用光声谱法测量Ⅱ-Ⅵ族化合物粉末材料的吸收谱

本文报道了采用自行设计组装的光声光谱(PAS)测量系统,测定(Zn,Cd)(S,Se)粉末固溶体的带隙与组分的关系;观测ZnS:Mn粉末发光材料的光声谱,确定出Mn~(2+)五个激发态能级的位置;利用光声谱的深度剖面分析,对Cu_xS-ZnS:Mn粉末材料进行分析,获得满意的结果。表明光声谱法对凝聚态物质的研究和监测能提供多方面的信息,是一种极有用的新型光谱测量技术。     

Surfactant self-assembly structures and multilayer formation at the solid-solution interface induces by electrolyte,polymers and proteins

Recent developments in the study of the formation of self-assembled surfactant structures and multilayers at the solid-solution interface are presented. It covers a wide range of phenomena, but in this review the main focus is on the surface structures formed from dilute solution in the presence of electrolyte and in more concentrated solutions. Their formation under those conditions are set in the wider context of the more extensive observations of their occurrence in more complex polymer-surfactant mixtures. Although the sequential adsorption methods using layer-by-layer approaches are more well established for polyelectrolytes and their associated mixtures, the main emphasis is on the self-assembly. The opportunities to manipulate wetting properties and to generate enhanced wetting characteristics are discussed. The potential applications, modifying wetting behaviour, efficient near surface reservoir for enhanced and prolonged delivery of active components, and for the development of a range of smart functionalised surfaces are highlighted.     

高质量CdSe量子点的水相制备与表征

以巯基丁二酸为稳定剂, 亚硒酸钠为硒源, 制备了高质量水溶性CdSe量子点. 研究了反应时间、 镉与硒的摩尔比及镉与巯基丁二酸的摩尔比等实验条件对CdSe量子点光谱性能的影响. 分别用紫外-可见光谱、 荧光光谱、 X射线粉末衍射和透射电子显微镜等对量子点进行表征. 结果表明, 采用这种方法制得的CdSe量子点为立方晶型, 量子点的荧光发射峰在518～562 nm范围内连续可调, 并且发射峰的半峰宽始终保持在35 nm左右, 荧光量子产率可达21%.     

Substitution of Co in YBa2Fe3O8

The accommodation of Co in the oxygen-saturated solid-solution phase YBa₂(Fe_1−zCo_z)₃O_8+w has been investigated by powder X-ray and neutron diffraction techniques, as well as by Mössbauer spectroscopy. Of the nominal composition range 0.00?z?1.00 tested, the solid-solution limit under syntheses at 950°C in is z=0.47(5). No symmetry change in the nuclear and magnetic structures is seen as a consequence of the Co substitution, and the Co atoms are distributed evenly over the two sites that are square-pyramidally and octahedrally coordinated for w=0. The oxygen-saturated samples maintain their oxygen content roughly constant throughout the homogeneity range, showing that Co³⁺ replaces Fe³⁺. Despite the nearly constant value of w, Mössbauer spectroscopy shows that the amount of tetravalent Fe slightly increases with increasing z, and this allows Co to adopt valence close to 3.00 to a good approximation. The magnitude of the antiferromagnetic moment (located in the a,b plane) decreases with z in accordance with the high-spin states of the majority Fe³⁺ and Co³⁺ ions. Bond-valence analyses are performed to illustrate how the structural network becomes increasingly frustrated as a result of the substitution of Fe³⁺ by the smaller Co³⁺ ion. A contrast is pointed out with the substitution of cobalt in YBa₂Cu₃O₇ where it is a larger Co²⁺ ion that replaces smaller Cu²⁺.     

液态金属离子源聚焦离子束系统在微米/纳米技术中的应用

随着微米／纳米科学技术的发展,微细加工微区分析所用的主要技术之一－聚焦离子束技术引人注目。本文简述了具有液态金属离子源的聚焦离子束技术的主要功能,着重报道了近来该技术下述领域中的应用。     

无膦方法合成高质量CdSe纳米晶及其光学性质

以合成的十碳酸镉作为Cd前驱体, 十八烯作为单质硒溶剂, 并添加十八胺作为活性剂, 在无三丁基膦或三辛基膦参与的条件下, 以较低温度制备了具有闪锌矿结构的高质量的CdSe纳米晶. 利用吸收光谱、荧光光谱(PL)、X射线衍射(XRD)、透射电镜(TEM)对不同反应时间得到的CdSe纳米晶进行形貌和光谱性质表征. 实验结果表明, 采用该无膦法只需调控反应时间就可得到粒径均一、分散性好的CdSe纳米晶, 其荧光波长可覆盖470-630 nm的可见光区, 而荧光峰半高宽则始终保持在24-30 nm之间并具有较高的荧光量子产率(535 nm处大于60%). 最后, 对CdSe纳米晶量子产率随反应时间变化的原因进行了分析.     

