基于LabWindows/CVI的某型飞机FBW飞行试验台设计与实现

主要阐述了某型飞机EBW飞行试验台的LabWindows／CVI实现。在分析EBW组成及信号交联关系的基础上，设计了PCI总线结构的系统硬件；提出了测试库与测试引擎相结合的编程方法，并着重阐述了测试引擎的实现方法。     

Thermal degradation of two liquid fuels and detonation tests for pulse detonation engine studies

The use of liquid fuels such as kerosene is of interest for the pulse detonation engine (PDE). Within this context, the aim of this work, which is a preliminary study, was to show the feasibility to initiate a detonation in air with liquid-fuel pyrolysis products, using energies and dimensions of test facility similars to those of PDEs. Therefore, two liquids fuels have been compared, JP10, which is a synthesis fuel generally used in the field of missile applications, and decane, which is one of the major components of standard kerosenes (F-34, Jet A1, ...). The thermal degradation of these fuels was studied with two pyrolysis processes, a batch reactor and a flow reactor. The temperatures varied from 600°C to 1,000°C and residence times for the batch reactor and the flow reactor were, respectively, between 10–30 s and 0.1–2 s. Subsequently, the detonability of synthetic gaseous mixtures, which was a schematisation of the decomposition state after the pyrolysis process, has been studied. The detonability study, regarding nitrogen dilution and equivalence ratio, was investigated in a 50 mm-diameter, 2.5 m-long detonation tube. These dimensions are compatible with applications in the aircraft industry and, more particularly, in PDEs. Therefore, JP10 and decane were compared to choose the best candidate for liquid-fuel PDE studies. This paper was based on work that was presented at the 20th International Colloquium on the Dynamics of Explosions and Reactive Systems, Montreal, Canada, July 31 – August 5, 2005.     

Geometrically qualified ESPI vibration analysis of an engine

This paper presents an application in the automotive industry where a combination of electronic speckle-pattern interferometry and laser doppler velocimetry were used at a critical stage in the design process of an internal combustion engine. Combined deformation and surface relief measurements were used to study the phase and amplitude of deformation of a vibrating engine. The relief data was combined with the interferometer geometry and used to geometrically correct the deformation data, in an effort to improve accuracy. The measurements allowed rapid identification and quantification of design weaknesses, particularly those causing undesirable resonances. This led to a significant reduction in the design time and lowering of costs, when compared with existing design optimisation methods.     

A Modified Szilard Engine: Measurement, Information, and Maxwell's Demon

Using an isolated measurement process, we calculate the effect measurement has on entropy for the multi-cylinder Szilard engine. We find that the system of cylinders possesses an entropy associated with cylinder total energy states, and that it records information transferred at measurement. Contrary to other's results, we find that the apparatus loses entropy due to measurement. The Second Law of Thermodynamics may be preserved if Maxwell's demon gains entropy moving the engine partition.     

Predicting vibration signals of automobile engine using chaos theory

Condition monitoring and life prediction of the vehicle engine is an important and urgent problem during the vehicle development process. The vibration signals that are closely associated with the engine running condition and its development trend are complex and nonlinear. The chaos theory is used to treat the nonlinear dynamical system recently. A novel chaos method in conjunction with SVD (singular value decomposition)denoising skill are used to predict the vibration time series. Two types of time series and their prediction errors are provided to illustrate the practical utility of the method.     

双组元姿控发动机反流特性的DSMC模拟

为准确获得双组元姿控发动机的羽流及其反流特性,采用直接模拟蒙特卡罗(DSMC)方法结合可变软球(VSS)模型数值模拟以N2O4/MMH为推进剂的真空羽流。喷口参数由喷管流动的DSMC法计算得到。与文献比较表明本文计算程序可信。模拟结果表明,分子质量越小的气体越容易进入反流区;本文的计算条件下,在偏离X轴正向116°~140°范围内,组分数密度和质量流率以及温度均出现了最大值。     

新型汽车发动机油用添加剂的研究进展

本文介绍了汽车发动机油用添加剂尤其是多功能添加剂的发展概况、作用机理、种类、结构及应用效果，并对未来润滑油添加剂的发展方向提供了一些参考，为我国润滑油品的高档化发展提出了几点想法。     

模糊控制理论在发动机温度控制中的应用

以模糊控制理论为基础，针对发动机温度控制中存在的非线性等问题，分析了当前发动机温度控制系统，并提出了发动机温度模糊控制方案。试验表明，采用模糊控制器后，显著改善了发动机温度自动控制的效果．     

Impact of Multi-Component Surrogates on the Performances,Pollutants, and Exergy of IC Engines

Even though there is a pressing interest in clean energy sources, compression ignition (CI) engines, also called diesel engines, will remain of great importance for transportation sectors as well as for power generation in stationary applications in the foreseeable future. In order to promote applications dealing with complex diesel alternative fuels by facilitating their integration in numerical simulation, this paper targets three objectives. First, generate novel diesel fuel surrogates with more than one component. Here, five surrogates are generated using an advanced chemistry solver and are compared against three mechanisms from the literature. Second, validate the suggested reaction mechanisms (RMs) with experimental data. For this purpose, an engine configuration, which features a reacting spray flow evolving in a direct-injection (DI), single-cylinder, and four-stroke motor, is used. The RNG k-Epsilon coupled to power-law combustion models is applied to describe the complex in-cylinder turbulent reacting flow, while the hybrid Eulerian-Lagrangian Kelvin Helmholtz-Rayleigh Taylor (KH-RT) spray model is employed to capture the spray breakup. Third, highlight the impact of these surrogate fuels on the combustion properties along with the exergy of the engine. The results include distribution of temperature, pressure, heat release rate (HRR), vapor penetration length, and exergy efficiency. The effect of the surrogates on pollutant formation (NOX, CO, CO2) is also highlighted. The fifth surrogate showed 47% exergy efficiency. The fourth surrogate agreed well with the maximum experimental pressure, which equaled 85 Mpa. The first, second, and third surrogates registered 400, 316, and 276 g/kg fuel, respectively, of the total CO mass fraction at the outlet. These quantities were relatively higher compared to the fourth and fifth RMs.     

基于自抗扰控制器的柴油机转速控制

当柴油机作为转速控制系统的被控对象时,是一个多变量强耦合非线性系统,采用经典PID控制难以得到满意的控制效果,但是自抗扰控制理论设计的控制器,能够提高调速系统的精度、准确度和柴油机的抗扰动能力。本文主要介绍了自抗扰控制技术(Active Disturbance Rejection Control Technique,ADRC),并且根据自抗扰控制技术设计了切实可行的自抗扰控制器,通过与PID控制的仿真比较,显示出自抗扰控制器对转速控制的较小超调量和较短调节时间,反应出良好的动态性能和稳态特性。