic analysis, especially for a quantitative LC‐MS/MS approach. To overcome this limitation, a method was developed that consists of one cell disruption step in a hypotonic reagent using liquid nitrogen, one isolation step using a low speed centrifugation, and three wash steps using high speed centrifugation. Pellets contained plasma, nuclear, and mitochondrial membranes, including their integral, peripheral, and anchored membrane proteins. The reproducibility of this method was verified by protein assay of four separate experiments with a CV of 7.7%, and by comparative LC‐MS/MS label‐free quantification of individual proteins between two experiments with 99% of the quantified proteins having a CV ≤30%. Western blot and LC‐MS/MS results of markers for cytoplasm, nucleus, mitochondria, and their membranes indicated that the enriched membrane fraction was highly pure by the absence of, or presence of trace amounts of, nonmembrane marker proteins. The average yield of membrane proteins was 237 μg/10 million HT29‐MTX cells. LC‐MS/MS analysis of the membrane‐enriched sample resulted in the identification of 2597 protein groups. In summary, the developed method is reproducible, produces a highly pure membrane fraction, and generates a high yield of membrane proteins.