单晶炉真空炉室的设计

真空炉室是单晶炉的主要部件之一 ,硅单晶的生长工艺过程都是在真空炉室内进行的。着重介绍单晶炉真空炉室的结构设计及其制造工艺。     

锌镉硫量子点增强的光催化产氢活性

光催化分解水产氢是利用太阳能解决当今能源危机和环境污染问题的理想策略.硫化镉光催化剂由于具有较窄的带隙、有效的光吸收能力、较负的导带位置和较强的还原能力等而受到广泛关注.然而,硫化镉光催化剂的光生电子-空穴复合速率高,导致其光催化活性比较低,因此在光催化领域的应用受到限制.为此,人们采取了很多方法来改善硫化镉光催化剂的光催化性能,例如加入助催化剂、构建异质结、表面修饰以及形成固溶体光催化剂等.合成固溶体光催化剂被认为是提高硫化镉光催化活性最具有发展前景的方法之一,固溶体光催化剂通过形成轨道杂化而表现出可控的带隙和带边位置.在固溶体光催化剂中,锌镉硫胶体量子点引起了很多关注.锌镉硫胶体量子点的颗粒尺寸较小,这就使得光生电子和空穴由催化剂内部转移到表面的距离较短,增大了载流子分离效率.另外,锌镉硫胶体量子点具有较负的导带位置、可调控的带隙、较好的水中分散性以及良好的光吸收等优点,因此锌镉硫胶体量子点从其他光催化剂中脱颖而出.本文分别采用热注法和传统共沉淀法制备了油溶性锌镉硫量子点和水溶性锌镉硫纳米颗粒.发现油溶性量子点亲水性能较差,几乎没有光催化活性,但油溶性量子点易通过配体交换过程转换成水溶性量子点,无机硫作为锌镉硫量子点的表面水溶性配体,可使量子点具有较好的亲水性.通过电化学测试、稳态荧光以及时间分辨荧光测试结果表明,相比于锌镉硫纳米颗粒,水溶性锌镉硫量子点具有更高的电子空穴分离效率.光催化产氢测试发现,在牺牲剂甘油存在的条件下,水溶性锌镉硫量子点的光催化产氢速率(1220μmol g^?1 h^?1)显著提高,约是锌镉硫纳米颗粒产氢速率的10倍.加入助催化剂Ni^2+后,锌镉硫量子点表现出最高的光催化产氢活性(2253μmol g^?1 h^?1),在420 nm灯的光照条件下,表观量子效率达到15.9%.光催化活性的增大主要归因于量子点较小的颗粒尺寸、表面无机硫配体以及助催化剂的添加,这些都有利于载流子的快速分离和转移,降低其复合,延长其寿命,并且加速了产氢动力学,因此提高了水溶性锌镉硫量子点的光催化产氢活性.     

玻璃掺杂固溶半导体（ZnxCd1—xS）荧光效应

采用溶胶－凝胶工艺，以硫脲作为Ｓ的来源，在多也ＳｉＯ２玻璃中原位生长固溶半导体（ＺｎｘＣｄ１－ｘＳ）。利用ＸＲＤ证实在多孔ＳｉＯ２玻璃中微晶的存在，并根据衍射图估计微晶尺寸小于１０ｎｍ。测量了材料的室温荧光光谱，分析表明在多孔ＳｉＯ２玻璃中微晶结构不是以ＺｎＳ·ＣｄＳ形式存在，而是以ＺｎｘＣｄ１－ｘＳ形式的因溶半导体存在。     

Synthesis and photoluminescence characteristics of (Sr, Ca)3B2O6:Eu for application in white light-emitting diodes

A series of yellow-green (Sr, Ca)₃B₂O₆:Eu phosphors have been synthesized using precursors prepared via a facile sol-gel route. The solid-solution phases crystallized to materials with the formula of Sr_3−x−yCa_xEu_yB₂O₆ with varied Ca²⁺ and Eu²⁺ contents. The emission peak centered at 540 nm under near-UV excitation exhibited a broad-band distribution in the range of 450-650 nm. The dependences of the luminescence intensity on the contents of Ca²⁺ substitution and Eu²⁺ dopant were also investigated. The composition in the host lattice sensitively affected the chromaticity index. Sr_1.21Ca_1.7Eu_0.09B₂O₆ (SCB:0.09Eu) was shown to possess the highest intensity and broadest emission band. Calcining temperature was shown to greatly influence the luminescent properties of SCB:0.09Eu. It is concluded that SCB:0.09Eu can be used as an efficient yellow-green phosphor for white light-emitting diodes (white LEDs) applications.