Composite Silica Particles Using a Mixture of Organosilane Monomers

Composite silica particles were synthesized by a two-step (acid-base) process in an aqueous solution with a mixture of organoalkoxysilane monomers. The two-step process separates the hydrolysis and condensation procedures to easily control condensation rate. In this study, the silane monomers used were phenyltrimethoxysilane (PTMS), vinyltrimethoxysilane (VTMS), methyltrimethoxysilane (MTMS), and tetraethyl-orthosilicate (TEOS). The physical properties of the resultant composite particles were investigated with the change in the molar ratio of monomers. The size of the particles increased with increasing the molar ratio of R_aSi(OR)₃/R_bSi(OR)₃ or R_aSi(OR)₃/TEOS (R_a: phenyl; R_b: vinyl, methyl).     

高质量的一级光栅1．55μmDFB激光器

本文详细叙述了ＤＦＢ激光器的设计要点和新的工艺。采用一级全息光栅和二步液相外延法批量研制出高稳定单纵模工作的１．５５μｍ分布反馈激光器（ＤＦＢ—ＬＤ）。外延片成品率＞４０％。器件特性：２５℃时阈值电流２０ｍＡ，单面光功率＞１０ｍｗ，主边模抑制比ＳＭＳＲ达４３ｄＢ（λ／４相移光栅），谱线宽度△ν－２０ｄＢ＝０．３ｎｍ，调制速率＞１．８ＧＨｚ。可靠性测试显示：高温监测光谱稳定，２５°Ｃ时阈值退化率△Ｉｔｈ／ｔ＜０．３ｍＡ／ｋｈ，对应器件预估寿命将超过１０万ｈ。     

LiF晶体中F+,/sup>2色心在室温下的激光运转及可调谐输出

本文把纯LiF晶体中色心激光宽带输出的转换效率提高到11%，得到了心激光的宽带输出与温度的变化曲线。实现了色心激光的波长从0.86～1.02 μm的可调谐输出，并对泵浦光作用下LiF晶体中的各种色心动力学机制进行了分析。     

一类求解奇异延迟微分方程的两步连续Runge-Kutta方法的收敛性

本文给出了一类求解延迟落在当前积分步内延迟微分方程的两步连续Runge-Kutta方法。在一定条件下我们证明了方法收敛性,数值试验表明方法是有效的。     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

Cathodic materials for lithium-ion batteries based on spinels Li x Mn2−y Me y O4: Synthesis, phase composition, and structure of Li x Mn2−y Cr y O4 at x = 1.0−1.2 and y = 0−0.5

Extralithiated chromium-doped finely divided lithium-manganese spinels are synthesized as a result of a two-step solid-phase process with use made of the fusion-saturation method. The spinels are intended for application as cathodic materials in lithium-ion batteries. The phase composition and structural characteristics of samples of cathodic materials of the type Li _x Mn_2?y Cr _y O₄ are studied. The samples with x = 1.0?1.2 and y = 0?0.5 are characterized by phase purity and cubic syngony with parameter a = 0.817?0.823 nm and a disperseness equal to 1–2 nm. The maximum content of chromium and lithium in Li _x Mn_2?y Cr _y O₄ that does not lead to violation of cubic syngony is determined. Lithium excess in the cathodic material that does not exceed 0.2 formula units may be used for compensating the irreversible capacity. Replacing some manganese atoms by chromium may facilitate retention of the structures’s integrity in the course of cycling.     

TiO2-双亲共聚物复合纳米粒子的合成与紫外光敏特性

用偶联剂乙烯基三乙氧基硅烷改性纳米粒子TiO₂, 应用超声技术将TiO₂ 纳米粒子分散在甲醇介质中, 然后用苯乙烯(ST)原位聚合包封, 再用丙烯酰胺或乙烯基吡咯烷酮(VP)共聚, 两步原位分散聚合得到了有机聚合物为壳、TiO₂为核的有机/无机复合粒子. 用红外光谱、紫外-可见光谱、透射电子显微镜等检测手段进行表征. 结果显示: 由于双亲共聚物对TiO₂纳米粒子的敏化作用, 紫外-可见光谱图上两种纳米复合粒子的最大吸收峰均有明显红移, 并且吸收光谱的范围扩大了, 其中尤以TiO₂/(PST-co-PVP)为甚. 意味着光敏化活性的提高, 特别是在可见光谱的范围内. 这种情形对宽带隙半导体材料如TiO₂纳米粒子的光催化特性是有利的, 表明这类材料的应用空间得到了拓展.     

MASH ΣΔ modulators with a noise-shaped two-step ADC in the second stage

In this paper, a multi-stage noise-shaping (MASH) sigma-delta (ΣΔ) modulator is proposed to be used in low oversampling ratio (OSR) applications. It utilizes a noise-shaped two-step (NSTS) analog-to-digital converter (ADC) in the second stage and benefits its inter-stage gain to provide an extra attenuation of the quantization noise such that the same specifications of a traditional modulator are achieved but with a lower order of noise-shaping. Furthermore, large number of bits is resolved in the second stage while equal number of comparators is used. Compared to the single-loop NSTS ADC, in the proposed structure, the complexity problem of the feedback path and coefficient spreading are eliminated. As an example, a MASH 2-1 sigma-delta modulator has been designed and simulated in a 90 nm CMOS process using Spectre. The achieved resolution is 13.44 effective number of bits in 6.25 MHz signal bandwidth while consuming 19.6 mW power from a single 1 V supply. The sampling frequency is 100 MHz and the simulated figure of merit is 141 fJ/conv-step which shows the efficiency of the proposed modulator.     

基于蓝宝石纳米图形衬底上氮化镓生长的研究

利用两步生长法在蓝宝石纳米图形衬底（NPSS）上生长得到高质量的氮化镓薄膜。通过XRD和SEM对薄膜质量的表征和研究发现,为得到高质量的氮化镓（GaN）薄膜,在NPSS上生长时得到的最优缓冲层厚度为15nm,而在微米级尺寸的图形衬底（MPSS）上得到的最优缓冲层厚度远大于15nm。同时,在NPSS上生长氮化镓薄膜的过程中观察到一个有趣的现象,即GaN在NPSS上生长的初始阶段,氮化镓晶粒主要在图形之间的平面区域生长,极少量的GaN在衬底图形的侧面上聚集生长。这一有趣的现象明显不同于GaN在MPSS上的生长过程。接着,又在NPSS上生长了GaN基LED结构,并对其光电性能进行了研究。     

NiuPt1-uSivGe1-v/Si0.72Ge0.28界面形貌的改善

针对锗硅在形成金属锗硅化物时存在部分应力释放、界面形貌特性变差的问题,提出了在Si0.72Ge0.28上分别外延薄硅(Si)覆盖层和锗硅(Si072Ge0.28)缓冲层的工艺方案.实验结果表明,通过两步快速热退火,两个方案的工艺条件都能形成低阻的NiuPt1-uSitGe1-v和改善NivPt1-uSitGe./Si0.72Ge0.28的界面形貌.但相比较而言,在Si0.72Ge0.28上外延10 nm Si覆盖层的方案能够形成更好的NiuPt1-uSivGe1-t/Si0.72Ge0.28界面形貌.与没有改进的方案相比,该方案形成的肖特基接触更具有更低的肖特基接触势垒高度,更易形成欧姆接触.