The visible and ultraviolet organic light-emitting diodes with germanium dioxide as facile solution-processed anode buffer layer

Germanium dioxide (GeO₂) aqueous solutions are facilely prepared and the corresponding anode buffer layers (ABLs) with solution process are demonstrated. Atomic force microscopy, X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy measurements show that solution-processed GeO₂ behaves superior film morphology and enhanced work function. Using GeO₂ as ABL of organic light-emitting diodes (OLEDs), the visible device with tris(8-hydroxy-quinolinato)aluminium as emitter gives maximum luminous efficiency of 6.5 cd/A and power efficiency of 3.5 lm/W, the ultraviolet device with 3-(4-biphenyl)-4-phenyl-5-tert-butylphenyl-1,2,4-triazole as emitter exhibits short-wavelength emission with peak of 376 nm, full-width at half-maximum of 42 nm, maximum radiance of 3.36 mW/cm² and external quantum efficiency of 1.5%. The performances are almost comparable to the counterparts with poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) as ABL. The current, impedance, phase and capacitance as a function of voltage characteristics elucidate that the GeO₂ ABL formed from appropriate concentration of GeO₂ aqueous solution favors hole injection enhancement and accordingly promoting device performance.     

δ掺杂样品中空穴态的新行为

用有效质量理论研究了δ掺杂势中电子和空穴的行为。发现能量接近于δ势垒峰的空穴穿越势垒时能产生一系列谐振态。这些状态中的空穴波函数汇聚在势垒峰周围而同量子限制在势阱中的电子波函数交叠,产生光跃迁。用MBE生长的δ掺杂样品进行光调制光谱测量,发现明显的带间跃迁峰。测得的光谱峰同理论计算的能级相吻合,证实了δ势垒中空穴的新行为。     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.     

High‐Tg Carbazole Derivatives as Blue‐Emitting Hole‐Transporting Materials for Electroluminescent Devices

A series of dicarbazolyl derivatives bridged by various aromatic spacers and decorated with peripheral diarylamines were synthesized using Ullmann and Pd‐catalyzed C–N coupling procedures. These derivatives emit blue light in solution. In general, they possess high glass‐transition temperatures (T_g > 125 °C) which vary with the bridging segment and methyl substitution on the peripheral amine. Double‐layer organic light‐emitting devices were successfully fabricated using these molecules as hole‐transporting and emitting materials. Devices of the configuration ITO/HTL/TPBI/Mg:Ag (ITO: indium tin oxide; HTL: hole‐transporting layer; TPBI: 1,3,5‐tris(N‐phenylbenzimidazol‐2‐yl)benzene) display blue emission from the HTL layer. The EL spectra of these devices appear slightly distorted due to the exciplex formation at the interfaces. However, for the devices of the configuration ITO/HTL/Alq₃/Mg:Ag (Alq₃ = tris(8‐hydroxyquinoline)aluminum) a bright green light from the Alq₃ layer was observed. This clearly demonstrates the facile hole‐transporting property of the materials described here.     

Investigation of the effect of CdCl2 processing on vacuum deposited CdS/CdTe thin film solar cells by DLTS

Thin film CdS/CdTe solar cells have been prepared by conventional vacuum deposition technique. Deep level transient spectroscopy (DLTS), temperature and frequency dependent capacitance-voltage (C-V) measurements were utilised to investigate the performance limiting defect states in the CdTe layer subjected to the post deposition treatments such as CdCl₂-dipping and/or annealing in air. Five hole traps, all of which have been previously reported in the literature, were identified in as-grown CdTe at 0.19, 0.20, 0.22, 0.30 and 0.40 eV above the valence band. A single hole trap level has been evidenced at 0.45 eV after both post deposition heat and CdCl₂ treatments.     

