Grafting onto poly(ethylene terephthalate) driven by 172 nm UV light

The reactivity of the surface of poly(ethylene terephthalate) (PET) film under 172 nm UV irradiation (xenon excimer lamp) towards nitrogen-borne 1-octene, n-nonane and heptafluorodecene vapor was investigated. Materials receiving from 0 to 24 J/cm² of UV were examined by X-ray photoelectron spectroscopy (XPS), time of flight secondary ion mass spectroscopy (ToF/SIMS), water and mineral oil contact angle measurement and atomic force microscopy (AFM). A uniform nanoscale layer developed on PET surface attributed to the grafting reaction between photolytically-produced polymer radicals and vapor phase molecules.     

Study of the pulsed laser vapor doping of Si(1 0 0) with KrF excimer laser and BCl3 gas

The properties of pulsed laser vapor doping on p-Si(1 0 0) with a KrF (248 nm) excimer pulsed laser (248 nm) and BCl₃ gas are reported in this paper. The doped samples are characterized by the resistance measured using a four-probe method, since the sheet resistance changes with the carrier concentration of the sample. The doping effects with the variation of laser energy density, pulse number, and the pressure of BCl₃ were investigated in terms of the sheet resistance. In this way, the optimized parameters were obtained and used for the positive heavy doping on p-Si(1 0 0) and p-Si(1 1 1). Then, using a square mesh under the above conditions, an image doping was completed. Finally, the metal–semiconductor Ohmic contacts were realized by plating Ag and Cu films on the doped surface.     

SiGe: An attractive material for post-CMOS processing of MEMS

This work gives an overview of the different developments for silicon germanium (Si_1−xGe_x) from a MEMS post-processing perspective. First, the maximum processing temperature that does not introduce any damage or degradation into the standard characteristics of the CMOS driving electronics is specified. Then, the optimal type of silicon and germanium gas sources and deposition technique that results in an economical process are identified. Next, the selection criteria for a low thermal budget doping method and doping species are discussed. Finally, the advantage and disadvantage for the different approaches implemented for enhancing the physical properties of poly Si_1−xGe_x at a CMOS backend compatible temperature are highlighted. It is shown that the optimal method depends on the application requirements and the CMOS technology used for realizing the driving electronics.     

Size of Micelles Determined by Static Fluorescence Quenching

We developed a new method to measure the average aggregation number of large rod-like micelles using static fluorescence self-quenching of a solubilized fluorophore. The method is based on the increase of self-quenching of micelle-solubilized pyrene through excimer formation. We consider the effect of random distribution of pyrene in micelles and the micellar size distribution. The measured average aggregation <n> _M is based on a new M-weighted raging similar to our exponential-weighted averaging in the transient decay method. We apply this method to study the effect of a large concentration of salt on the average aggregation behavior of sodium dodecyl sulfate (SDS) and cetyle tetraammonium bromide (CTAB). The sizes increase with increasing ionic concentrations. For SDS, we used the thermodynamic model developed by Missel et al. to calculate < n > _M which we compare with experimental results.     

聚合物系统中的传能和光化学

评论了聚合物系统中非辐射能量传递类型,影响能量传递的因素,以及能量传递同聚合物光化学的关系,附22篇文献。     

4,4′-[1,n-亚烷基双[(E)-2-(4-氧苯基)乙烯基]]双吡啶的光化学性质

通过E-[4-[2-(4-羟基苯基)乙烯基]吡啶与1,n-二溴烷烃亲核取代反应合成了4,4′-[1,n-亚烷基双[(E)-2-(4-氧苯基)乙烯基]]双吡啶[n=2(Ia),3(Ib),4(Ic),6(Id)].用元素分析、红外、紫外和质子核磁共振谱鉴定了Ia～Id的结构.将Ia～Id的稀溶液用中压汞灯和低压汞灯交替照射,发现其分子内光环加成反应的存在,并且随着亚烷基碳链的延长,反应速度加快.研究还发现锌离子可以与吡啶环上氮原子发生螯合作用使分子内光环加成反应加快.本文化合物荧光很弱,在较高浓度下有较强分子间激基缔合物荧光.     

