Graded Heterojunction of AIGalnP High-brightness Light Emitting Diodes

A simple model of the graded heterojunction in AIGalnP compound semiconductors was introduced to analyze the band profile. The band profiles are analyzed with the different grading ways but the same grading length and under the different doping densities. The effect of the different grading lengths on the surplus of the potential of the spike to the potential of N region are also analyzed under the different doping densities. Through the experiments, it proves that the performances of high brightness light emitting diodes can be improved by the effects of the graded heterojunction.     

Fabrication of isotype (p-p) selenium-polyaniline heterojunction diode by electrochemical method

In the present work, for the first time, heterojunction has been fabricated using electrochemically deposited isotype p-selenium-p-polyaniline from a single solution bath. The structural characterization of selenium and polyaniline thin film was carried out using XRD technique. Polyaniline exhibited amorphous structure while selenium offered monoclinic (β) phase. The junction was formed by electrodepositing polyaniline over selenium film and heating at 423 K. The current density versus voltage (J-V) plot showed the formation of a junction with ideality factor of 1.16. From J-V characteristics at different temperatures, static resistance (R_s), dynamic resistance (R_d), and rectification ratio of diodes were determined. Heat treatment above 448 K caused junction breakdown.     

MEH-PPV/SiO_2异质结发光机理和非晶SiO_2二次特性的研究

在薄膜电致发光中采用有机聚合物MEH-PPV和无机半导体SiO_2复合制成异质结发光器件,利用SiO_2的加速、倍增和离化的二次特性,实现了固态阴极射线发光.结构为ITO/SiO_2/MEH-PPV/SiO_2/Al的发光器件,其电致发光光谱的显著特征是有两个发光谱带.光谱中除了波长较长(峰值为583 nm)的MEH-PPV的激子发光谱外,还观察到了波长较短(峰值为403 nm)的蓝色发光谱,并且长短波的发光强度随着电压的不同而变化.电压较低时,只有长波光发射.当电压较高时,只有短波光存在.这种有两个谱带的发光是固态阴极射线发光的独特标志,它是一种全新的激发方式,引发出发光学中一些新而重要的问题.固态阴极射线发光理论的重要方面之一就足SiO_2的二次特性.文章研究了固态阴极射线发光动力学问题,高电场下SO_2二次特性及厚度对二次特性的影响.     

Spin-filter silicene devices induced by asymmetric electrodes

Using nonequilibrium Green's function in combination with the density functional theory, we investigate the spin-dependent transport properties of three silicene-based heterojunctions. The calculated results show that the heterojunctions are promising multifunctional devices in spintronics due to their nearly perfect bipolar spin-filter effect and high rectification ratio. Also shown are the obvious negative differential resistance behaviors for both spin channels. By analyzing the spin-resolved transmission spectra and the band structure of ZSiNR electrodes, as well as the spatial resolved local density of states, the mechanisms for these intriguing properties are demonstrated in detail.     

Fabrication and characterization of n-ZnO on p-SiC heterojunction diodes on 4H-SiC substrates

We report on the growth and characterization of n-ZnO/p-4H-SiC heterojunction diodes. Our n-ZnO layers were grown with radical-source molecular beam epitaxy (RS-MBE) on p-4H-SiC epilayers, which was previously prepared in a horizontal hot-wall reactor by chemical vapour deposition (CVD) on the n-type 4H-SiC wafers. Details on the n-ZnO growth on 8-off 4H-SiC wafers, the quality of the layers and the nature of realized p–n structures are discussed. Mesa diode structures were fabricated. Al was sputtered through a circle mask with diameter 1 mm and annealed to form Ohmic contacts to p-SiC. Ohmic contacts to the n-ZnO were formed by 30 nm/300 nm Ti/Au sputtered by electron beam evaporation. Electrical properties of the structures obtained have been studied with Hall measurements, and current–voltage measurements (I–V). I–V measurements of the device showed good rectifying behavior, from which a turn-on voltage of about 2 V was obtained.     

