Carbohydrate-based nanostructured catalysts: applications in organic transformations

The requirement of green and sustainable materials to prepare heterogeneous catalysts has intensified for practical reasons over the past few decades. Carbohydrates are possibly the most plentiful and renewable organic materials in nature with inimitable physiochemical properties, plausible low-cost and large-scale production, and sustainability features could be exploited in the generation of nanostructured heterogeneous catalysts. This review article outlines the organic transformations catalyzed by diverse carbohydrate-based nanostructured catalysts in greener and environmentally friendly processes. Selected examples are highlighted for a variety of organic reactions exploiting the proposed catalysts’ reactivity and reusability, and interactions with the intrinsic nature of the applied carbohydrate supports; advantages and speculated challenges of the introduced catalysts are deliberated as well.     

Molecular design of ambipolar redox-active molecules II: closed-shell systems

This mini-review highlights key structural features that should be taken into account when creating ambipolar redox-active closed-shell metal-free molecules. This type of compound is strongly required for the fabrication of all-organic ‘poleless’ batteries and semiconductors. The suggested strategies aimed at stabilization of both oxidized (cationic) and reduced (anionic) redox-states are based on the comprehensive analysis of the most successful structures taken from the recent publications.     

Electrochemical reduction of monothiobenzils in the presence of aroyl chlorides. First synthesis of (Z)-α-benzoyloxy-β-benzoylthiostilbenes

The first method for the synthesis of the title compounds has been established involving a stereoselective electrochemical diacylation process. The cathodic reductions of monothiobenzils in an aprotic medium, under constant potential, in the presence of twofold molecular amounts of aroyl chlorides provide previously unknown (Z)-α-benzoyloxy-β-benzoythiostilbenes in high to quantitative yields.     

Theory and experiment of spatially and temporally partially coherent speckle shearing interferometry

The theory and experiment of spatially and temporally partially coherent speckle shearing interferometry is reported in this rapid communication for the first time. The general requirements for the surface roughness and coherence area of a diffuse object surface in spatially and temporally partially coherent speckle shearing interferometry are discussed. An experimental verification is presented and the results of theory and experiment are in good agreement.     

Study of a vibrating plate: comparison between experimental (ESPI) and analytical results

Real-time electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a trapezoidal plate. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Fringe patterns produced during the time-average recording of the vibrating plate—corresponding to several resonant frequencies—were registered. From these interferograms, calculations of vibrational amplitudes by means of zero-order Bessel functions were performed in some particular cases. The system was also studied analytically. The analytical approach developed is based on the Rayleigh–Ritz method and on the use of non-orthogonal right triangular co-ordinates. The deflection of the plate is approximated by a set of beam characteristic orthogonal polynomials generated by using the Gram–Schmidt procedure. A high degree of correlation between computational analysis and experimental results was observed.     

Point load determination of static elastic moduli using laser speckle interferometry

Electronic speckle interferometry (ESPI) is used to determine the Young's modulus E and Poisson ratio ν of an isotropic material. Micron scale deformations of the surface of the block of polymethyl-methacrylate (PMMA) are induced by normal application of a known near-point force. These deformations are recorded in speckle interferometric fringe patterns. An iterative minimum error inversion technique is developed to obtain the elastic properties from the positions of fringe peaks and troughs observed in the fringe patterns. Sensitivity tests of the method on calculated fringe patterns using measured experimental uncertainties suggest the technique will provide measures of the elastic moduli to better than 5%. In an experimental test on a bloc of PMMA (acrylic) the technique gave values of E and ν that differed from corresponding measures obtained using more conventional strain-gauge methods by less than 4%.     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

The solution of a convection–diffusion–reaction equation arising from cathodic reduction in a pulsating crack

This paper derives the convection–diffusion-reaction equation governing the reaction between the dissolved oxygen in sea-water and the steel walls of a pulsating crack. By the neglect of the diffusion term it is shown that an exact solution of the convection-reaction equation can be obtained. A numerical method for the solution of the complete convection–diffusion-reaction equation is derived by the use of finite differences. The numerical computation of the initial transient and the final periodic steady-state values is also discussed.     

Asymmetric reduction of ketones using recombinant E. coli cells that produce a versatile carbonyl reductase with high enantioselectivity and broad substrate specificity

The gene encoding a versatile biocatalyst that shows high enantioselectivity for a variety of ketones, SCR (Saccharomyces cerevisiae carbonyl reductase), has been identified, cloned, and expressed in Escherichia coli. Two types of expression systems with high NADPH-regenerating capacities have been constructed. One is the tandem system, where the genes encoding SCR and GDH (glucose dehydrogenase) are located in the same plasmid, and the other is the two-plasmid system, where each of the SCR and GDH genes is located in separate plasmids that can coexist in one E. coli cell. Asymmetric reduction of ketones with the recombinant E. coli cells gave synthetically useful 20 alcohols, 11 of which were enantiomerically pure. The productivity of one of these products was as high as 41 g/L.     

用小波变换抑制SAR图像中的斑点噪声

抑制合成孔径雷达图像中的斑点噪声一直是处理图像并得到准确图像信息的难点，提出了一种基于小波变换抑制合成孔径雷达（SAR）图像中的斑点噪声的方法，对原有的小波变换方法作了改进，能更好地保留图像的边缘信息，并能简化计算量。在仿真实验中使用了合成的模拟图像和真实的合成孔径雷图像，并与以往的小波去噪滤波方法以及一些经典的斑点噪声滤波方法（包括中值滤波，Lee滤波，Frost滤波）进行比较，在综合考虑了滤波算法在均匀区域对斑点噪声的抑制能力以及保留边缘信息能力的情况下，提出的算法有更好的效果。