A perylenedicarboxamide linker for DNA hairpins

The synthesis and properties of a perylenediamide diol linker and several DNA hairpins possessing this linker are described. The diol linker absorbs and fluoresces strongly in the visible. Hairpins having poly(dA)-poly(dT) stems have fluorescence quantum yields and decay times similar to those of the linker, indicating that hole injection does not occur from the singlet excited linker into the base pair domain. Fluorescence quenching by dG or dZ bases is observed when these bases are located near the linker. The strong distance dependence of fluorescence quenching is consistent with a superexchange mechanism for electron transfer. Failure to observe formation of the linker anion radical by means of femtosecond time resolved absorption spectroscopy is attributed to fast charge recombination. The properties and behavior of the perylene linker and its hairpins are compared to those of other arenedicarboxamide linkers.     

Hole-transporting [3,3′]bicarbazolyl-based polymers and well-defined model compounds

Polymers containing bicarbazolyl moieties in the main chain have been synthesized by the modified Ullmann coupling reaction from 9H,9′H-[3,3′]bicarbazolyl and different dihalo derivatives. The number-average molecular weights of the polymers synthesized were in the range of 2500-6200 with a molecular weight distribution of 1.6-3.1. Well-defined model compounds for the polymers have been synthesized by stepwise reactions. All these compounds have been found to form glasses with glass transition temperatures in the range of 57-119 °C as characterised by differential scanning calorimetry. The electron photoemission spectra of the compounds have been recorded and the ionisation potentials of 5.35-5.4 eV have been established. Room temperature hole drift mobility of the synthesized compounds molecularly dispersed in a polymer host range from 10⁻⁶ to 3 × 10⁻⁵ cm²/V s at an electric field of 10⁶ V/cm at the room temperature.     

NMR investigation on the conformational properties of N-[2-pyridyl-N-oxide]-amino derivatives

The proton NMR spectra of N-[2-pyridyl-N-oxide]-derivatives of primary and secondary ethylamines, containing a substituent R on the C atom bearing the amino function, have been completely analysed in terms of the fundamental NMR parameters. The preferred conformations of the compounds investigated were established by the indications from NOE experiments as well as: (1) the long range coupling across the five bond between the aminic hydrogen and the proton in 4-position of the pyridine-N-oxide ring (⁵J_m^H,NH ～ 0·5 c/s), (2) the value of the vicinal coupling constant in the fragment CHNH (³J_NHCH ～ 7–9 c/s), (3) the large deshielding (Δτ ～ 1–1·5 ppm) observed for the resonance position of the proton on the asymmetric C atom in secondary amine derivatives with respect to the corresponding primary ones, and (4) the diamagnetic shielding produced on protons in position 3 and 4 of the pyridine-N-oxide ring by different aromatic groups introduced in the R substituent.The NMR data confirmed the preferred rotamers previously suggested on the basis of ORD and CD measurements.     

Triplet-induced degradation: An important consideration in the design of solution-processed hole injection materials for organic light-emitting devices

Solution-processed organic light-emitting devices (OLEDs) still require improvements in their operational lifetime in order for them to become commercially viable. One factor that limits the lifetime of these devices is the instability of the hole injection layer (HIL). Therefore, understanding its degradation mechanism is crucial for the development of more stable solution-processed OLEDs. In this work, we use an archetypal fluorescent OLED in conjunction with an experimental solution-processed HIL in order to elucidate the degradation mechanism in these HILs. Our studies show that degradation is caused by triplet excitons. This new triplet-induced hole injection degradation is expected to be a common phenomenon in OLEDs, and therefore should have important implications for the design of stable HILs.     

Benzodithiophene-based small molecules with various termini as hole transporting materials in efficient planar perovskite solar cells

In this study we prepared four benzodithiophene (BDT)-based small organic molecules presenting bithiophene (TT), thiophene (FT), carbazole (CB), and triphenylamine (TPA) units, respectively, as termini, and used them as hole transporting materials for perovskite solar cells (PSCs). The high degrees of planarity of these BDT-based small molecules imparted them with high degrees of stacking and charge transport. These small molecules had suitable optical properties and energy level alignments for use in PSCs based on MAPbI₃, with compact-TiO₂ as the electron transporting layer and a BDT-based material as the hole transporting layer, in a n–i–p structure. Among our tested BDT-based materials, the PSC incorporating BDT-TT had the best performance, with an average power conversion efficiency of 13.63%.