探针馈电圆柱共形微带天线阻抗特性的FDTD法分析

将圆柱坐标系下非分裂式理想匹配层吸收边界条件(UPML)引入到圆柱共形微带天线的全波分析中，并给出了其中的场量迭代方程，明显地减小了计算空间，简化了编程；提出了圆柱坐标系下考虑有限尺寸探针半径的新算法，使得计算结果更加精确；应用GPOF方法预估了时域晚时响应，使计算时间减少了70％～90％。本文给出的模型能够对任意多层圆柱共形结构的微带天线进行计算，因此对此类天线的CAD设计具有实际意义。     

一种宽带矢量调制器的设计及其应用

矢量调制器是一种可以同时控制微波信号幅度和相位的器件。本文介绍了一种基于新型微带定向耦合器的宽带矢量调制器。新的耦合器结构克服了传统微带耦合器耦合度低、方向性差的问题,也不需要Lange耦合器复杂的加工工艺,在平衡放大器、移相器和衰减器等场合具有广泛的应用。其次,研究了用串联电感对衰减器中PIN二极管的寄生参数进行补偿的一种简单方法,以改善衰减器衰减量变化时的相位性能。该方法原理简单,可在一定带宽内替代复杂的平衡结构,并给出相近的性能。最后给出了矢量调制器的测试结果和它在自适应天线阵等实际系统中的应用情况,并讨论了用于提高载波和边带抑制、满足高精度要求的校准方法。     

共面波导(CPW)馈电单极子天线的设计与研究

给出一种工作于900MHz的共面波导(CPW)馈电单极子天线的设计。该单极子天线以共面波导的中心导带为辐射单极子，以中心导带两边的金属导体作反射板，结构简单紧凑。但是由于天线与共面波导之间缺少有效的隔离，造成天线性能受共面波导尺寸的影响较严重。本文通过模拟计算和实验测量详细分析了共面波导尺寸的变化对天线性能的影响，给出了结合共面波导尺寸设计的工作在900MHz的单极子天线结构数据。     

Hybrid Electrodes Used in Polymer Electro-Optic Modulator with Ultra-Broadband

Hybrid electrode combined coplanar waveguide (CPW) and microstrip lines in ultra-broadband electro-optic modulators. The characteristics of the modulators with hybrid electrode is like that of the modulator with the microstrip lines, in which the microstrip electrode is loaded above only one arm of Mach-Zehnder (M-Z) optical waveguide, besides the problem of microstrip line to coaxial transition and corona polarization in polymer modulators have been best solved at the same time. By using finite element method (FEM), the characteristic parameters such as half-wave voltage, modulation bandwidth characteristic impedance, effective microwave refractive index of polymer modulators with microstrip line and hybrid electrode are analysed and compared in this paper. The results present that velocity match, impendence match and lower microwave propagating loss is easily realized in modulators with hybrid electrode.     

Experimental modelling of high frequency circuits at low audio frequencies part I

At microwave frequencies, frequent use is made in circuit design of the electrical properties of short lengths of resistively terminated transmission line. It will be shown in the following contribution that circuits based on high frequency distributed lines can usefully be modelled at low audio frequencies using lumped element lines.     

一种新型微带光子带隙结构的优化设计

本文对一种渐变尺寸的新型光子带隙结构进行了优化设计。根据优化后得出的最优结构参数 ,设计出PBG结构。实验结果证明 ,这种优化后的新型结构可以在保持阻带抑制幅度的同时减小通带内的波纹     

固定频率波束可调的多端口微带漏波天线

提出了一种崭新结构的多端口馈电微带漏波天线 ,实现了频率固定下的电控天线主波束逐级可调。在工作频率固定的情况下 ,通过控制双端口馈电微带天线上的中部馈电端口位置 ,使微带漏波天线主波束方向发生偏移。仿真结果表明 ,当工作频率固定为 7GHz的情况下 ,在H平面上 ,主波束扫描范围可以达到约 48°～ 88°。     

Broadband Analysis of Holographic Power Combining Circuits

Holography is a promising technique for power combining applications in the frequency range of short millimeter and submillimeter waves. In this paper, quasi-optical holographic power combining circuits are investigated. An equivalent network is utilized which rigorously models horn arrays and biperiodic dielectric structures in order to design computer-generated holograms. We apply the network model to a 5-element quasi-optical power combiner and demonstrate its capability. The hologram is designed for 150 GHz and has an efficiency of 92.5 % with a 90 % bandwidth of 5.3 %. With the aid of a broadband waveguide power divider and a vector field measurement system, the circuit is analyzed.     

微带天线RCS缩减技术及分析方法

分析了微带天线ＲＣＳ（雷达散射截面）缩减的物理机制，对典型的ＲＣＳ缩减技术进行了综述，评论了几种计算微带天线ＲＣＳ的理论方法，指出了微带天线ＲＣＳ研究中值得探索的若干问题。     

The sinuous antenna-A dual polarized feed for reflector-based searching systems

The sinuous antennas have a numerous applications in military and civil systems such as direction finding systems and reflector feeds due to their superior broadband characteristics and simultaneous polarization capability. In this paper, design, construction and measurements of planar sinuous antennas are investigated for 1–5 GHz frequency range. Feeding sections of this antenna are realized by using microstrip tapered baluns. We have determined the microstrip tapered balun dimensions using Ansoft HFSS-simulation program. The performances of the manufactured antenna are measured using HP vector network analyzer. Polarization patterns and return loss characteristics of the designed antenna that have been measured in anechoic chamber, are presented.