高可见光催化降解污染物和产氢活性的Z型N-掺杂K4Nb6O17/g-C3N4异质结

随着人口增长和全球工业化进程加快,人们饱受环境污染和能源短缺问题的困扰.半导体光催化技术作为一种高效、可持续、环境友好、有潜力的新技术,在环境净化和能源开发方面有着广阔的应用前景.到目前为止,人们已开发出多种半导体光催化剂,并广泛应用于污染物降解、氢气制备和二氧化碳还原等领域.其中,化合物K4Nb6O17具有典型的层状结构、合适的电子能带结构、结构易改性以及良好的电荷传输性能等特点,在光催化领域得到了广泛研究.然而,单纯K4Nb6O17仍存在光响应范围窄、光生载流子复合率高等问题,限制了K4Nb6O17的进一步应用.因此,需要对K4Nb6O17进行改性,拓宽其光吸收范围,提高其光生载流子分离效率,从而提高其光催化活性.本研究通过简单焙烧法制备Z型N-掺杂K4Nb6O17/g-C3N4(KCN)异质结光催化剂,其中石墨相氮化碳(g-C3N4)在复合材料中质量比约为50%.层状K4Nb6O17层板的电子结构通过N掺杂进行调控,拓宽其光响应范围,使其具有可见光响应;同时,形成的g-C3N4位于N-掺杂K4Nb6O17的外层以及内层空间,在这两种组分之间形成异质结,有利于提高光生载流子的分离效率.荧光光谱、时间分辨荧光光谱和光电化学测试表明,N掺杂和异质结的形成有利于增强光生电子-空穴对的传输和分离效率.通过在可见光照射下降解罗丹明B(RhB)和产氢来评估材料的光催化性能.相比g-C3N4(8.24μmol/h)和Me-K4Nb6O17(~1.30μmol/h),KCN复合材料光催化产氢效率(~16.91μmol/h)得到了极大提高,并显示出极好的光催化产氢稳定性能.对于光催化降解RhB体系,KCN复合材料也显示出较好的光催化活性和稳定性,并能很好地将RhB矿化.鉴于KCN复合材料具有较小的比表面积(9.9 m^2/g)且无孔结构,认为比表面积对光催化活性影响较小.因此,与单组分相比,KCN复合材料光催化产氢和RhB降解活性都得到了极大提高,活性的增强主要归功于N掺杂和异质结形成的协同效应,其中N掺杂可以拓宽光捕获能力,异质结形成可提高电荷载流子的分离效率.电子自旋共振(ESR)谱表明,在KCN降解RhB体系中,超氧自由基(·O2^?)、羟基自由基(·OH)和空穴(h^+)作为主要活性物质都参与了反应.结合实验结果可以推测KCN复合材料满足了Z型光催化体系,该体系具有高效的光生载流子分离效率和较高的氧化还原能力.     

Impact of pressure on transport properties of AlGaN/GaN high electron mobility transistor

The properties of Al_xGa_1−xN/GaN high electron mobility transistor (HEMT) impacted by pressure are characterized quantitatively. The results indicate that the dislocation density increases as the critical thickness decreases with increasing pressure. The two-dimensional electron gas density was found to be linearly changeable with the pressure. A simulation has been completed to verify the influence of electron mobility. The results show that the misfit dislocation scattering induced by the pressure is a major limiting factor for the properties of HEMT.     

