微流控分析芯片制作中的低温键合技术

微流控分析芯片制作方法的研究是微流控分析的基础。制作性能良好的微流控分析芯片时,基片与盖片的键合技术十分重要。本文针对近年来发展迅速的低温键合技术,对各种方法进行了评价,并对其发展前景进行了展望。     

浅谈集成电路的废气处理

集成电路的工业废气有含氟化物、硫酸雾的酸性废气,含氨的碱性废气,含异丙醇、光刻胶的有机废气,含SiO_2的含尘废气,以及含硅烷、磷烷的工艺尾气等,这些工业废气中大部分成分是有毒有害的,必须进行有效的处理才能排入大气中。主要讨论上述工业废气的分类、处理方式、应用范围及应用实例等。     

Strategic commitment to price to stimulate downstream innovation in a supply chain

It is generally in a firm’s interest for its supply chain partners to invest in innovations. To the extent that these innovations either reduce the partners’ variable costs or stimulate demand for the end product, they will tend to lead to higher levels of output for all of the firms in the chain. However, in response to the innovations of its partners, a firm may have an incentive to opportunistically increase its own prices. The possibility of such opportunistic behavior creates a hold-up problem that leads supply chain partners to underinvest in innovation. Clearly, this hold-up problem could be eliminated by a pre-commitment to price. However, by making an advance commitment to price, a firm sacrifices an important means of responding to demand uncertainty. In this paper we examine the trade-off that is faced when a firm’s channel partner has opportunities to invest in either cost reduction or quality improvement, i.e. demand enhancement. Should it commit to a price in order to encourage innovation, or should it remain flexible in order to respond to demand uncertainty. We discuss several simple wholesale pricing mechanisms with respect to this trade-off.     

工业用水中总铁含量的快速测定

介绍了以菲咯嗪－醋酸钠－醋酸缓冲溶液为显色体系、用自制的铁含量比色测定仪快速测定工业用水中总铁含量的方法。总铁含量≤０５ｍｇ／Ｌ时，标准偏差≤００３ｍｇ／Ｌ；总铁含量＞０５ｍｇ／Ｌ时，相对标准偏差≤５％。单次测定时间（包括样品处理）为１０～１５ｍｉｎ。采用单色光源及微型流动比色池，由蠕动泵和电子线路实现自动进样，直接显示测定结果。     

Electron beam forming system for irradiation of large diameter cylindrical products

The report describes electron beam electromagnetic forming system, which is destined for irradiation of cylindrical long goods, specifically for PE tubes 160 mm diameter. System consists of electromagnet, power supply units, beam distributions control units, etc. for use at an electron accelerator at 5 MeV and 50 kW. The particular geometry of the magnet poles and their mutual arrangement are creating an irradiation field that allows the electrons to irradiate the surface of the product close to 90°.     

Nitroarene catalyzed oxidation with sodium percarbonate or sodium perborate as the terminal oxidant

A new catalytic oxidation method for the preparation of aromatic carboxylic acids from methyl aryl ketones is reported. The method is an alternative to the haloform reaction; it is benign and affords the desired product without production of any harmful side products. The catalytic cycle is based on the use of an electron-deficient nitroarene as catalyst with either of the two cheap and green oxidants sodium percarbonate or sodium perborate. The method gives a good yield (87%) and shows excellent selectivity when the model substrate (acetophenone) is oxidized. A series of benzoic acids of industrial interest were prepared by means of this method.     

The Wittig Reaction in Industrial Practice

The effects of a scientific discovery on industrial practice are illustrated with reference to the Wittig reaction. The aim of utilizing the Wittig reaction of linking terpenoid building blocks to give vitamin A and carotenoids on an industrial scale prompted extensive research and development work of a synthetic and chemical engineering nature. The importance of the Wittig reaction and its variants in the synthesis of active compounds and fine chemicals in industrial research is demonstrated in the present article.     

Composite poly(dimethylsiloxane)/glass microfluidic system with an immobilized enzymatic particle-bed reactor and sequential sample injection for chemiluminescence determinations

A three-layer poly(dimethylsiloxane) (PDMS)/glass microfluidic system for performing on-chip solid-phase enzymatic reaction and chemiluminescence (CL) reaction was used for the determination of glucose as a model analyte. A novel method for the immobilization of controlled-pore-glass based reactive particles on PDMS microreactor beds was developed, producing an on-chip solid-phase reactor that featured large reactive surface and low flow impedance. Efficient mixing of reagent/sample/carrier streams was achieved by incorporating chaotic mixer structures in the microfluidic channels. A conventional sequential injection (SI) system was adapted for direct coupling with the microfluidic system, and combined with hydrostatic delivery of reagents to achieve efficient and reproducible sample introduction at 10 μl levels. A detection limit of 10 μM glucose (3σ), and a precision of 3.1% RSD (n=7, 0.2 mM glucose) were obtained using the SI-microfluidic-CL system integrated with a glucose oxidase (GOD) reactor. Carryover was <5% at a throughput of 20 samples/h.