An ideal host-guest system to accomplish high-performance greenish yellow and hybrid white organic light-emitting diodes

Greenish yellow organic light-emitting diodes (GYOLEDs) have steadily attracted researcher's attention since they are important to our life. However, their performance significantly lags behind compared with the three primary colors based OLEDs. Herein, for the first time, an ideal host-guest system has been demonstrated to accomplish high-performance phosphorescent GYOLEDs, where the guest concentration is as low as 2%. The GYOLED exhibits a forward-viewing power efficiency of 57.0 lm/W at 1000 cd/m², which is the highest among GYOLEDs. Besides, extremely low efficiency roll-off and voltages are achieved. The origin of the high performance is unveiled and it is found that the combined mechanisms of host-guest energy transfer and direct exciton formation on the guest are effective to furnish the greenish yellow emission. Then, by dint of this ideal host-guest system, a simplified but high-performance hybrid white OLED (WOLED) has been developed. The WOLED can exhibit an ultrahigh color rendering index (CRI) of 92, a maximum total efficiency of 27.5 lm/W and a low turn-on voltage of 2.5 V (1 cd/m²), unlocking a novel avenue to simultaneously achieve simplified structure, ultrahigh CRI (>90), high efficiency and low voltage.     

Platinum Binuclear Complexes as Phosphorescent Dopants for Monochromatic and White Organic Light‐Emitting Diodes

Efficient blue‐, green‐, and red‐light‐emitting organic diodes are fabricated using binuclear platinum complexes as phosphorescent dopants. The series of complexes used here have pyrazolate bridging ligands and the general formula C^∧NPt(μ‐pz)₂PtC^∧N (where C^∧N = 2‐(4′,6′‐difluorophenyl)pyridinato‐N,C^2′, pz = pyrazole ( 1 ), 3‐methyl‐5‐tert‐butylpyrazole ( 2 ), and 3,5‐bis(tert‐butyl)pyrazole ( 3 )). The Pt–Pt distance in the complexes, which decreases in the order 1 > 2 > 3 , solely determines the electroluminescence color of the organic light‐emitting diodes (OLEDs). Blue OLEDs fabricated using 8 % 1 doped into a 3,5‐bis(N‐carbazolyl)benzene (mCP) host have a quantum efficiency of 4.3 % at 120 Cd m^–2, a brightness of 3900 Cd m^–2 at 12 V, and Commission Internationale de L'Eclairage (CIE) coordinates of (0.11, 0.24). Green and red OLEDs fabricated with 2 and 3 , respectively, also give high quantum efficiencies (～ 6.7 %), with CIE coordinates of (0.31, 0.63) and (0.59, 0.46), respectively. The current‐density–voltage characteristics of devices made using dopants 2 and 3 indicate that hole trapping is enhanced by short Pt–Pt distances (< 3.1 Å). Blue electrophosphorescence is achieved by taking advantage of the binuclear molecular geometry in order to suppress dopant intermolecular interactions. No evidence of low‐energy emission from aggregate states is observed in OLEDs made with 50 % 1 doped into mCP. OLEDs made using 100 % 1 as an emissive layer display red luminescence, which is believed to originate from distorted complexes with compressed Pt–Pt separations located in defect sites within the neat film. White OLEDs are fabricated using 1 and 3 in three different device architectures, either with one or two dopants in dual emissive layers or both dopants in a single emissive layer. All the white OLEDs have high quantum efficiency (～ 5 %) and brightness (～ 600 Cd m^–2 at 10 V).     

Effect of Heat Treatment on Luminescent Properties of White Organic Light Emitting Device

The white organic light emitting device (OLED) with single-structure using a polymer blend as the light emitting layer is fabricated. Heat treatment is used to control the ratio between the intensities of main electroluminescent spectral peaks. The electroluminescent spectrum of our device is quite similar to that of white inorganic LED produced by Nichia Corporation after being annealed, and its turn-on voltage can be decreased by 1V.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).     

