实现多层混合刻蚀薄膜大面积均匀的方法浅探

采用多层光刻工艺结合氩离子铣的混合刻蚀方法，刻蚀高Ｔｃ超导ＹＢａＣｕＯ／ＺｒＯ２（１００）薄膜图形，取得了较好的结果。在进行氩离子镜的工艺步骤中，使用普通氩离子铣设备（离子束斑极不均匀），但采取了一定的措施─－使被刻样品在刻蚀台座上可移动，模糊地实现了薄膜的相对＂大面积＂（直径φ≥２０ｍｍ）均匀刻蚀─－可同时刻蚀２～３片６ｍｍ×１０ｍｍ薄膜，并且被刻蚀部分表面起伏约在１０ｎｍ左右。图形样品的最小线条达２μｍ，其Ｔｃ、Ｊｃ人与刻蚀前薄膜的Ｔｃ、Ｊｃ相当，即：ＴＣ为８５～９０Ｋ，Ｊｃ～１０６Ａ／ｃｍ２（在７７Ｋ下）。     

Uniformity in radon exhalation from construction materials using can technique

The uniformity in radon exhalation rates for 46 tiles of granite, marble and ceramic used as construction materials were determined using “Can Technique” employing CR-39 nuclear track detectors (NTDs). On each tile, two sealed cans, each enclosing one NTD fixed at the center of the tile surface area covered by the can, were mounted at two different locations of each individual tiles. The track production rates on the NTDs representing radon exhalation rates were measured. The radon exhalation rates from the surface of individual tiles showed uniform exhalations within the calculated uncertainties of the measured values. This makes Can Technique an alternative simple method to measure radon exhalation rates. Calibration required to convert track production rates into radon exhalation rates for the used can and NTD was done using an active technique. The correlation between the measurements by the two techniques shows a good linear correlation coefficient (0.83).     

视频编码新标准H.264中抗误码技术的研究

介绍了视频编码新标准———H .2 6 4中采用的几种抗误码技术 ,基于这些技术 ,新标准确保了压缩视频流在接收端的恢复质量。     

平台石墨炉原子吸收测磷的方法研究

研究了平台石墨炉原子吸收测定磷的方法,表明以氯化钯和硝酸钙的混合液作为基体改进剂测定生物样品中的磷效果最好,方法特征量为8×10~(-9)g,工作曲线线性范围为0～0.400吸光度,精密度好,抗干扰能力强,方法简单,利用标准曲线即可测定生物样品中磷。     

AAL层抗信元丢失技术

ＡＴＭ网络中传输视频信号存在的信元丢失会严重影响接收图象的质量，可以从视频编解码端与ＡＴＭ适配层采取抗信元丢失技术以减少该影响。不同ＡＡＬ有不同的抗信元丢失原理。本文分别对用ＡＡＬ１，ＡＡＬ２，ＡＡＬ５适配ＭＰＥＧ－２视频信号时在ＡＡＬ层采取的抗信元丢失技术进行了分析。     

智能同步光网络与多业务传送平台的应用

智能同步光网络(ASON)与多业务传送平台(MSTP)固其先进的智能性、可靠性、灵活性而得以发展和运用。本文根据智能光网络与多业务传送平台枝术的发展情况，结合北京通信传送网络的实际情况，探讨北京通信传送网的建设思路．     

傅里叶变换红外光谱固体制样技术

通过对溴化钾与纳米固体超强酸样品的比例进行了探讨 ,得出制样时溴化钾与样品比例范围为1∶ 0 .0 0 1— 1∶ 0 .0 2 9,其最佳比例范围为 1∶ 0 .0 0 98— 1∶ 0 .0 1 5 ,并且应用于其他固体样品的测定 ,结果基本一致。同时得出 ,固体样品的最少检测量为 2 .0× 1 0 -5g     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

A statistical model for global optimization by means of select and clone

A statistical model tor giobai optimization is constructed generalizing some properties ofthe Wiener process to the multidimensional case. A new approach, which is similar to the Branch and Bound approach, is proposed to the construction of algorithms based on statistical models. A two dimensional version of the algorithm is implemented, and test results are presented