一种北斗联合低轨星座的导航增强方法研究

单纯依靠北斗导航系统提供定位导航授时服务,存在卫星信号落地功率低、易受遮蔽和阻断的不足。针对此问题,研究了一种北斗联合低轨星座实现导航增强的系统架构;提出了一种新的适应严重遮蔽或干扰条件下,基于到达时间(TOA)和到达频率(FOA)联合观测的定位解算算法;对高中低轨混合星座条件下的覆盖特性和精度衰减因子进行了仿真分析。分析结果表明,用户可见星数平均增加了64.2%,位置精度衰减因子(PDOP)平均改善了28.7%。研究结果可为下一代北斗的论证设计与研制建设提供参考借鉴。     

基于SONET/SDH的存储网络容灾技术分析

文章分析了存储网络（SAN）容灾技术，认为在某些企业中，数据是至关重要的资产之一，是业务系统运行的血脉．保护企业的重要数据是企业成功的关键因素。文章讨论了设计容灾技术解决方案应考虑的各种因素，并给出了基于SONET／SDH的存储网络技术的体系架构设计方案。     

基于开关电流技术的连续小波变换的实现方法

开关电流技术是一种新的模拟抽样数据处理技术。开关电流电路具有一般电路不具有的优点，与标准数字CMOS工艺兼容。连续小波变换是分析非平稳信号的有力工具，在信号处理上有广泛的应用。本文提出用开关电流技术实现连续小波变换的方法，并用Matlab仿真证明了其理论可行性。     

用NILT导出的传输线瞬态分析模型

K Singhal与J Vlach的NILT(数值Laplace反变换) 技术是端接线性负载传输线分析的一种有效方法.本文利用这一NILT技术,导出了传输线的时域离散模型,由此可进行端接任意负载传输线的瞬态分析.这一模型毋须象通常的频域方法那样对传输线作有理逼近,因而不存在由此带来的数值问题,而计算量与它们相当.文中分别给出了均匀与非均匀传输线的处理,并用实例作了验证.     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

Geometric quadrisection in linear time, with application to VLSI placement

We consider the following problem: given a set of points in the plane, each with a weight, and capacities of the four quadrants, assign each point to one of the quadrants such that the total weight of points assigned to a quadrant does not exceed its capacity, and the total distance is minimized.

This problem is most important in placement of VLSI circuits and is likely to have other applications. It is NP-hard, but the fractional relaxation always has an optimal solution which is “almost” integral. Hence for large instances, it suffices to solve the fractional relaxation. The main result of this paper is a linear-time algorithm for this relaxation. It is based on a structure theorem describing optimal solutions by so-called “American maps” and makes sophisticated use of binary search techniques and weighted median computations.

This algorithm is a main subroutine of a VLSI placement tool that is used for the design of many of the most complex chips.     

深亚微米条件下的多层VLSI／MCM层分配的遗传算法

本文提出了一个深亚微米条件下的多层ＶＬＳＭＣＭ有约束分层层分配的遗传算法。该算法分为两步：首先进行超层分配，使各线网满足Ｃｒｏｓｓｔａｌｋ约束，且超层数目最少；然后进行各超层的通孔最少化二分层。与目前的层分配算法相比，该遗传算法具有目标全面，全局优化能力强等特点，是一种可应用于深亚微米条件下的ＩＣ ＣＡＤ的有效分层方法。     

Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

多处理器芯片体系结构研究

随着超大规模集成电路工艺和超级计算技术的发展，作者认为在单个芯片内集成多处理器系统将成为可能。本文详细讨论了多处理器芯片的分类和结构，着重阐述了同构型多处理器芯片的主要研究方向，并对同构型多处理器的可行性作出了分析。     

专用超大规模集成电路在LED显示系统中的应用

自1976年蒙特利尔奥运会采用了第一块黑白视频显示屏以来，各种大屏幕特别是LED显示屏得到了迅猛发展，在现代信息社会中更是随处可见。在这些显示系统中，应用了大量的不同种类的集成电路作为驱动芯片。本文叙述了运用于LED显示系统中的超大规模集成电路的强大功能。