Electrical properties and Schottky diodes using N-N′diphenyl-1-4phenylenediamine

Thin films of, N-N′diphenyl 1-4phenylene-diamineane are prepared using vacuum sublimation technique. The electrical conductivity from room temperature down to 127 K is studied. It is found that the conduction of charge carriers obeys T^−1/2 dependence on temperature. The average hopping distance, hopping energy, density of states and their variation due to post-deposition heat treatment are studied. Schottky diodes are fabricated with gold as ohmic contact and aluminium as Schottky contact. From the observed current voltage characteristics the saturation current density, diode ideality factor and the barrier height are determined. Their variation with air annealing is also investigated.     

数字电视传输流的实时码率变换系统

数字视频压缩后通常是打包成传输流的形式进行传送，年个传输流有其固定的发送码率，在某些应用场合，比如信道调制前端，需要对输入传输流码率进行改变以适应该信道要求，描述了一种全硬件实现，双路输出，实时，节目可选择的码率变换系统的原理及具体实现。     

Generic Transport Aft-body Drag Reduction using Active Flow Control

Active flow-separation control is an effective and efficient mean for drag reduction and unsteady load alleviation resulting from locally or massively separated flow. Such a situation occurs in configurations where the aerodynamic performance is of secondary importance to functionality. The performance of heavy transport helicopters and aeroplanes, having a large, and almost flat, aft loading ramp suffer from the poor aerodynamics of the aft body. Hence, a combined experimental and numerical investigation was undertaken on a generic transport aeroplane/helicopter configuration. The experimental study provided surface pressures, direct drag measurements, surface and smoke flow visualization. The baseline flow was numerically analyzed, using finite volume solutions of the RANS equations. The baseline flow around the model was insensitive to the Reynolds number in the range it was tested. The flow separating from the aft body was characterized by two main sources of drag and unsteadiness. The first is a separation bubble residing at the lower ramp corner and the second is a pair of vortex systems developing and separating from the sides of the ramp. As the model incidence is decreased, the pair of vortex systems also penetrates deeper towards the centerline of the ramp, decreasing the pressure and increasing the drag. As expected, the ramp lower corner bubble was highly receptive to periodic excitation introduced from four addressable piezo-fluidic actuators situated at the ramp lower corner. Total drag was reduced by 3–11%, depending on the model incidence. There are indications that the flow in the wake of the model is also significantly steadier when the bubble at the lower ramp corner is eliminated. The vortex system is tighter and steadier when the ramp-corner bubble is eliminated.     

Transport coefficients and defect structure of Sb2−xAgxTe3 single crystals

Incorporation of Ag in the crystal lattice of Sb₂Te₃ creates structural defects that have a strong influence on the transport properties. Single crystals of Sb_2−xAg_xTe₃ (x=0.0; 0.014; 0.018 and 0.022) were characterized by measurements of the temperature dependence of the electrical resistivity, Hall coefficient, Seebeck coefficient and thermal conductivity in the temperature range of 5-300 K. With an increasing content of Ag the electrical resistance, the Hall coefficient and the Seebeck coefficient all decrease. This implies that the incorporation of Ag atoms in the Sb₂Te₃ crystal structure results in an increasing concentration of holes. However, the doping efficiency of Ag appears to be only about 50% of the expected value. We explain this discrepancy by a model based on the interaction of Ag impurity with the native defects in the Sb_2−xAg_xTe₃ crystal lattice. Defects have a particularly strong influence on the thermal conductivity. We analyze the temperature dependence of the lattice thermal conductivity in the context of the Debye model. Of the various phonon scattering contributions, the dominant influence of Ag incorporation in the crystal lattice of Sb₂Te₃ is revealed to be point-defect scattering where both the mass defect and elastic strain play a pivotal role.     

会议电视系统及其发展现状

讨论会议电视系统的组成，种类及设计标准，介绍其发展现状及应用中存在的问题。     

Quantitative Concentration Inequalities for Empirical Measures on Non-compact Spaces

We establish quantitative concentration estimates for the empirical measure of many independent variables, in transportation distances. As an application, we provide some error bounds for particle simulations in a model mean field problem. The tools include coupling arguments, as well as regularity and moment estimates for solutions of certain diffusive partial differential equations.     

���ܶȵ�������ģ�������˲��������

用高密度等离子体模型可以计算出一整套输运参数,并且在很宽的等离子体温度和密度范围内有合理的精度,可广泛应用于Z箍缩等离子体、激光聚变和磁约束聚变等领域,并将这个模型计算出的各种输运参数拟合成了实用的公式。     

快度中心区强子物质输运系数和粘滞流体演化

用Chapman-Enskog方法计算了相对论性重离子碰撞快度中心区产生的π介子物质的输运系数,并建立了相应的粘滞流体力学方程,进而讨论了粘滞对π介子物质演化过程的影响.结果表明,粘滞将减缓快度中心区π介子物质的冷却速度.     

SCDA for 3D lattice gases with repulsive interaction

The selfconsistent diagram approximation (SCDA) is generalized for three-dimensional lattice gases with nearest neighbor repulsive interactions. The free energy is represented in a closed form through elementary functions. Thermodynamical (phase diagrams, chemical potential and mean square fluctuations), structural (order parameter, distribution functions) as well as diffusional characteristics are investigated. The calculation results are compared with the Monte Carlo simulation data to demonstrate high precision of the SCDA in reproducing the equilibrium lattice gas characteristics. It is shown that similarly to two-dimensional systems the specific statistical memory effects strongly influence the lattice gas diffusion in the ordered states. Received 7 August 2002 / Received in final form 22 January 2003 Published online 24 April 2003     

The solution of the neutron transport equation in a slab with anisotropic scattering

The neutron transport equation for a slab geometry with the extremely anisotropic scattering kernel is considered. The albedo and transmission factors are calculated using the variation method. The effect of the extremely anisotropic parameter on the variation of the slab albedo and transmission factor is calculated. The obtained results are compared with the published data.