Uniformity in radon exhalation from construction materials using can technique

The uniformity in radon exhalation rates for 46 tiles of granite, marble and ceramic used as construction materials were determined using “Can Technique” employing CR-39 nuclear track detectors (NTDs). On each tile, two sealed cans, each enclosing one NTD fixed at the center of the tile surface area covered by the can, were mounted at two different locations of each individual tiles. The track production rates on the NTDs representing radon exhalation rates were measured. The radon exhalation rates from the surface of individual tiles showed uniform exhalations within the calculated uncertainties of the measured values. This makes Can Technique an alternative simple method to measure radon exhalation rates. Calibration required to convert track production rates into radon exhalation rates for the used can and NTD was done using an active technique. The correlation between the measurements by the two techniques shows a good linear correlation coefficient (0.83).     

视频编码新标准H.264中抗误码技术的研究

介绍了视频编码新标准———H .2 6 4中采用的几种抗误码技术 ,基于这些技术 ,新标准确保了压缩视频流在接收端的恢复质量。     

生长MCT晶体的改进型Bridgman方法：ACRT—B

本文介绍一种经改进的采用加速坩埚旋转技术的Bridgman方法(ACRT-B)及ACRT-B用于生长MCT晶体得到的重要结果。与传统Bridgman方法生长的晶体相比,ACRT-B生长的晶体的径向组份均匀性得到很大改善;有用组份的晶片较多;晶体的结晶度好;主晶粒数目减少。ACRT-B工艺中,影响晶体质量最重要的旋转参数是最大旋转速率,而保持在最大旋转速率的时间和停止时间及反向旋转对结果的影响都很小。     

用于调音台的自动混合技术

本文简要地介绍了自动传声器混合技术的原理以及自动传声器混合器必备的功能,并介绍一种国外新近研制成功的自动混合控制器。     

新型硅芯晶体炉的开发与设计

从分析硅芯晶体生长的工艺特点出发,简要介绍了硅芯晶体生长设备的设计思想以及新近开发设计的新型硅芯晶体炉的机械结构及电气控制系统。     

无人机着陆技术研究

无人机着陆引导在现代无人机中的作用越来越重要。本文介绍了国内外无人机的回收方式,分析了多种着陆引导技术的优缺点,在此基础上,对于未来无人机着陆引导技术进行了展望。     

Ffast Transient Fluorescence Technique to Study Critical Exponents at the Glass Transition

The fast transient fluorescence (FTRF) technique was used to study critical exponents at the glass transition in free-radical crosslinking copolymerization (FCC) for two different monomeric systems, methyl methacrylate (MMA) and styrene (S). Pyrene (P_y ) was used as a fluorescence probe. The fluorescence lifetimes of P_y from its decay traces were measured and used to monitor the gelation process. Changes in the viscosity of the pregel solutions due to glass formation dramatically enhance the fluorescent yield of aromatic molecules. This effect is used to study the glass transition upon gelation of MMA and S monomeric systems as a function of time, at various temperatures and crosslinker concentrations. The results are interpreted in the view of percolation theory. The gel fraction and weight average degree of polymerization exponents β and γ are found to be 0.37 ± 0.02 and 1.66 ± 0.07 in agreement with percolation results.     

面向VANETs的服务质量的一种信道分配的新算法

车辆的高速移动,导致频繁地进行呼叫切换,这就使得信道分配成为车联网VANETs( Vehicular Ad Hoc Network)中最受关注的研究热点。为此,提出一种新的信道分配算法,标记为SBC算法。该算法引用信道再使用技术( Channel Reuse Technique)、信道借用( Channel Borrowing),并依据车辆行驶的速度计算发生切换的时间,从而提高服务质量QoS( Quality of Service)。仿真结果表明,提出的SBC算法在呼叫阻塞概率、丢失率和切换时延方面表现良好的性能。     

Preparation and characterization of fragrance by extracting the essential oils from different raw materials

The extraction is a simple process and it is widely used to extract the fragrances in fragrance industries from essential oils. There are number of compounds (i.e. flowers, oils, leaves etc.) from which we can prepare the fragrance by extracting the essential oils from them. In this work, we have prepared the fragrance from the essential oils by the liquid-liquid extraction process, where the essential oil presented as the concentrated hydrophobic liquid containing volatile aroma compounds. We used the combination of Gas chromatography and Mass spectrometry (GC/MS) characterization techniques to make our product more useful, convenient and compitative with the other fragrance available in the market. This study would be helpful to understand the preparation of the fragrance from the concentrated hydrophobic liquid type essential oils which contains volatile aroma compounds by using a significant liquid-liquid extraction process.     

Relationships among Preparative Technique,Phase Composition and Bending Strength of Bauxite Porcelain

1 INTRODUCTION Bauxite porcelain is a novel “K2O–Al2O3–SiO2” system ceramic by using sintered bauxite, clay and potash feldspar and albite as the main raw materials with the Al2O3’s content of 50%～60(massfraction). Compared to the traditional“K2O–Al2O3–SiO2” feldspar porcelain by using quartz, bolus alb and potash feldspar and albite as the main raw materials, the bauxite porcelain possesses such advantages as high mechanical strength, excellent electrical insula- tion prop…