正已醇-邻、间、对二甲苯二元系固液相平衡

Melting temperatures have been measured and the solid-liquid phase diagrams constructed for 1-hexanol＋o-xylene, 1-hexanol＋m-xylene and 1-hexanol＋p-xylene. They are simple eutectic systems. Excess mole Gibbs free energies were calculated at 298.15K, showing larger positive deviations from ideal-solution behavior. The largest values of GmE are 711、 650 and 800 J•mol-1 for {o-C6H4(CH3)2＋C6H13OH}、 {m-C6H4(CH3)2 ＋ C6H13OH} and {p-C6H4(CH3)2＋C6H13OH} respectively.     

原子吸收光谱法测定裂解汽油中铅

报道了用火焰原子吸收光谱法测定裂解汽油中铅的方法。用碘 二甲苯溶液对汽油进行氧化处理,用稀硝酸进行萃取,萃取后浓缩液用原子吸收光谱法进行测定。铅含量在0～7.0μg·ml-1范围内符合比耳定律。对汽油样品进行分析时,相对标准偏差小于3.95%,对样品进行加标回收试验,回收率为97.7%～101.7%,方法的精密度和准确度良好。     

多功能空气净化器性能试验研究

研究一种新型综合式空气净化器对室内空气中颗粒物和甲醛的净化效果.实验结果表明,这种综合式空气净化器对室内可吸入性颗粒物、甲醛以及二甲苯的净化效果明显.该净化器投入使用能够高质量地净化室内污染物,大幅度改善室内空气品质.     

Thermophysical properties for (diethyl carbonate + p-xylene + octane) ternary system

The density and speed of sound of the ternary mixture (diethyl carbonate + p-xylene + octane) have been measured at atmospheric pressure and in the temperature range T = (288.15 to 308.15) K. Besides, surface tension has been also determined for the same mixture at T = 298.15 K. The experimental measurements have allowed the calculation of the corresponding derived properties: excess molar volumes, excess isentropic compressibilities, and surface tension deviations. Excess properties have been correlated using Nagata and Tamura equation and correlation for the surface tension deviation has been done with the Cibulka equation. Good accuracy has been obtained. Based on the variations of the derived properties values with composition, a qualitative discussion about the intermolecular interactions was drawn.     

Syntheses and DNA photocleavage by mono- and bis-phenothiazinium-piperazinexylene intercalators

Chromophore systems consisting of one (compound 5) or two (compound 6) phenothiazine rings covalently attached to a bis-piperazinexylene chain were synthesized and evaluated as DNA photocleaving agents. In the presence of DNA, the compounds were shown to monointercalate in their deaggregated forms and to strongly absorb red wavelengths of light. Reactions containing micromolar concentrations of compound produced robust photocleavage of plasmid DNA under near-physiological conditions of temperature and pH (22 °C and pH 7.0). Phenothiazines 5 and 6 increased the T_m of calf thymus DNA by 17 and 19 °C, indicating that significant levels of duplex stabilization were produced.     

Effects of adsorption-induced microstructural changes on separation of xylene isomers through MFI-type zeolite membranes

Various factors were found to affect the performance of MFI-type zeolite membranes in separating xylene isomers (p-xylene, PX; o-xylene, OX) by pervaporation. In this work the effect of membrane microstructure, membrane quality, and pervaporation operating conditions were investigated using three membrane microstructures: random, c-oriented, and h,0,h-oriented. Operation under pervaporation conditions means that high loadings of PX will be present in the framework; therefore, the role of PX–framework and PX–OX interactions needs to be taken into consideration. Single component experiments demonstrated that the order of experimentation with OX and PX will affect the ideal selectivity. Multi-component studies showed that membrane performance is highly dependent on the relative concentration of the isomers in the feed; the higher the PX concentration the lower the selectivity observed. However, although high selectivity (18) was observed at low PX concentrations in the feed, it was not stable over time. Similar trends were observed for all membrane microstructures but differences in the selectivity values occurred. The structural deformation caused by high loadings of PX into the silicalite crystal affects each microstructure differently, ultimately leading to differences in performance.     