稀溶液中环型聚苯乙烯的激基缔合物荧光效应

采用乙酸乙酯为环型和线型聚苯乙烯的非良溶剂, 确定了Mark-Houwink方程分别为[η]_r=1.91×10~(-2)·M~(0.607)和[η]_l=4.06×10~(-2)·M~(0.572)。研究了环型和线型聚苯乙烯的激基缔合物的荧光效应。通过稀溶液中环型和线型高分子线团在柔顺性上存在着差异, 解释了二者之间在荧光效应方面的差异, 并根据实验结果,确定了(I_E/I_M)c→0～M关系式分别为(I_E/I_M)r,c→0=1.91+3.40×10~(-6)M和(I_E/I_M)l,c→0=2.15+3.05×10~(-6)M。     

一类新型荧光化学敏感器形成激基缔合物的温度效应

对一类具有分子识别功能的荧光分子敏感器化合物，在水溶液中形成的分子内激基缔合物的温度效应进行了研究。进而提出该类化合物在水溶液中进行了内单体和分子内激基缔合物转化的机制。通过分析所得的热力学数据，同文献值相比较，推导出该类化合物在水溶液中可能存在的几何构型，为该类化合物在作为探针应用时提供理论依据。     

Luminescence and electroluminescence of bis (2-(benzimidazol-2-yl) quinolinato) zinc. Exciplex formation and energy transfer in mixed film of bis (2-(benzimidazol-2-yl) quinolinato) zinc and N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine

The absorption and emission properties of benzimidazol-2-yl-quinoline (BIQ) and bis (2-(benzimidazol-2-yl) quinolinato) zinc (ZnBIQ) a new emitter used for organic light emitting device (OLED) were reported. Exciplexes are observed for ZnBIQ with N,N′-bis-(1-naphthyl)-N,N′-diphenyl-1,1′-biphenyl-4,4′-diamine (NPB) system, in both electro- and photoluminescent processes. The identification of exciplex emission in co-evaporated and multi-layer ZnBIQ thin film was reported for the first time. The optical formation of the exciplex involves the excitation of a single molecule, followed by the relaxation of that exciton into a lower energy exciplex state. Both BIQ and ZnBIQ possess very high thermal stabilities and can be purified by subliming under the high vacuum condition. Devices consisting of ZnBIQ as the emitting layer have been fabricated, and the emission spectra of ZnBIQ-base devices gave a voltage-dependent spectrum, with the red emission observed (3-7 V), switching over to strong white emission as the bias was raised.     

The microenvironment in polymer solids with added plasticizers. An attempt to measure the size and distribution of free volume in poly(methyl methacrylate) solids

Various amounts of n-alkylbenzenes (C_n: C₆H₅-C_nH_2n+1 (n = 3-16)) were doped into poly(methyl methacrylate) (PMMA) films, and the emission and thermal properties of each film were measured in detail together with their solid-state ¹³C NMR spectra. The aim of the present work was to estimate the size distribution of free volume in amorphous regions of polymer solids heavily doped with plasticizers by using C_n as models of a plasticizer. The excimer fluorescence yields of C_n in PMMA were found to depend on both the amount of C_n and the length of the alkyl chains of C_n, although the fluorescence spectra of all of the C_ns in dilute fluid solution were almost the same. The quantitative analysis showed: (1) C_n with n ? 12 induces a phase separation in PMMA, in which almost all of the C_n molecules are in a separated phase, and thus they cannot penetrate regions in which PMMA chains are aggregated. This means that C_n with n ? 12 cannot enlarge the space between PMMA chains. (2) Smaller C_n (n < 11) can enter free volumes between PMMA chains that correspond to their molecular size, but they can enlarge them only to a limited extent. Thus, the amount by which plasticization can increase the free volume of PMMA is limited by the size of the dopant and the inherent free volume of the polymer matrix. (3) The efficiency of excimer formation was found to reveal the maximum amount of C_n that could fit in the free volume of PMMA. Thus our fluorescence measurements showed that PMMA solids that were plasticized to their limit had a free volume that was larger than the volume occupied by all the conformers of C₅ and smaller than the volume occupied by almost all the conformers of C₁₂. In conclusion, we were able to obtain information on plasticization and to demonstrate a method of monitoring microenvironments in polymer solids after they have been doped with plasticizers.