ZnO掺杂的SnO_2纳米纤维的制备、表征及气敏机理(英文)

以二水氯化亚锡(SnCl2·2H2O)为盐原料,采用静电纺丝的方法制备了SnO2纳米纤维.为了研究ZnO掺杂对SnO2形貌、结构及化学成分的影响,分别制备了不同含量ZnO掺杂的SnO2/ZnO复合材料.利用热重-差热分析(TG-DTA)、X射线衍射(XRD)、傅里叶变换红外(FTIR)光谱仪、扫描电镜(SEM)及能量色散X射线(EDX)光谱对材料的结晶学特性及微结构进行了表征.制备的SnO2/ZnO复合材料是由纳米量级的小颗粒构成的分级结构材料.ZnO含量不同,对应的SnO2/ZnO复合材料结构不同.表征结果表明ZnO的掺杂量对SnO2材料的形貌及结构均起着重要作用.将制备的不同ZnO含量的SnO2/ZnO复合材料进行气敏测试,测试结果表明,Sn:Zn摩尔比为1:1制作的气敏元件对甲醇的灵敏度优于其它摩尔比的气敏元件.讨论了SnO2/ZnO复合材料气敏元件的敏感机理.同时针对Sn:Zn摩尔比为1:1时表现出最好的气敏响应,分析了其原因,包括Zn的替位式掺杂行为、ZnO的催化作用、过量ZnO对SnO2生长的抑制作用以及SnO2与ZnO晶粒界面处的异质结.     

Boosting Photocatalytic Oxygen Evolution: Purposely Constructing Direct Z-Scheme Photoanode by Modulating the Interface Electric Field

Ti-Fe₂O₃ photoanode has received widespread attention in photoelectrochemical(PEC) water spilling because of its optimized oxidative and reductive capability of composites catalyst. However, its low efficiency could limit its development. Herein, in order to improve the efficiency of PEC water spilling, the all-solid-state direct Z-scheme Ti-ZnFe₂O₄/Ti-Fe₂O₃(TZFO/Ti-Fe₂O₃) nanorod arrays composited with the ideal energy band structure are synthesized by modulating the Fermi level of TZFO for PEC water splitting. The photophysical methods in this work, including the Kelvin probe measurement and transient photovoltage spectroscopy(TPV) measurement, are applied to explore the migration behavior of electric charges at the enhanced interface electric field. Finally, the Z-scheme charge transfer mechanism of TZFO/Ti-Fe₂O₃ photoanode is proved successfully. Benefiting from the desirable charge transfer at interface electric field, the TZFO/Ti-Fe₂O₃ exhibits the outstanding photocatalytic oxygen evolution reaction(OER) performance, and the photocurrent of 60TZFO/Ti-Fe₂O₃ photoanode reaches 2.16 mA/cm² at 1.23 V vs. reversible hydrogen electrode(RHE), which is three times higher than that of pure Ti-Fe₂O₃ photoanode. This work provides a facile approach of modulating interface electric field to optimize the Z-scheme charge-transfer process.     

CeO2 nanofibers-CdS nanostructures n–n junction with enhanced visible-light photocatalytic activity

In the present work, the n-cerium (IV) oxide (CeO₂)/n-cadmium sulfide (CdS) composite nanofibers were successfully synthesized via a facile electrospinning and hydrothermal synthesis strategy. The physicochemical properties of the synthesized composite nanofibers were investigated by using X-ray diffraction (XRD), field emission scanning electron microscope (FESEM), energy Dispersive X-Ray Spectroscopy (EDS), diffuse Reflectance Spectroscopy (DRS), Fourier-transform infrared (FTIR), photoluminescence (PL), Brunauer–Emmett–Teller (BET) and Raman spectroscopy analysis. The activities of the CeO₂/CdS were evaluated through the photocatalytic degradation of Rose Bengal (RB) in an aqueous solution under blue LED light radiation. CeO₂/CdS composites exhibit higher photocurrent density in photocurrent response experiment and smaller charge-transfer resistance in electrochemical impedance spectroscopy (EIS). Overall, the results confirmed higher charge separation efficiency in CeO₂/CdS composites compared to pristine CeO₂ nanofibers, and CdS, which is related to intimately contact among the CeO₂, and CdS. The present work provides a new approach to construct n-n heterojunction photocatalysts based on electrospinning and a deeper insight for the photocatalytic degradation activity. In addition, possible degradation mechanism and pathways were proposed according to the identified intermediates.