基于LotusNotes的文档ID应用剖析

介绍了文档数据库Lotus Domino／Notes的特点．对其文档处理的核心，即Notes文档的ID构成机制作了系统剖析．并在此基础上分析了如何在文档复制中运用ID的不同组件以及如何运用API程序访问文档ID等。     

Comparison of sample preparation methods combined with gas chromatography with electron‐capture detection for the analysis of multipesticide residues in lotus seeds

Sample preparation is always the major bottleneck in analytical chemistry for the determination of pesticide residues. Different sample preparation methods have been proposed due to the wide variety of pesticides used and the inherent complexity of the matrices. In this study, different sample preparation methods including SPE, matrix solid‐phase dispersion, the quick, easy, cheap, efficient, rugged, and safe method, and a one‐step completion method were compared and evaluated for extracting pesticides from lotus seeds. Analysis was carried out using GC with electron‐capture detection. The results showed that good recoveries for tested pesticides were obtained by using Florisil in the four methods, and the extraction efficiency of the one‐step completion method was superior to the other three methods. The one‐step completion method was confirmed to have good linearity, reproducibility, stability, and recovery for the detection of 36 pesticides in lotus seed samples. The data collected from this study are expected to prove useful in regulating the concentration of the residues in lotus seeds, as well as in protecting human health from the hazards posed by these residues.     

莲子蛋白组分二级结构的研究

对莲子蛋白质进行了Osborne蛋白质分类。采用傅里叶变换红外光谱(FTIR)对清蛋白、球蛋白、醇溶蛋白和谷蛋白进行二级结构分析。应用去卷积和曲线拟合方法对四种蛋白组分的酰胺Ⅰ和Ⅲ带进行分析,清蛋白和球蛋白之间以及醇溶蛋白和谷蛋白之间各相应子峰峰位和二级结构峰面积百分比差异较小,但前两者各相应子峰峰位与后两者略有差异;而前两者各相应二级结构峰面积百分比与后两者有较大差异,特别是前两者的各相应有序结构(α-螺旋+β-折叠)峰面积的百分比明显大于后两者。用0.1 mol.L-1NaCl溶液提取的球蛋白和清蛋白有序结构含量均在55%左右,而醇或碱提的醇溶蛋白和谷蛋白的有序结构含量仅为40%左右,盐提的蛋白质二级结构有序性和稳定性更高。     

Portal门户技术在办公系统中的应用

介绍利用Websphere平台单点登录办公系统的原理;使用门户系统集成办公自动化等多个系统的结构;简要介绍办公系统从传统的客户端模式转向基于浏览器模式的过程.     

第三代办公自动化系统安全设计与实现研究

从办公自动化入手,介绍了LotusNotes这个优秀软件,分析了第三代OA系统实现研究的基本内容、关键技术和难点,最后着重研究了它的安全设计实现。     

FAAS测定嫩、老荷叶中7种营养元素含量

采用火焰原子吸收光谱法对嫩、老(成熟)荷叶中K、Ca、Mg、Mn、Fe、Zn、Cu7种营养元素的含量进行测定。结果表明,嫩、老荷叶中7种营养元素含量高低顺序一致,依次为KCaMgMnFeZnCu,但成熟荷叶中钙、锰含量明显高于嫩荷叶,约为嫩荷叶的两倍,铁含量稍高于嫩荷叶,钾、镁、锌、铜含量略低于嫩荷叶。其中成熟荷叶中锰的含量为738.04μg.g-1,比一般中药高出近20倍,荷叶的多种药用价值可能与富含微量元素锰有密切关系。     

A Coating that Combines Lotus‐Effect and Contact‐Active Antimicrobial Properties on Silicone

