双电极对双脉冲激光器结构分析

本文对双电极对双脉冲激光器的谐振腔结构进行了分析,结果表明采用双非稳腔和增大反射镜的曲率半径可分别获得单纵模和基横模输出。为使输出能量稳定,则双电极对的间距有一最小值的限制。     

The structure of multi-electrode-pair pulse laser and discharge pulse time selection

Applying multi-electrode-pair pulse TEA CO₂ laser to one optical resonance cavity will have several advantages over traditional method, including higher gain, shorter pulse discharge time interval, and in particular, continuous adjustable time interval of multi-pulse laser output can be achieved without high vacuum condition. To improve laser's working stabilization, we proposed new approaches to optimize laser structure design and discharge pulse time interval selection.     

封闭循环TEA CO2激光器用催化剂的实验研究

在不同的催化剂和不同温度的条件下,用磁氧分析仪监测了封离型TEA C0₂激光器中O₂含量随时间或脉冲次数的变化。对实验现象进行了分析。对几种催化剂的特性给出了详细的比较。     

Fe（Ⅲ）－TEA－5－Br－PADAP－H_2O_2体系中催化波的研究及其应

在０．２ｍｏｌ·Ｌ￣（－１）ＮＨ＿４Ｃｌ－ＮＨ＿３·Ｈ＿２Ｏ底液中，（ｐＨ为９．２６），得到一个极为灵敏的Ｆｅ（Ⅲ）－ＴＥＡ－５－Ｂｒ－ＰＡＤＡＰ－Ｈ＿２Ｏ＿２配合吸附催化波，其峰电位为－０．７１Ｖ（ｖｓ．ＳＣＥ）。铁浓度在１．８×１０￣（－１０）～５．４×１０￣（－６）ｍｏｌ·Ｌ￣（－１）范围内与二阶导数波高呈线性关系。对该极谱波的性质进行了研究，证明是一种配合吸附催化波，并成功地应用于各类水样，钒催化剂中微量或痕量铁的测定。     

A simple one-pot procedure for the direct conversion of alcohols into azides using TsIm

A facile and efficient method for one-pot conversion of alcohols into azides using N-(p-toluenesulfonyl)imidazole (TsIm) is described. In this method, alcohols are refluxed with a mixture of NaN₃, TsIm and triethylamine in the presence of catalytic amounts of tetra-n-butylammonium iodide (TBAI) in DMF affording the corresponding alkyl azides in good yields. This methodology is highly efficient for various structurally diverse alcohols with selectivity for ROH: 1° > 2° > 3°.     

Hydrogen analysis in solid samples by utilizing He metastable atoms induced by TEA CO2 laser plasma in He gas at 1 atm

A TEA CO₂ laser (350 mJ–1.5 J, 10.6 μm, 200 ns, 10 Hz) was focused onto a metal sub-target under He as host gas at 1 atmospheric pressure with a small amount of impurity gas, such as water and ethanol vapors. It was found that the TEA CO₂ laser with the help of the metal sub-target is favorable for generating a strong, large volume helium gas breakdown plasma at 1 atmospheric pressure, in which the helium metastable-excited state was then produced overwhelmingly. While the metal sub-target itself was never ablated. The helium metastable-excited state produced after the strong helium gas breakdown plasma was considered to play an important role in exciting the atoms. This was confirmed by the specific characteristics of the detected H emission, namely the strong intensity with low background, narrow spectral width, and the long lifetime. This technique can be used for gas and solid samples analysis. For nonmetal solid analysis, a metal mesh was introduced in front of the nonmetal sample surface to help initiation of the helium gas breakdown plasma. For metal sample, analysis can be carried out by combining the TEA CO₂ laser and an Nd–YAG laser where the Nd–YAG laser is used to ablate the metal sample. The ablated atoms from the metal sample are then sent into the region of helium gas breakdown plasma induced by the TEA CO₂ laser to be excited through the helium metastable-excited state. This technique can be extended to the analysis of other elements, not limited only to hydrogen, such as halogens.     

Syntheses of Some New Group 4 non-Cp Complexes Bearing Schiff-base, Thiophene Diamide Ligands Respectively and Their Catalytic Activities for α-Olefin Polymerization

Introduction Tremendous advances have been witnessed during the last decade in the syntheses and application of Group 4 metal complexes because of the motivity which comes from both academic and industrial field. Among them, studies have been dominated by the complexes supported by bis or mono cyclopentadienyl ligands, such as Cp2MX2 or half sandwich amide (CGC) com-plexes.1-6 At that time chemists paid a little attention to the non-cyclopentadienyl complexes, but in recent years, many chem…     

Simple test system for single molecule recognition force microscopy

We have established an easy-to-use test system for detecting receptor-ligand interactions on the single molecule level using atomic force microscopy (AFM). For this, avidin-biotin, probably the best characterized receptor-ligand pair, was chosen. AFM sensors were prepared containing tethered biotin molecules at sufficiently low surface concentrations appropriate for single molecule studies. A biotin tether, consisting of a 6 nm poly(ethylene glycol) (PEG) chain and a functional succinimide group at the other end, was newly synthesized and covalently coupled to amine-functionalized AFM tips. In particular, PEG₈₀₀ diamine was glutarylated, the mono-adduct NH₂-PEG-COOH was isolated by ion exchange chromatography and reacted with biotin succinimidylester to give biotin-PEG-COOH which was then activated as N-hydroxysuccinimide (NHS) ester to give the biotin-PEG-NHS conjugate which was coupled to the aminofunctionalized AFM tip. The motional freedom provided by PEG allows for free rotation of the biotin molecule on the AFM sensor and for specific binding to avidin which had been adsorbed to mica surfaces via electrostatic interactions. Specific avidin-biotin recognition events were discriminated from nonspecific tip-mica adhesion by their typical unbinding force (∼40 pN at 1.4 nN/s loading rate), unbinding length (<13 nm), the characteristic nonlinear force-distance relation of the PEG linker, and by specific block with excess of free d-biotin. The convenience of the test system allowed to evaluate, and compare, different methods and conditions of tip aminofunctionalization with respect to specific binding and nonspecific adhesion. It is concluded that this system is well suited as calibration or start-up kit for single molecule recognition force microscopy.     

空气中激光烧蚀铝靶冲量耦合系数实验(Ⅱ)

为了研究大气条件下,正焦移距离对冲量耦合系数的影响,采用能量为15.7(16%)J 的激光脉冲聚焦于铝靶前端,通过改变激光焦点距离靶面的位置,获得了冲量耦合系数与正焦移距离的对应关系。结果表明脉冲激光在与大气环境中的铝靶相互作用时,靶面通过能量转移获得的冲量耦合系数与激光焦点距离靶面的位置呈非单调性变化。焦移距离在从0~20 mm 之间变化时,获得的冲量耦合系数从4.4810-5 Ns/J 连续下降到1.6810-5Ns/J,随着焦移距离的进一步增大,冲量耦合系数在20~35 mm 间呈缓慢上升趋势,在35 mm 处升至2.2110-5 Ns/J 后转而下降,在45 mm 处降至1.9110-5Ns/J。文中采用大气中激光支持爆轰波与固体靶面相互作用的二维模型对上述物理过程进行理论计算,获得了与实验结果较为一致的结论。