Monte Carlo simulation of electric conductivity for pure and doping fullerene (C60)

In this paper, we have used Monte Carlo (MC) method to simulate and study the temperature and doping effects on the electric conductivity of fullerene (C60). The results show that the band gap has reduced by the doping and the charge carrier transport is facilitated from valence band to conduction band by the temperature where is touched a 300 K. In this case, the conductivity reached a value of $4\times {10}^{-7}\text{S}{\text{cm}}^{-1}$. The electric conductivity of C60 can increase by the triphenylmethane dye crystal violet (CV) alkali metal to reach $4\times {10}^{-3}\text{S}{\text{cm}}^{-1}$ at 303 K. Our results of MC simulation have a good agreement with those extracted from literature [10], [33].     

AMBE-1000声码器接口电路设计方法

DVSI公司的AMBE-1000声码器芯片是一款高性能的全双工、实时语音压缩编解码芯片,可以应用于卫星通信、保密通信、视频会议等领域.文中简要介绍AMBE-1000声码器的A/D-D/A接口以及信道接口的工作原理;结合实例分别给出了AMBE-1000声码器与PCM编解码器MC14LC5480的A/D-D/A接口电路、与单片机AT89C51的信道接口电路的设计方法;最后指出了电路设计中应该注意的问题.     

MC68HC908QT4单片机键盘模块原理及应用

本文分析了MC68HC908QT4单片机键盘模块的结构原理和寄存器功能，结合其键盘模块的特点，给出了具体的键盘应用实例。     

An externally cooled beetle type scanning tunneling microscope for imaging in cryogenic liquids

We describe a variable temperature cryogenic scanning tunneling microscope designed for imaging and research in cryogenic liquids. It has an external Dewar type large scale cooling system with a temperature control range of roughly 85-110 K using pressure controlled liquid nitrogen cooling. The liquid nitrogen is kept in a closed chamber surrounding the STM and maintained at a pressure to suit the chosen temperature. Several gases have triple points in this temperature range and can therefore be liquified, such as argon, methane, silane and germane. The STM is based on a beetle type design built into a small cube vacuum chamber to fit into the cooling dewar. The system has been used for atomic resolution of highly oriented graphite submerged in a methane liquid at a temperature of 100 K.     

含喹噁啉环的化合物改性聚己内酰胺

合成了14种由三种含喹(哑心)啉环的芳香化合物改性的聚己内酰胺(MC尼龙),并对其形态、抗冲击强度、吸水性及熔融行为等进行了表征。聚苯基单醚喹(哑心)啉(PPQ)单模型化合物对MC尼龙结晶部分几乎没有影响。少量(0.005—5.0％)吩嗪的引入使MC尼龙的颜色、形态及性能等发生巨大变化,改性体系被认为是氢键相互作用,PPQ双模型化合物的改性作用介于二者之间。     

Quantitative surface analysis by Auger and x-ray photoelectron spectroscopy

Recent developments in quantitative surface analysis by Auger (AES) and x-ray photoelectron (XPS) spectroscopies are reviewed and problems relating to a more accurate quantitative interpretation of AES/XPS experimental data are discussed. Special attention is paid to consideration of elementary physical processes involved and influence of multiple scattering effects on signal line intensities. In particular, the major features of core-shell ionization by electron impact, Auger transitions and photoionization are considered qualitatively and rigorous approaches used to calculate the respective transition probabilities are analysed. It is shown that, in amorphous and polycrystalline targets, incoherent scattering of primary and signal Auger and photoelectrons can be described by solving analytically a kinetic equation with appropriate boundary conditions. The analytical results for the angular and energy distribution, the mean escape depth, and the escape probability as a function of depth of origin of signal electrons as well as that for the backscattering factor in AES are in good agreement with the corresponding Mote Carlo simulation data. Methods for inelastic background subtraction, surface composition determination and depth-profile reconstructions by angle-resolved AES/XPS are discussed. Examples of novel techniques based on x-ray induced photoemission are considered.     

MONTE CARLO SIMULATION OF TRIBLOCK COPOLYMER/HOMOPOLYMER BLEND FILMS

1. INTRODUCTION The extensive applications of block copolymer have been studied in detail due to their special molecular architecture and characteristic [1,2]. Recently, many studies including theoretical analysis and experimental techniques have addressed the polymer blend system of diblock copolymer/homopolymer [3~9]. An early investigation presented a quantitative analysis of homopolymer distributions in well-ordered copolymer microdomains through mixing polystyrene (PS) or poly methyl…     

基于80C196MC的单极性SPWM的实现

研究了利用80C196MC单片机的波形发生器和一定的外围电路产生单极性SPWM(正弦脉宽调制)信号的方法。利用IR2130驱动器作为栅极驱动器,驱动用IGBT(绝缘栅双极晶体管)组成的单相H桥。对比了单极性SPWM相对于双极性SPWM的优点,阐述了其实现的基本原理,给出了具体的主电路和控制电路及程序实现的流程,分析了IR2130应用中的具体问题,最后给出了一种简单的减小过零点失真的方法。     

带有USB的DTU设计

为了实现采用GPRS(通用分组无线电业务)网进行远距离数据传输,采用Cygnal公司的带有USB(通用串行总线)接口的8051F320单片机和西门子公司的GPRS模块MC35研发出一款带有USB接口的DTU(数据终端单元),该款带有USB接口的DTU实现了远距离数据处理和手法数据的功能。文中提供了硬件和软件部分(底层固件和PC机前台软件)的设计方案。     

明胶改性聚醚醚酮微载体的制备、表征及性能

微载体因其具有较高的表面积/体积比等优点可以大大提高哺乳动物细胞培养效率,被广泛应用于生物制药和组织工程等领域。 但微载体多为一次性使用,不耐高温,且主要依赖进口,价格昂贵,因而限制了其国内的应用和推广。 聚醚醚酮(PEEK)材料具有良好的生物相容性、化学稳定性及耐高温等特性,是一种优异的微载体材料,但存在熔点高,加工方法单一和生物惰性等缺陷。 本文以浓硫酸为溶剂,乙醇溶液为萃取剂,采用气流辅助滴注/相分离法,将PEEK制备成448 μm左右,尺寸均匀的微球;经氨丙基三乙氧基硅烷(APTES)处理,获得表面氨基化修饰的PEEK微球(PEEK-N);进一步,以N,N'-羰基二咪唑(CDI)为活性中间体,将明胶分子接枝到PEEK-N微球表面,获得表面明胶修饰的PEEK微载体(PEEK-G)。 对材料的物理化学性质、表面接枝量进行表征;并通过体外细胞实验评估其细胞毒性、细胞粘附效率和细胞增殖能力。 结果显示,通过该方法制备成功了3种不同明胶接枝含量的PEEK细胞微载体(PEEK-G1,PEEK-G2,PEEK-G3),其中明胶含量较高的PEEK-G3毒性最低,细胞粘附和增殖效果最理想。