The antimicrobial equipment of materials is of great importance in medicine but also in daily life. A challenge is the antimicrobial modification of hydrophobic surfaces without increasing their low surface energy. This is particularly important for silicone‐based materials. Because most antimicrobial surface modifications render the materials more hydrophilic, methods are needed to achieve antimicrobial activity without changing the high water‐contact‐angle. This is achieved in the present work, where SiO₂ nanoparticles are prepared and functionalized with 3‐(trimethoxysilyl)‐propyldimethyloctadecyl ammonium chloride (QAS) in a one‐pot synthesis. The modified nanoparticles are applied onto a silicone surface from suspension with no need of elaborate pretreatment. The resulting surface exhibits a Lotus‐Effect combined with contact‐active antimicrobial properties. The particle surfaces show self‐organizing micro‐ and nanostructures that afford a water‐contact angle of 144° and a hysteresis below 10°. The particles are self‐adhering on the silicone after solvent evaporation and resistant against immersion into and washing with water for at least 5 d. Thereby, the adhesion of the bacterial strain Staphylococcus aureus to these surfaces is reduced and the remaining bacterial cells are killed within 16 h. This is the first example of a Lotus‐Effect surface with intrinsic contact‐active antimicrobial properties.     

莲藕中酚类物质的提取分析及酶促褐变底物的研究

用TLC和HPLC法分析了莲藕中提取的酚类物质。莲藕中含有多巴、儿茶酚、没食子酸、D-( )-儿茶素和L-(-)-表儿茶素。对莲藕中多酚氧化酶(PPO)的特性进行研究,结果表明：莲藕中PPO的最适酚类底物为没食子酸。     

Processing tactics for low-cost production of pure nuciferine from lotus leaf

Nuciferine is an important drug candidate for the treatment of many diseases. However, there is no general method for its low - cost production. In this work, a feasible method for the production of nuciferine from lotus leaf, using ultrasonic-assisted extraction-solid phase extraction (UAE-SPE) as extraction and cleanup procedure, was developed. Petroleum ether and silica gel have been successfully used as extraction solvent and adsorbent to integrate UAE with SPE, respectively. Except for filtration, no treatment (e.g. concentration and redissolution, etc) was needed on UAE extract before SPE and the effluents obtained in the loading process of SPE could be used as UAE extraction solvent without purification. No obvious decline in the extraction efficiency of UAE and adsorption capacity of SPE was observed at least for 5 runs, which provides a feasible way for the continuous production of nuciferine in industry, i.e. Cyclic UAE-SPE. Moreover, SPE column could be conveniently regenerated and reused without significant decline in its adsorption capacity at least for 5 cycles, which can be used to reduce the cost of the whole system further. In comparison with other cleanup procedures, Cyclic UAE-SPE showed apparent advantages in energy conservation and emission reduction. LLE and crystallization were applied to separate nuciferine from other impurities further. Under optimum conditions, the total recovery rate of nuciferine with a purity over 90.0% from lotus leaf reached 50.1%. All in all, the developed method has advantages in convenient operation, low cost, and high efficiency, thus, is fitting for the production of high purity nuciferine.     

Contents of heavy metals in lotus seed from REEs mining area

At rare earth mining area, the pollution of heavy metals has been paid little attention. In lotus seeds and soil samples sampled from a typical rare earth elements mining area were detected the contents of eight kinds of heavy metals (Cr, Mn, Cu, Zn, As, Cd, Hg and Pb) to investigate the pollution from rare earth elements mining by ICP-MS (Inductively Coupled Plasma Mass Spectrometry). The results showed that the contents of the heavy metals Cr, Mn, Cu, Zn, As, Cd, Hg and Pb in lotus seeds were 0.25, 86.94, 8.32, 19.76, 0.13, 0.08, 0.01, and 0.20 μg/g in lotus seeds, respectively, and corresponding contents in soil were 27.68, 168.71, 20.23, 47.16, 1.83, 0.13, 0.04, and 23.15 μg/g. These data showed that the contents of heavy metals in lotus seeds from REEs mining area are no higher than reference area and meet national food safety standards of China.