A one-pot procedure for trifluoroacetylation of arylamines using trifluoroacetic acid as a trifluoroacetylating reagent

A convenient procedure for the preparation of aryl trifluoroacetamides from aryl amines is described that employs 2-4 M equiv of trifluoroacetic acid in refluxing xylene as a trifluoroacetylating agent. Addition of an amount of pyridine that is equimolar to the amount of trifluoroacetic acid present in the reaction mixture facilitates the trifluoroacetylation of rather basic arylamines.     

Adsorption of xylene isomers on ordered hexagonal mesoporous FDU-15 polymer and carbon materials

The oil industry has been facing the challenges of separation of xylene isomers, o-xylene, m-xylene and p-xylene or removing them from the environment. In our present work, we investigated the adsorption of the three isomers on two mesoporous materials, FDU-15-350 polymer and FDU-15-900 carbon materials. The isomer adsorption capacities are well correlated with their physical pore properties. It is found that the micropores are very crucial for the adsorption of these three isomers. The more micropore volume the adsorbent has, the better the adsorption capacity is. Henry’s constants were also calculated for the three isomers on the two adsorbents. Both on FDU-15-350 polymer and FDU-15-900, the Henry’s constants for the three isomers show the same trend o>m>p xylene which is coincidently in accordance with their polarity trend, indicating more polar adsorbate is preferred for adsorption on the two adsorbents. The isosteric heats of adsorption are correlated with the microporosity and the size of the adsorbate molecule. More microporosity and smaller molecules give higher heats of adsorption. Extracted information on pore properties of adsorbents by using the three isomers has very similar results as that resolved from nitrogen adsorption, indicating the feasibility of using the three isomers as adsorbates to extract pore information. This work is devoted to commemorating the 60th birthday of Professor Mieczyslaw (Mietek) Jaroniec.     

Chemical Composition and Reaction Mechanisms for Aged p‐Xylene Secondary Organic Aerosol in the Presence of Ammonia

A laboratory study was carried out to investigate the chemical composition of aged aromatic secondary organic aerosol (SOA) formed from the photoxidation of p‐xylene in the presence of ammonia (NH₃). The experiments were conducted by irradiating p‐xylene/CH₃ONO/NH₃ air mixtures without and with NO in a home‐made smog chamber. The particulate products of aged p‐ xylene SOA in the presence of NH₃ were measured by UV–vis spectrophotometry, attenuated total reflectance Fourier transform infrared (ATR‐FTIR) spectroscopy, and aerosol laser time‐of‐flight mass spectrometry (ALTOFMS) coupled with the fuzzy C‐means (FCM) clustering algorithm. The experimental results show that NH₃ does not alter the gas–particle partitioning in the photoxidation of p‐xylene without NO and that 2,5‐dimethylphenol is the predominant NH₃‐aged p‐xylene SOA without NO. However, NH₃ has a significant promotional effect on the formation of organonitrogen compounds in the OH‐initiated oxidation of p‐xylene with NO. Organic ammonium salts such as ammonium glyoxylate and p‐methyl ammonium benzoate, which are formed from NH₃ reactions with gaseous organic acids, were detected as the major particulate organonitrogen products of NH₃‐aged p‐xylene SOA with NO. 1H‐Imidazole, 4‐methyl‐1H‐imidazole, and other imidazole products of the heterogeneous reactions between NH₃ and dialdehydes of p‐xylene SOA were newly measured. The possible reaction mechanisms leading to these organonitrogen products are also discussed and proposed. The formation of imidazole products suggests that some ambient particles containing organonitrogen compounds may be the result of this mechanism. The results of this study may provide valuable information for discussing anthropogenic SOA aging mechanisms.     

Excess molar volumes and enthalpies for the binary systems propyl propanoate + o-xylene, m-xylene, and p-xylene at 298.15 K

This paper reports excess molar enthalpies, H_m^E, and excess molar volumes, V_m^E, of the binary systems {propyl propanoate + o-xylene}, {propyl propanoate + m-xylene} and {propyl propanoate + p-xylene} at the temperature 298.15 K and atmospheric pressure, over the whole composition range. V_m^E was calculated from the experimental measurement of the corresponding densities, while H_m^E was measured directly. The excess magnitudes were correlated to a Redlich-Kister type equation. Finally, we will discuss the results of the three mixtures studied here and by comparison with other binary systems containing propyl propanoate and a benzene-based compound previously published.