三氯化钛存在下碘酸钾滴定法测定锡

提出了采用铝加铁混合还原剂还原,三氯化钛存在下碘酸钾滴定法测定锡的绝对测量方法,研究了三氯化钛抑制氧的作用效果及作用机理。应用于巴氏合金中锡含量的测定,方法简便、快速,结果准确可靠。     

基于超像素暗通道和自动色阶优化的图像去雾算法

针对暗通道先验(dark channel prior, DCP)复原图像中的光晕现象、明亮区域色彩失真、环境光估计不准确等问题,提出了基于超像素暗通道和自动色阶优化的单幅图像去雾算法。首先,由改进的White Patch Retinex算法增强图像并计算精确环境光。接着,在传统暗通道去雾算法中引入超像素图像分割和引导滤波算法,使透射率估计的稳健性与精确性得以提升。然后,采用自适应容差对明亮区域的透射率进行补偿,有效抑制明亮区域色彩失真问题。最后,以自动色阶优化算法提高图像对比度。将本文去雾算法与其他算法从主观和客观两个维度进行比较,实验结果表明：采用不同算法对不同浓度的自然雾图进行对比实验,信息熵提高0.2 bit,峰值信噪比(peak signal-to-noise ratio,PSNR)提高0.8 dB,运行效率提高。该算法对不同浓度含雾图像具有良好的适应性,复原图像色彩真实、纹理清晰、细节丰富,去雾效果良好。     

影响白砂糖色值测量结果的原因探讨

研究了水质、滤膜、溶液浓度、糖液ｐＨ值、混浊度的变化与白砂糖色值的关系。研究结果表明，溶液的ｐＨ变化影响最严重。不调整糖液ｐＨ与用ＨＣｌ或ＮａＯＨ调整糖液ｐＨ对比所得白砂糖色值的结果是满意的。标准偏差１１２～１８６，相对标准偏差１１６％～２２５％，调ｐＨ使结果偏高，导致产生系统误差。因此：测定白砂糖色值不宜调整糖液的ｐＨ。     

Wiener distributions and white noise analysis

The paper describes the structure of a new space of generalized Wiener functionals, , called the Wiener algebra, or space of Wiener distributions, and demonstrates its use in the white noise analysis. The concepts of derivatives and integrals for multi-time parameter generalized stochastic process:^N are introduced, and a derivative version of Itô's lemma is proved. The algebraic structure of and its lattice of subspaces is elaborated, and within this framework a generalized version of the Malliavin calculus is presented.     

Analysis of the Chemical Composition of Red Pigments and Inks for the Characterization and Differentiation of Contemporary Prints

Prints are one of the most popular artistic forms. They consist of an original matrix that is printed on a paper support. The stamps are part of a series, and each series is composed of a particular number of prints. Many contemporary prints are made using oil inks and synthetic pigments (reds and yellows). Inks are mainly composed of pigments (organic or inorganic) and a binding medium. The analysis of inks has the potential to facilitate and complement the identification of stamps of different origins.

Fourier transform infrared spectroscopy (FTIR) and Scanning Electron Microscopy-Energy Dispersive X-ray (SEM-EDX) are techniques that are typically available in museums and centers related to the study of works of art. Both can be classified as micro-destructive and provide complementary information about the organic and some inorganic compounds (FTIR), and the elemental composition (SEM-EDX). In this article, the two techniques were used to analyze the composition of red ink in prints. As a result of these analyses, it was possible to distinguish among nearly all of the pigments and inks, indicating that the composition of the red ink can be reliably used to differentiate between stamps of different origins in a series of prints.     

Neurofibrillary tangles and plaques are not accompanied by white matter pathology in aged triple transgenic-Alzheimer disease mice

Alzheimer's disease (AD) is a progressive neurodegenerative disorder that is the most common cause of dementia in aging populations. Although senile plaques and neurofibrillary tangles are well-established hallmarks of AD, changes in cerebral white matter correlate with cognitive decline and may increase the risk of the development of dementia. We used the triple transgenic (3xTg)-AD mouse model of AD, previously used to show that white matter changes precede plaque formation, to test the hypothesis that MRI detectable changes occur in the corpus callosum, external capsule and the fornix. T₂-weighted and diffusion tensor magnetic resonance imaging and histological stains were employed to assess white matter in older (11–17 months) 3xTg-AD mice and controls. We found no statistically significant changes in white matter between 3xTg-AD mice and controls, despite well-developed neurofibrillary tangles and beta amyloid immunoreactive plaques. Myelin staining was normal in affected mice. These data suggest that the 3xTg-AD mouse model does not develop MRI detectable white matter changes at the ages we examined.