圆锥形零件冲压变形与成形载荷的分析

由于悬空侧壁部分的变形状态是圆锥形零件成形的关键，而径向拉应力是实现悬空部分成形的必要条件，同时也是该部分冲压成形成败的关键为此，经力学分析得出了侧壁部分径向拉应力的解析式和造成圆锥形零件破裂的最大径向拉应力的计算式。同时分析了圆锥形零件的成形载荷。     

Electrospraying: an in-situ polymerisation route for fabricating high macroporous scaffolds

This paper reports a direct jet-based polymerisation by polycondensation approach to forming a self-supporting scaffold structure. The processing technique is electrospraying, which is also known as electrohydrodynamic atomization. A specially formulated ethanolic siloxane sol derived from alkoxysilanes was synthesised and electrosprayed using a ring-shaped ground electrode configuration. The medium was seen to electrospray in the stable cone-jet mode, which later gave rise to the growing or forming of “fir-tree” like structures. The materials were characterised using microscopy, solid state NMR, FTIR, XRD and DSC. Hence this paper explains the direct controlled polycondensation from the siloxane sol and further presents the basis by which these scaffolds take shape.     

Simulation of forming processes by FEM with a Bingham fluid model

We model the forming process as a fluid flow. A finite element program, FIDAP, which analyses flow problems, was used to calculate velocity and strain rates at points throughout the material during the deformation process. This allows predictions to be made on the shape and quality of the resulting part. The stress-strain relation we used models the plastic flow of metals (Bingham fluids). The FEM approximation of such a fluid is tested by comparing results for a simple analytical example. In forming processes provision must be made for friction between dye and workpiece, and the program was modified accordingly. Two classical ring forming simulations are compared to published results.     

MIMO技术及在3G中的应用

介绍MIMO技术的定义和历史,从空间复用、传输分集技术、波束成型等方面对MIMO技术进行说明,并对MIMO在3G(HSPA+)中的应用做了简单的描述。     

Simulation of beam plastic forming with variable bending moments

A versatile generic elastic/plastic moment/curvature equation is used to simulate beam deflections. Solutions are obtained numerically and used to investigate whether forming equations based on the assumption of pure bending can be extended in a rational way to more complicated loadings. It is concluded that the answer is affirmative, with only knowledge of the elastic/plastic behavior associated with pure bending and the elastic behavior associated with the actual loading being needed to make the extension.     

Flexible fiber motion in the flow field of a cylinder

In the forming section of a papermachine, a water suspension of pulp fibers is drained through a forming fabric. One canonical test case that incorporates some key features of this process is that which studies the interaction of a single fiber with a cylinder. This article concerns numerical simulations of this interaction.     

MIMO原理及其在移动通信中的应用

多入多出（MIMO）或多发多收天线（MTMRA）技术,是无线移动通信领域智能天线技术的重大突破,该技术能在不增加带宽的情况下,成倍地提高通信系统的容量和频谱利用率,是新一代移动通信系统采用的关键技术.     

氢对PbZr0.5Ti0.5O3在氮氢混合气氛退火中铁电性能的影响

采用基于密度泛函理论的第一性原理, 针对PbZr0.5Ti0.5O3无氢和含氢的顺电相和铁电相的二层超晶胞, 分别计算了Ti沿c轴位移时体系总能量的变化、电子云密度分布和Ti—O、Zr—O和H—O的重叠布居数. 结果表明, 含氢铁电相的Ti—O键和Zr—O键相对无氢铁电相明显减弱, 氢氧之间较强的轨道杂化使它们趋于形成共价键; 晶格中氢氧键的钉扎效应使含氢情况下的顺电相能量始终低于铁电相能量, 说明氢的引入阻碍了PbZr0.5Ti0.5O3从立方顺电相到四方铁电相的相变, 并推断其为含氢气氛退火过程中PbZr0.5Ti0.5O3铁电性能下降的主要原因之一. 所得结果对于深入理解铁电材料在氮氢混合气氛退火后铁电性能下降的微观机制具有参考价值.     

Effect of nonlinear strain paths on forming limits under isotropic and anisotropic hardening

The path-dependence of the conventional Forming Limit Diagram (FLD) is an important issue for its applications in industry. Great efforts have been made to understand the nature of the path-dependence with both experimental and theoretical approaches, many of them attempting to find a path-independent way for the application of forming limits. In this paper, we focus on the nonlinear strain path effect on forming limit predictions using both isotropic and anisotropic hardening models. The Forming Limit Diagram (FLD), Forming Limit Stress Diagram (FLSD) and Forming Limit Effective Strain Diagram (epFLD) of sheet metals subject to linear and nonlinear strain paths are analyzed and compared using the Marciniak–Kuczynski approach. An anisotropic hardening model based on Yoshida and Uemori development is adopted in this study, and it is coupled with the traditional Hill’48 yield surface. This model is capable of describing the complex Bauschinger phenomenon after the material undergoes the reverse loading process such as the early re-yielding, work-hardening stagnation and permanent softening. Two different scenarios for the change of strain paths are also investigated. In the first scenario, the sheet material is initially loaded with a fixed strain increment ratio, unloaded to the free stress state, and then reloaded with a different strain increment ratio until the forming limit is reached. In the second scenario, the material does not undergo elastic unloading. Instead, the strain path is abruptly changed to a different strain increment ratio and the material undergoes continuous loading until the forming limit is reached. It is found that the work-hardening behavior after the pre-straining and the loading scenario plays an important role in the path dependent behavior of forming limits. Detailed analysis reveals that the M–K approach may have contributed to the significance of path-dependence observed in this study, especially at high pre-strain levels.