简化形式的系统EMC预测分析技术概述

本文探讨了系统级简化形式的电磁兼容性预测分析方法，该方法对于只有几对发-收干扰对的系统EMI的预测分析简洁有效，它避免了大系统间繁复的建模与大量的数据采集及其计算工作，从而对于只考虑其结果的系统间的EMC预测分析提高了效率。     

CMP系统技术与市场

概述了CMP系统技术的发展历史、发展趋势以及在IC生产中的重要性,介绍了国外CMP设备主要制造厂家的设备型号和性能及CMP设备市场分布和需求,阐述了CMP系统技术的基础研究、关键技术和国内研究概况。     

Acoustic characterization and prediction for fan-duct-plenum-room integrations

This paper investigates mutual influence of duct and room acoustics in the whole fan-duct-plenum-room integrations. Applying the parametric design language of finite element software ANSYS (APDL), dimensional and positional influence on system acoustics has been studied. Models with different room dimensions, duct lengths, duct cross-sections, duct locations, duct discharges and duct elbow were constructed, and their characteristics were compared qualitatively. Results show that small rooms, short ducts, large duct cross-sections and bell mouth duct discharges help to increase room sound pressure levels (SPLs); SPLs in ducts and plenums are sensitive to duct dimensions and duct discharge types but insensitive to duct locations and room dimensions; duct elbows have relatively indistinct acoustic influence in each component. Based on the calculation results, a semi-experimental method was proposed for simply and approximately evaluating indoor acoustic spectra of fan-duct-plenum-room integrations, then an example was used to demonstrate the prediction process. Finally, by adopting several ideal models, sound field constitutions, duct and room wall admittances and duct end reflection were explored quantitatively. This study may give a detailed understanding of fan-duct-plenum-room acoustics for researchers, also it might provide a new, simple and approximate prediction method for professionals to evaluate and improve fan-ducted acoustics.     

The effect of construction material, contents and room geometry on the sound field in dwellings at low frequencies

An experimentally validated finite element method is used to model the sound level in rooms at low frequencies. It is demonstrated that the dimensions of rectangular rooms strongly influence the sound pressure level difference. Additional factors were investigated which are not normally considered in the frequency range where diffuse sound field conditions can be assumed. Three effects were investigated: room damping due to wall vibrations, furniture, the effect of small deviations from simple rectangular shapes. It is confirmed by field measurements that the vibrations of masonry walls and floors introduce less damping than surfaces of lightweight construction. Assigning to the FE model a damping equivalent to a surface absorption of 0.02 reproduces the effect of walls of heavyweight construction. Damping equivalent to a surface absorption of 0.15 reproduces the effects of plastered timber-frame walls, floors and ceilings. The work was briefly extended to a room pair built with heavyweight and lightweight material of construction. The modification of the shape of the room frequency response highlights well the effect of material of construction. In-situ and laboratory measurements show that furniture has little effect on steady-state room response below 100 Hz. Modelling a wall recess smaller than 0.5 m improved the agreement between prediction and measurements but the assumption of a simple rectangular room remains appropriate.     

厅堂音质的听觉化模拟技术

厅堂音质的听觉化模拟技术是计算机技术、室内声学、电声技术相结合的双耳听觉化模拟技术，是新一代的厅堂音质ＣＡＤ技术的关键。同时听觉化模拟技术也为未来新的立体声制式的出现提供了可能性，这对未来的数字立体声广播、多媒体广播都可能产生巨大的潜在影响。本文对此项技术的原理、声场模拟、听演化实现过程、软件研究及应用前景等作了简要的介绍。     

固体基质室温燐光法测定L-色氨酸

本文提出在Na_2 CO_3存在下,以NaI为重原子微扰剂,以滤纸为基质的L-色氨酸的室温燐光(RTP)测定法。本法不需通干燥气体,工作曲线的线性范围较宽,用于谷物试样分析,得到了满意的结果。     

Synthesis of multi-hydroxyl and sulfonyl dual-functionalized room temperature ionic liquids

Starting from the hydroxylamine (dimethyl amino ethanol, triethanolamine) and 1,3-propane sultone, a series of hydroxyl and sulfonyl dual-functionalized zwitterionic salts and corresponding acidic room temperature ionic liquids have been synthesized. The hydroxyl groups of the synthesized substances were confirmed by the 1H NMR measurement. These zwitterionic salts and ionic liquids may be used for synthesizing other functionalized ionic liquids or ionic liquid-polymer (polyelectrolyte).     

以阴离子交换纤维素膜作基质室温燐光法测定痕量2,6-二氨基嘌呤的研究

本文对2,6-二氨基嘌呤(DAP)在不同的基质上和不同的重原子微扰剂存在下的室温燐光(RTP)强度进行比较,结果表明,NaI-NaAc是有效的重原子体系。适宜的固体基质为阴离子交换纤维素(二乙氨基乙基纤维素)膜(DEAE)和慢速定量滤纸。前者对酸度的变化具有较好的缓冲能力,本文提出了以DEAE为固体基质,测定痕量DAP的RTP法。     

Selecting parameters and limits for equipment operational qualification

While operational qualification (OQ) is a well-established term within equipment qualification, users of equipment often become unsure when it comes to implementation. The biggest problem is how to select procedures and acceptance criteria. Should these be the vendor's specifications or should the users define their own limits, and, if so, how? Should all instruments of the same type have the same values or should these be optimized for each individual instrument? This article will provide an overall strategy and specific examples for HPLC on how to select procedures and acceptance limits that are based on efficient use of resources, on practicality and on the intended use of the equipment.