对撞增强型YAG相位共轭腔

降低SBS相位共轭腔的启动阈值以及如何提高输出光束的质量一直是人们关心的课题。报道了在YAG激光器上运行一种新型对撞增强型YAG受激布里渊散射相位共轭激光腔的输出特性。该腔具有较低的启动阈值和较高的输出能量;该腔型最高能输出150mJ的能量,输出脉宽最窄为11ns,光束发散角为1.3mrad,输出能量和光束质量都很优良。     

Glass transitions and mixed phases in block SBS

Differential scanning calorimetry (DSC) does not allow for easy determination of the glass‐transition temperature (T_g) of the polystyrene (PS) block in styrene–butadiene–styrene (SBS) block copolymers. Modulated DSC (MDSC), which deconvolutes the standard DSC signal into reversing and nonreversing signals, was used to determine the (T_g) of both the polybutadiene (PB) and PS blocks in SBS. The T_g of the PB block was sharp, at ?92 °C, but that for the PS blocks was extremely broad, from ?60 to 125 °C with a maximum at 68 °C because of blending with PB. PS blocks were found only to exist in a mixed PS–PB phase. This concurred with the results from dynamic mechanical analysis. Annealing did not allow for a segregation of the PS blocks into a pure phase, but allowed for the segregation of the mixed phase into two mixed phases, one that was PB‐rich and the other that was PS‐rich. It is concluded that three phases coexist in SBS: PB, PB‐rich, and PS‐rich phases. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 276–279, 2005     

激光与材料参数对瞬态SBS 诱导的激光超声破坏效果的影响

 通过数值求解一维瞬态受激布里渊散射（SBS）声光耦合波方程，从理论上分析了泵浦激光参数及光学材料参数对SBS过程发生阈值的影响。以SBS过程中建立起来的应力场抗拉（压）强度和散射场的反射率为判据，分析了激光脉宽及作用区域长度对激光超声破坏材料效果的影响，探讨了短脉冲激光（约ns）引起的激光超声对材料的破坏机理；讨论了通过参数配置有效遏制SBS过程激光超声对光学材料的破坏问题。     

光纤中的SBS反射率和波形研究

从理论和实验上研究了不同焦距下泵浦能量以及透镜与光纤间距对多模光纤中的SBS能量反射率和脉冲波形的影响。理论模拟采用一维瞬态SBS数值计算模型和边界噪声输入法，得到了SBS反射率和脉冲上升沿的变化规律。实验上采用1.06μm的YAG激光器和无掺杂多模阶跃石英光纤，测得了能量反射率和波形的变化规律，获得的最大反射率为69%，脉宽压缩比为3:1-2:1。计算结果与实验结果符合较好。     

主振-功放系统SBS位相共轭技术研究

利用单池与双池位相共轭池,对SBS位相共轭特性进行了研究,实现MOPA激光系统SBS位相共轭高反射率、高保真度、大能量高光束质量激光输出,为高功率激光器的发展提供了有效技术途径。     

Cr4+:YAG调Q的SBS激光器

对在SBS调Q的YAG激光器中加入Cr4+:YAG的情况进行了计算模拟和实验研究,证明两种被动调Q的适当结合,可明显地提高系统的稳定性。     

双通放大受激布里渊散射脉冲压缩

文章报道了利用双通放大结构进行受激布里渊散射（ＳＢＳ）脉冲压缩，实验获得了近极限压缩的脉冲，压缩率近１０倍。实验中同时观察到脉冲压缩中的相位跃变。相位跃变是受激背散射光与入射激光间的增益与损耗调制的结果。     

磺化SBS薄膜的制备与表征

采用化学磺化法对ＳＢＳ热塑性弹性体进行离子化，研究了不同磺化程度以及不同金属离子对磺化产物结构与性能的影响，发现离子化产物的动态模量、拉伸强度和伸长率均有明显提高，不同金属离子对离聚物性能影响不同。其中以Ｎｉ＾２＋中和的产物，离子基团间作用力强，产物力学性能最好。     

Novel Design of Laser with SBS Phase Conjugation Mirror

The beam quality of a single-rod Nd: YAG laser with wavelength of 1.06 m was improved almost up to the diffraction limit by using a phase-conjugating mirror (PCM) based on stimulated Brillouin scattering (SBS) with acetone as the SBS medium. The new start cavity, which is the concave-convex cavity operating near the limit of stability in the g diagram, and the phase conjugation cavity of the SBS oscillator were designed. The thermal lens of the material with focal lengths of less than 140 m at pump powers of 60 J was compensated by the PCM. The laser is Q-switched by the nonlinear reflectivity of the PCM and the system works with an average repetition rate of about 5 kHz and single Q-switch pulse showed a width of 10 ns. It is demonstrated that if the start cavity is fit for SBS and the SBS phase conjugation mirror can be optimized, the beam quality of solid laser can be surely enhanced because of this technology of nonlinear optics.     

利用SBS调Q的喇曼频移Nd:YAG激光器研究

对采用SBS调Q产生喇曼频移输出的激光器进行了理论分析,并对实验结果与染料调Q时的输出进行了对比,提出了改进该种激光器性能的方法。