Synthesis and characterization of poly (linoleic acid)-g-poly(methyl methacrylate) graft copolymer with applying in Au/PLiMMA/n-Si diode

Poly (linoleic acid)-g-poly(methyl methacrylate) (PLiMMA) graft copolymer was synthesized and characterized. PLiMMA graft copolymer was synthesized from polymeric linoleic acid peroxide (PLina) possessing peroxide groups in the main chain by free radical polymerization of methyl methacrylate. Later, PLiMMA was characterized by proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) techniques. Furthermore, Au/PLiMMA/n-Si diode was fabricated for the purpose of investigating PLiMMA׳s conformity in diodes. The main electrical characteristics of this diode were investigated using experimental current–voltage (I–V) measurements in dark and at room temperature. Obtained results, such as sufficiently high rectifying ratio of 4.5×10⁴, indicate that PLiMMA is a promising organic material for electronic device applications.     

Fabrication of Schottky barrier MOSFETs using self-assembly CoSi2 nanopatterning and spacer gate technologies

A self-assembly patterning method for generation of epitaxial CoSi₂ nanostructures was used to fabricate 50 nm channel-length MOSFETs. The transistors have either a symmetric structure with Schottky source and drain or an asymmetric structure with n⁺-source and Schottky drain. The patterning technique is based on anisotropic diffusion of Co/Si atoms in a strain field during rapid thermal oxidation. The strain field is generated along the edges of a mask consisting of 20 nm SiO₂ and 300 nm Si₃N₄. During rapid thermal oxinitridation (RTON) of the masked silicide structure, a well-defined separation of the silicide layer forms along the edge of the mask. These highly uniform gaps define the channel region of the fabricated device. The separated silicide layers act as metal source and drain. A poly-Si spacer was used as the gate contact. The asymmetric transistor was fabricated by ion implantation into the unprotected CoSi₂ layer and a subsequent out-diffusion process to form the n⁺-source. I–V characteristics of both the symmetric and asymmetric transistor structures have been investigated.     

叠盖电极技术在SPRITE 探测器上的应用

文中主要介绍了叠盖电极技术在SPRITE探测器上的实际应用，并给出了具体实验结果。选择适当的叠盖电极尺寸可以使SPRITE的响应率Rυ提高一倍以上，探测率D^*普遍提高30％左右，高的可达80％。实验结果表明，叠盖电极技术明显地提高了SPRITE器件的性能，是一种简便的提高SPRITE性能的新途径。     

量子点器件的三端电测量研究

利用三端电测量方法，研究了调制掺杂二维电子气结构的量子点器件输运特性.报道了可分别测量二维电子气电阻和量子点隧穿电阻的实验方法.实验结果表明：量子点的横向耦合控制了量子点器件在小偏压下的电输运特性. 关键词： 自组装量子点 二维电子气 量子隧穿 肖特基接触     

Electronic transport properties of bismuth nanobridges through silicon-nitride membranes

The electronic transport through nanostructured bismuth nanobridges has been investigated at low temperatures (T<2 K) and in magnetic fields B up to 8.5 T. The samples show reproducible resistance fluctuations as a function of B, superimposed on a large magnetoresistance of up to 50%. In addition, time-dependent resistance fluctuations in zero magnetic field demonstrate the presence of bistable scatterers in the constriction region of our samples, which are described by two-level systems. Their dynamics are shown to be sensitive to subtle modifications of the static scatterer configuration in their vicinity, which cannot be detected in the sample magnetofingerprint.     

Labile Interactions Defined in Crystalline Metal Complexes

The problems involved in identifying and quantifying labile interactions considered to influence complex compound structures are highlighted through the assessment of four different families of metal complexes for which extensive crystallographic data are available. Modification of the charge distribution within a ligand molecule as a result of coordination is one factor with a number of ramifications. A detailed analysis of evidence for both intra- and inter-molecular attractions in dimethylsulfoxide complexes of metal perchlorates is used to provide a basis for the consideration of weak interactions between complex ions involving forces including phenyl-group attractions, hydrogen bonding and cavity inclusion.     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

On the role of the interface charge in non-ideal metal–semiconductor contacts

The bias dependent interface charge is considered as the origin of the observed non-ideality in current–voltage and capacitance–voltage characteristics. Using the simplified model for the interface electronic structure based on defects interacting with the continuum of interface states, the microscopic origin of empirical parameters describing the bias dependent interface charge function is investigated. The results show that in non-ideal metal–semiconductor contacts the interface charge function depends on the interface disorder parameter, density of defects, barrier pinning parameter and the effective gap center. The theoretical predictions are tested against several sets of published experimental data on bias dependent ideality factor and excess capacitance in various metal–semicoductor systems.     

Analysis of heterojunction resonant cavity-enhanced Schottky photodiodes by using two-valley transport model

The article concerns heterojunction resonant cavity-enhanced (RCE) Schottky photodiodes with GaAs in the absorption layer. The quantum efficiency and linear pulse response have thoroughly been analysed. For the first time, the response of a heterojunction photodiode has been modelled by the phenomenological model for a two-valley semiconductor. The results obtained have shown that the satellite valleys, as well as the parasitic time constant, significantly influence the response and, accordingly, have to be taken into account when analysing and optimizing RCE photodetectors.     

Anomalous capacitance of quantum well double-barrier diodes

The S-parameters of several different quantum well double barrier diodes have been measured. A technique has been developed for measuring whisker contacted diodes with and HP 8510B automatic network analyzer. Special coaxial mounts using K-connectors were designed to enable measurements up to 20 GHz. The voltage-dependent conductance and capacitance were derived from the measured reflection coefficient of each device. The C/V characteristics were observed to exhibit an anomalous increase at voltages corresponding the the negative differential resistance region (NDR). These are the first reported S-parameter measurements in the negative differential resistance region of quantum well double barrier diodes. A theory is presented that explains, in part, the observed results.