Al-pillared clays supported rare earths and palladium catalysts for deep oxidation of low concentration of benzene

Al-pillared clays supported rare earths (RE/Al-PILC) are prepared and used as supports of palladium catalysts for deep oxidation of low concentrations of benzene (130-160 ppm). The supports and catalysts are characterized by X-ray powder diffraction (XRD), FT-IR, BET, transmission electron microscopy (TEM) and temperature-programmed reduction (H₂-TPR). The results show that Al-pillaring results in a strong increase in the basal spacing (d_0 0 1) from about 1.2 to 1.8 nm, and an increase in the BET surface area from 63.6 (±3.2) to 238.8 (±11.9) m²/g. Activity tests of deep oxidation of low concentration benzene show catalysts supported on Al-PILC and RE/Al-PILC are obviously more active than that on raw clay. Pd/6% Ce/Al-PILC, in particular, can catalyze the complete oxidation of low concentration benzene at a temperature as low as about 290 °C.     

沉淀法制备CeO2超微粉末

采用过氧化氢－－氨水沉淀法在较低温度下制备ＣｅＯ２超微粉末。试验表明，溶液起始浓度及焙烧温度以形成粉素晶体粒径有一定影响。焙烧温度在２２０－８５０℃，所得ＣｅＯ２微粉均为立方晶系，透射电测试表明，粒子基本呈球形，晶体平均粒径随焙烧温度升高而增大。控制适当条件，可制得粒径范围在５－１３ｎｍ，比表面积１１１．８ｍ＾２／ｇ的ＣｅＯ２超微粉末。     

Al3Ti1B1RE细化剂对罐用铝材的细化效果及稀土的作用

采用XRD，OM，SEM，EDAX等探讨了一种新型Al3Ti1B1RE中间合金细化剂对罐用铝材的细化效果及RE的作用。结果表明，该细化剂对罐用铝材的细化效果优于进口和国产Al3Ti1B，且具有长效性，达6h后仍未见明显衰退，明显提高了该材料的强度和塑性；其细化效果及稳定性好的主要原因是：RE可降低铝液的表面能，增加铝液对细化核心(如TiAl3，TiB2)的润湿性，既充分发挥了异质形核作用，又防止了TiB2聚集沉淀倾向；RE也极易在结晶前沿富集造成成分过冷，阻碍了α-Al晶粒生长，并促进其在细化核心上形核；此外RE还兼有一定的净化、细化和变质作用，尤其是净化作用提高了该细化剂的冶金质量。     

微量稀土对超导稳定化基体铜材的性能和组织的影响

研究了微量稀土元素对铜的机械性能、导电性和组织的影响，在铜中加入微量钇、钕、镝、铒和富铈混合稀土后，使铜的抗拉强度有所提高，并保持良好的塑性和导电性。     

外推技术结合矩量法应用于二维介质柱RCS计算

基于Richardson外推(Extrapolation)提出了一种提高精度和快速计算任意二维介质柱体的雷达散射截面(RCS)外推技术和矩量法(MOM)相结合的方法(RE—MOM)。首先用二层粗细有序网格对介质柱体截面剖分。接着采用矩量法对相应二维介质柱体的电场积分方程求解，得到介质体在某一平面入射波照射下各自的电场向量，通过外推技术获得介质柱体在这一人射波照射下细网格上高精度的电场向量，进而计算出RCS。文中计算了几个例子，并与其他数值计算方法进行了比较，结果表明RE—MOM方法是正确和有效的。     

稀土在中国高新材料研制开发中的应用

我国在稀土资源和稀土原料的生产方面都居世界领先地位，近年来稀土高新材料的研制与开发也取得重大进展。本文概述了我国在稀土高新材料开发与研究方面的成果，指出今后应把稀土应用基础研究、中重稀土的应用研究和稀土在能源领域的应用研究作为重点进一步开展工作。     

NASICON-based H2 Sensor Using CoCrMnO4 Insensitive Reference Electrode and Buried Au Sensing Electrode

This work focuses on the H2 sensing performance of the sensor with buried Au sensing electrode and spi- nel-type oxide CoCrMnO4 insensitive reference electrode within sodium super ionic conductor（NASICON） film. The sensor showed the highest response to H2 gas on the insensitive material sintering at 800 ~C. Compared with those of the traditional structure device, the sensitivity and selectivity of the sensor using buried sensing electrode were greatly improved, giving a response of-177 mV in 9x10 5 g/L H2, which was about 3.5 times higher than that of sensors with traditional structure. Moreover, the AV value of the sensing device exhibited linear relationship to the logarithm of H2 concentration and the sensitivity（slope） was -135 mV/decade. A sensing mechanism related to the mixed potential was proposed for the present sensor.     

Microstructure, solderability, and growth of intermetallic compounds of Sn-Ag-Cu-RE lead-free solder alloys

The near-eutectic Sn-3.5 wt.% Ag-0.7 wt.% Cu (Sn-3.5Ag-0.7Cu) alloy was doped with rare earth (RE) elements of primarily Ce and La of 0.05–0.25 wt.% to form Sn-3.5Ag-0.7Cu-xRE solder alloys. The aim of this research was to investigate the effect of the addition of RE elements on the microstructure and solderability of this alloy. Sn-3.5Ag-0.7Cu-xRE solders were soldered on copper coupons. The thickness of the intermetallic layer (IML) formed between the solder and Cu substrate just after soldering, as well as after thermal aging at 170°C up to 1000 h, was investigated. It was found that, due to the addition of the RE elements, the size of the Sn grains was reduced. In particular, the addition of 0.1wt.%RE to the Sn-3.5Ag-0.7Cu solder improved the wetting behavior. Besides, the IML growth during thermal aging was inhibited.     

射频CO2激光用于轧辊毛化的实验研究

分析了轧辊材料在温度发生变化时对激光吸收系数的影响和毛化加工时各种工艺参数对毛化点的影响.针对Diamond K-50射频激励CO2激光器对轧辊毛化的实验,分析了激光脉冲宽度、重复频率以及毛化扫描速度等参数对毛化点的大小和椭圆度的影响,其中激光脉冲宽度与毛化点大小成线性关系,在脉宽为50～400μs时,毛化点椭圆短轴直径可达90～260μm,满足所需要的毛化加工要求.     

AUTOCAM简介及其初步使用的心得

一般来说,新闻直播中镜头是固定的,不需要太多的操作。如今,使用可远程遥控的摄像设备已成为一个热点。本文主要以东方卫视为例,从选型、使用及日常维护等方面,对对AUTOCAM的进行简单介绍。