Windows2000环境下实时控制系统的软件实现

文章介绍了在windows2000环境下通过编写WDM（Windows Driver Model）设备驱动程序实现实时数据采集和控制的一种方法。采用研华数据采集卡PCL818L产生中断信号．通过编写WDM驱动程序实现了在windows2000环境下转台的位置控制。并在实验中调试通过。实验结果表明：在采样频率为1KHz的情况下。控制系统很好实现了输出对输入的跟踪，证明了采用方法的正确性。该方法解决了windows2000环境下的实时性问题，为在windows环境下实时控制系统的实现提供了有益的尝试。     

纳米光电子器件的最新进展及发展趋势

主要介绍了纳米光电子学的基本概念、发展模式以及纳米光电子器件的最新进展和发展趋势。     

可编程模拟器件与技术新进展

简述可编程模拟器件的基本原理、典型应用和开发方法,介绍并比较主要的模拟可编程实现技术与主流器件系列,指出现存的主要问题并展望其未来发展方向.     

NMOS器件两次沟道注入杂质分布和阈电压计算

分别考虑了深浅两次沟道区注入杂质在氧化扩散过程中对表面浓度的贡献。对两次注入杂质的扩散分别提取了扩散系数的氧化增强系数、氧化衰减系数和有效杂地系数，给出了表面浓度与工艺参数之间的模拟关系式，以峰值浓度为强反型条件计算了开启电压，文章还给出了开启电压、氧化条件、不同注入组合之间的关系式。     

荧光显示管直丝氧化物阴极有效逸出功的计算

阴极的逸出功是表征阴极发射能力的物理量，求定荧光显示管直丝氧化物阴极有效逸出功时，因其零场发射电流密度难于准确取值，温度无法直接测量，显得困难，须予解决，为此提出了一种计算阴极有产逸出功的办法，对某显示管的发射欠佳和“低温高效”的两种氧化物阴极的有效逸出功进行计算，有效逸出功率是靠测量相关物理量再同计算得出，精度不很高，文中所用办法也不例外，但所得结果能反映阴极发射能力，所需仪器少，是实用方法。     

深亚微米MOSFET衬底电流的模拟与分析

利用器件模拟手段对深亚微米ＭＯＳＦＥＴ的衬底电流进行了研究和分析，给出了有效的道长度，栅氧厚度，源漏结深，衬底掺杂浓度以及电源电压对深亚微米ＭＯＳＦＥＴ衬底电流的影响，发现电源电压对深亚微米ＭＯＳＦＥＴ的衬底电流有着强烈的影响，热载流子效应随电源电压的降低而迅速减小，当电源电压降低到一定程度时，热载流子效应不再成为影响深亚微米ＭＯＳ电路可靠性的主要问题。     

Mixed Mode VLSI Implementation of a Neural Associative Memory

A mixed mode digital/analog special purpose VLSI hardware implementation of an associative memory with neural architecture is presented. The memory concept is based on a matrix architecture with binary storage elements holding the connection weights. To enhance the processing speed analog circuit techniques are applied to implement the algorithm for the association. To keep the memory density as high as possible two design strategies are considered. First, the number of transistors per storage element is kept to a minimum. In this paper a circuit technique that uses a single 6-transistor cell for weight storage and analog signal processing is proposed. Second, the device precision has been chosen to a moderate level to save area as much as possible. Since device mismatch limits the performance of analog circuits, the impact of device precision on the circuit performance is explicitly discussed. It is shown that the device precision limits the number of rows activated in parallel. Since the input vector as well as the output vector are considered to be sparsely coded it is concluded, that even for large matrices the proposed circuit technique is appropriate and ultra large scale integration with a large number of connection weights is feasible.     

Hybrid numerical—experimental approach for investigation of dynamics of microcantilever relay system

The time average holography measurements of the vibrating microelectromechanical switch (MEMS) were performed in this study. Experimental measurement results exhibit good agreement with computer generated holographic interferogram analysis. The validation of experimental investigations versus numerical analysis provides the necessary background to analyze the dynamical characteristics of micromechanical systems in virtual numerical environments. Direct application of fringe counting techniques for reconstruction of motion from time average holograms cannot be straightforward if the analyzed micromechanical systems contain motion limiters. Modifications of a classical time average holographic technique enable qualitative analysis of MEMS and can be applied for investigation of dynamical properties of much broader classes of MEMS systems.     

计算机辅助电子线路实验的思考与探索

本文介绍了EltctronicWorkbench软件和计算机虚拟仪器系统，采用计算机模拟仿真技术对电子线路实验加以辅助设计和探索。     

纳米技术的研究现状与将来

纳米科学技术将成为２１世纪最重要的高技术之一。纳米技术的最终目标是直接操纵单个原子和分子，制造量子功能器件，从而开拓人类崭新的生产生活模式。文章评述利用电子束、离子束的精细技术和ＳＴＭ原子操纵技术的研究现状，介绍原子层蚀刻，单层抗蚀剂自形成蚀刻，纳米自然蚀刻和电子束全息纳米蚀刻等高技术前沿动态，展望纳米技术的发展前景。